On Thu, 14 May 2015, Jon Hunter wrote:
> On 14/05/15 08:40, Lee Jones wrote:
> > On Thu, 14 May 2015, Jon Hunter wrote:
> >> On 13/05/15 15:39, Lee Jones wrote:
> >>> On Mon, 04 May 2015, Andrew Bresticker wrote:
> >>>
> >>>> Add a binding document for the XUSB host complex on NVIDIA Tegra124
> >>>> and later SoCs. The XUSB host complex includes a mailbox for
> >>>> communication with the XUSB micro-controller and an xHCI host-controller.
> >>>>
> >>>> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> >>>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> >>>> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> >>>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> >>>> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> >>>> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> >>>> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> >>>> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> >>>> ---
> >>>> Changes from v7:
> >>>> - Move non-shared resources into child nodes.
> >>>> New for v7.
> >>>> ---
> >>>> .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 ++++++++++++++++++++++
> >>>> 1 file changed, 37 insertions(+)
> >>>> create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >>>> new file mode 100644
> >>>> index 0000000..bc50110
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >>>> @@ -0,0 +1,37 @@
> >>>> +NVIDIA Tegra XUSB host copmlex
> >>>> +==============================
> >>>> +
> >>>> +The XUSB host complex on Tegra124 and later SoCs contains an xHCI host
> >>>> +controller and a mailbox for communication with the XUSB micro-controller.
> >>>> +
> >>>> +Required properties:
> >>>> +--------------------
> >>>> + - compatible: For Tegra124, must contain "nvidia,tegra124-xusb".
> >>>> + Otherwise, must contain '"nvidia,<chip>-xusb", "nvidia,tegra124-xusb"'
> >>>> + where <chip> is tegra132.
> >>>> + - reg: Must contain the base and length of the XUSB FPCI registers.
> >>>> + - ranges: Bus address mapping for the XUSB block. Can be empty since the
> >>>> + mapping is 1:1.
> >>>> + - #address-cells: Must be 2.
> >>>> + - #size-cells: Must be 2.
> >>>> +
> >>>> +Example:
> >>>> +--------
> >>>> + usb@0,70098000 {
> >>>> + compatible = "nvidia,tegra124-xusb";
> >>>> + reg = <0x0 0x70098000 0x0 0x1000>;
> >>>> + ranges;
> >>>> +
> >>>> + #address-cells = <2>;
> >>>> + #size-cells = <2>;
> >>>> +
> >>>> + usb-host@0,70090000 {
> >>>> + compatible = "nvidia,tegra124-xhci";
> >>>> + ...
> >>>> + };
> >>>> +
> >>>> + mailbox {
> >>>> + compatible = "nvidia,tegra124-xusb-mbox";
> >>>> + ...
> >>>> + };
> >>>
> >>> This doesn't appear to be a proper MFD. I would have the USB and
> >>> Mailbox devices probe seperately and use a phandle to point the USB
> >>> device to its Mailbox.
> >>>
> >>> usb@xyz {
> >>> mboxes = <&xusb-mailbox, [chan]>;
> >>> };
> >>>
> >>
> >> I am assuming that Andrew had laid it out like this to reflect the hw
> >> structure. The mailbox and xhci controller are part of the xusb
> >> sub-system and hence appear as child nodes. My understanding is that for
> >> device-tree we want the device-tree structure to reflect the actual hw.
> >> Is this not the case?
> >
> > Yes, the DT files should reflect h/w. I have requested to see what
> > the memory map looks like, so I might provide a more appropriate
> > solution to accepting a pretty pointless MFD.
>
> For the xusb-host has memory from 0x7009000 - 0x7009ffff.
>
> Within this range, we have this fpci range which is defined as 0x7009800
> - 0x70098fff. This range is being shared between the mailbox and xhci
> drivers. Looking at the drivers, we have ...
>
> mailbox uses: 0x700980e0 - 0x700980f3 and 0x70098428 - 0x7009842b.
> xhci uses: 0x70098000 - 0x700980cf and 0x70098800 - 0x70098803.
>
> So it is a bit messy as they overlap. However, we could have ...
>
> xusb_mbox: mailbox {
> compatible = "nvidia,tegra124-xusb-mbox";
> reg = <0x0 0x700980e0 0x0 0x14>,
> <0x0 0x70098428 0x0 0x4>;
> ...
> };
> usb-host@0,70090000 {
> compatible = "nvidia,tegra124-xhci";
> reg = <0x0 0x70090000 0x0 0x8000>,
> <0x0 0x70098000 0x0 0x00d0>;
> <0x0 0x70098800 0x0 0x0004>;
> <0x0 0x70099000 0x0 0x1000>;
> ...
> };
>
> I believe that Thierry and Stephen said that they wished to avoid
> multiple devices sharing the same memory ranges, and so we would need to
> divvy up the memory map as above. However, I am not sure if this is an
> ok thing to do.
>
> > Two solutions spring to mind. You can either call
> > of_platform_populate() from the USB driver, as some already do:
> >
> > drivers/usb/dwc3/dwc3-exynos.c:
> > ret = of_platform_populate(node, NULL, NULL, dev);
> > drivers/usb/dwc3/dwc3-keystone.c:
> > error = of_platform_populate(node, NULL, NULL, dev);
> > drivers/usb/dwc3/dwc3-omap.c:
> > ret = of_platform_populate(node, NULL, NULL, dev);
> > drivers/usb/dwc3/dwc3-qcom.c:
> > ret = of_platform_populate(node, NULL, NULL, qdwc->dev);
> > drivers/usb/dwc3/dwc3-st.c:
> > ret = of_platform_populate(node, NULL, NULL, dev);
> > drivers/usb/musb/musb_am335x.c:
> > ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
> >
> > Or use the "simple-mfd", which is currently in -next:
> >
> > git show next/master:Documentation/devicetree/bindings/mfd/mfd.txt
>
> That is nice. Sounds like the "simple-bus" style of device but for an
That's precisely what it does. FYI: You 'can' use "simple-bus" and it
will do the right thing, but as an MFD isn't really a bus, it was
decided to create something a little more fitting.
> mfd. Based upon the above, let me know if you think we could use the
> "simple-mfd"?
I do. :)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
