Hi,
On 08-05-15 18:06, Felipe Balbi wrote:
Hi,
On Sun, Mar 29, 2015 at 12:50:46PM +0200, Hans de Goede wrote:
The sunxi otg phy has a bug where it wrongly detects a high speed squelch
when reset on the root port gets de-asserted with a lo-speed device.
The workaround for this is to disable squelch detect before de-asserting
reset, and re-enabling it after the reset de-assert is done. Add a sunxi
specific phy function to allow the sunxi-musb glue to do this.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/phy/phy-sun4i-usb.c | 9 +++++++++
include/linux/phy/phy-sun4i-usb.h | 26 ++++++++++++++++++++++++++
2 files changed, 35 insertions(+)
create mode 100644 include/linux/phy/phy-sun4i-usb.h
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 221e8ab..01eb08d 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -33,6 +33,7 @@
#include <linux/of_address.h>
#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
+#include <linux/phy/phy-sun4i-usb.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
@@ -75,6 +76,7 @@
#define PHY_OTG_FUNC_EN 0x28
#define PHY_VBUS_DET_EN 0x29
#define PHY_DISCON_TH_SEL 0x2a
+#define PHY_SQUELCH_DETECT 0x3c
#define MAX_PHYS 3
@@ -322,6 +324,13 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
return 0;
}
+void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+
+ sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
+}
+
static struct phy_ops sun4i_usb_phy_ops = {
.init = sun4i_usb_phy_init,
.exit = sun4i_usb_phy_exit,
diff --git a/include/linux/phy/phy-sun4i-usb.h b/include/linux/phy/phy-sun4i-usb.h
new file mode 100644
index 0000000..50aed92
--- /dev/null
+++ b/include/linux/phy/phy-sun4i-usb.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2015 Hans de Goede <hdegoede@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PHY_SUN4I_USB_H_
+#define PHY_SUN4I_USB_H_
+
+#include "phy.h"
+
+/**
+ * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
+ * @phy: reference to a sun4i usb phy
+ * @enabled: wether to enable or disable squelch detect
+ */
+void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled);
breaks build if MUSB=y and SUN41_PHY=m
Ah, good one. So I assume that it is ok to fix this by doing:
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -66,6 +66,7 @@ config USB_MUSB_SUNXI
tristate "Allwinner (sunxi)"
depends on ARCH_SUNXI
depends on NOP_USB_XCEIV
+ depends on PHY_SUN4I_USB
select EXTCON
select GENERIC_PHY
select SUNXI_SRAM
?
Also I've not heard anything back from you wrt my other musb
sunxi preparation patches and the actual musb-sunxi patch¸ are
those all ready for merging?
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
