Felipe,
> -----Original Message-----
> From: Balbi, Felipe
> Sent: Tuesday, March 24, 2015 11:54 AM
> To: Liu, Bin
> Cc: Balbi, Felipe; linux-usb@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] usb: musb: only set test mode once
>
> On Tue, Mar 24, 2015 at 11:52:04AM -0500, Liu, Bin wrote:
> > Felipe,
> >
> > > -----Original Message-----
> > > From: Balbi, Felipe
> > > Sent: Tuesday, March 24, 2015 11:31 AM
> > > To: Liu, Bin
> > > Cc: linux-usb@xxxxxxxxxxxxxxx; Balbi, Felipe
> > > Subject: Re: [PATCH] usb: musb: only set test mode once
> > >
> > > On Fri, Mar 20, 2015 at 04:49:58PM -0500, Bin Liu wrote:
> > > > The MUSB test mode register can only be set once, otherwise the
> > > > result is undefined.
> > > >
> > > > This prevents the debugfs testmode entry to set the register more
> > > > than once which causes test failure.
> > > >
> > > > Signed-off-by: Bin Liu <b-liu@xxxxxx>
> > > > ---
> > > > drivers/usb/musb/musb_debugfs.c | 6 ++++++
> > > > 1 file changed, 6 insertions(+)
> > > >
> > > > diff --git a/drivers/usb/musb/musb_debugfs.c
> > > > b/drivers/usb/musb/musb_debugfs.c index 78a283e..cd0c381 100644
> > > > --- a/drivers/usb/musb/musb_debugfs.c
> > > > +++ b/drivers/usb/musb/musb_debugfs.c
> > > > @@ -194,6 +194,12 @@ static ssize_t musb_test_mode_write(struct file
> *file,
> > > > u8 test = 0;
> > > > char buf[18];
> > > >
> > > > + test = musb_readb(musb->mregs, MUSB_TESTMODE);
> > > > + if (test) {
> > > > + dev_err(musb->controller, "Error: test mode is running\n");
> > >
> > > with this message, user doesn't really know exactly what to do.
> > > Perhaps mention that a USB Bus Reset is needed to get the thing out of test
> mode?
> >
> > Ok, will change it. How about only print the error message when the
> > new test mode is different from the running one, and silently do
> > nothing if the new test mode is the same. Something like
> >
> > if (test) {
> > if (new test is different) {
> > dev_err(...);
> > return -EINVAL;
> > } else {
> > return 0;
> > }
> > }
>
> USB2 spec says you *must* go through a bus reset in order to get out of
> testmode. So if you want to change test_j to test_k, you must first bus reset.
Yes, this will be handled in if branch - dev_err():
dev_err(musb->controller, "Error: test mode is already running. "
"Please do USB Bus Reset to start a new test\n");
Regards,
-Bin.
>
> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
