Re: [PATCH 1/3] phy-sun4i-usb: Add a sunxi specific function for setting squelch-detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sun, May 10, 2015 at 12:02:54PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 08-05-15 18:06, Felipe Balbi wrote:
> >Hi,
> >
> >On Sun, Mar 29, 2015 at 12:50:46PM +0200, Hans de Goede wrote:
> >>The sunxi otg phy has a bug where it wrongly detects a high speed squelch
> >>when reset on the root port gets de-asserted with a lo-speed device.
> >>
> >>The workaround for this is to disable squelch detect before de-asserting
> >>reset, and re-enabling it after the reset de-assert is done. Add a sunxi
> >>specific phy function to allow the sunxi-musb glue to do this.
> >>
> >>Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> >>---
> >>  drivers/phy/phy-sun4i-usb.c       |  9 +++++++++
> >>  include/linux/phy/phy-sun4i-usb.h | 26 ++++++++++++++++++++++++++
> >>  2 files changed, 35 insertions(+)
> >>  create mode 100644 include/linux/phy/phy-sun4i-usb.h
> >>
> >>diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
> >>index 221e8ab..01eb08d 100644
> >>--- a/drivers/phy/phy-sun4i-usb.c
> >>+++ b/drivers/phy/phy-sun4i-usb.c
> >>@@ -33,6 +33,7 @@
> >>  #include <linux/of_address.h>
> >>  #include <linux/of_gpio.h>
> >>  #include <linux/phy/phy.h>
> >>+#include <linux/phy/phy-sun4i-usb.h>
> >>  #include <linux/platform_device.h>
> >>  #include <linux/regulator/consumer.h>
> >>  #include <linux/reset.h>
> >>@@ -75,6 +76,7 @@
> >>  #define PHY_OTG_FUNC_EN			0x28
> >>  #define PHY_VBUS_DET_EN			0x29
> >>  #define PHY_DISCON_TH_SEL		0x2a
> >>+#define PHY_SQUELCH_DETECT		0x3c
> >>
> >>  #define MAX_PHYS			3
> >>
> >>@@ -322,6 +324,13 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
> >>  	return 0;
> >>  }
> >>
> >>+void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
> >>+{
> >>+	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
> >>+
> >>+	sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
> >>+}
> >>+
> >>  static struct phy_ops sun4i_usb_phy_ops = {
> >>  	.init		= sun4i_usb_phy_init,
> >>  	.exit		= sun4i_usb_phy_exit,
> >>diff --git a/include/linux/phy/phy-sun4i-usb.h b/include/linux/phy/phy-sun4i-usb.h
> >>new file mode 100644
> >>index 0000000..50aed92
> >>--- /dev/null
> >>+++ b/include/linux/phy/phy-sun4i-usb.h
> >>@@ -0,0 +1,26 @@
> >>+/*
> >>+ * Copyright (c) 2015 Hans de Goede <hdegoede@xxxxxxxxxx>
> >>+ *
> >>+ * This program is free software; you can redistribute it and/or modify
> >>+ * it under the terms of the GNU General Public License version 2 and
> >>+ * only version 2 as published by the Free Software Foundation.
> >>+ *
> >>+ * This program is distributed in the hope that it will be useful,
> >>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >>+ * GNU General Public License for more details.
> >>+ */
> >>+
> >>+#ifndef PHY_SUN4I_USB_H_
> >>+#define PHY_SUN4I_USB_H_
> >>+
> >>+#include "phy.h"
> >>+
> >>+/**
> >>+ * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
> >>+ * @phy: reference to a sun4i usb phy
> >>+ * @enabled: wether to enable or disable squelch detect
> >>+ */
> >>+void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled);
> >
> >breaks build if MUSB=y and SUN41_PHY=m
> 
> Ah, good one. So I assume that it is ok to fix this by doing:
> 
> --- a/drivers/usb/musb/Kconfig
> +++ b/drivers/usb/musb/Kconfig
> @@ -66,6 +66,7 @@ config USB_MUSB_SUNXI
>         tristate "Allwinner (sunxi)"
>         depends on ARCH_SUNXI
>         depends on NOP_USB_XCEIV
> + depends on PHY_SUN4I_USB

I would prefer not exporting any function from phy to musb. Perhaps
figure out with Kishon how "set_squelch" can be added to PHY fwk ?

> Also I've not heard anything back from you wrt my other musb
> sunxi preparation patches and the actual musb-sunxi patch¸ are
> those all ready for merging?

I'm a little iffy with all the function rewriting again because of a new
set of limitations with a new platform. I'll review them more carefully
maybe today or tomorrow.

cheers

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux