On Tue, Mar 24, 2015 at 12:05:20PM -0500, Liu, Bin wrote:
> Felipe,
>
> > -----Original Message-----
> > From: Balbi, Felipe
> > Sent: Tuesday, March 24, 2015 11:54 AM
> > To: Liu, Bin
> > Cc: Balbi, Felipe; linux-usb@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH] usb: musb: only set test mode once
> >
> > On Tue, Mar 24, 2015 at 11:52:04AM -0500, Liu, Bin wrote:
> > > Felipe,
> > >
> > > > -----Original Message-----
> > > > From: Balbi, Felipe
> > > > Sent: Tuesday, March 24, 2015 11:31 AM
> > > > To: Liu, Bin
> > > > Cc: linux-usb@xxxxxxxxxxxxxxx; Balbi, Felipe
> > > > Subject: Re: [PATCH] usb: musb: only set test mode once
> > > >
> > > > On Fri, Mar 20, 2015 at 04:49:58PM -0500, Bin Liu wrote:
> > > > > The MUSB test mode register can only be set once, otherwise the
> > > > > result is undefined.
> > > > >
> > > > > This prevents the debugfs testmode entry to set the register more
> > > > > than once which causes test failure.
> > > > >
> > > > > Signed-off-by: Bin Liu <b-liu@xxxxxx>
> > > > > ---
> > > > > drivers/usb/musb/musb_debugfs.c | 6 ++++++
> > > > > 1 file changed, 6 insertions(+)
> > > > >
> > > > > diff --git a/drivers/usb/musb/musb_debugfs.c
> > > > > b/drivers/usb/musb/musb_debugfs.c index 78a283e..cd0c381 100644
> > > > > --- a/drivers/usb/musb/musb_debugfs.c
> > > > > +++ b/drivers/usb/musb/musb_debugfs.c
> > > > > @@ -194,6 +194,12 @@ static ssize_t musb_test_mode_write(struct file
> > *file,
> > > > > u8 test = 0;
> > > > > char buf[18];
> > > > >
> > > > > + test = musb_readb(musb->mregs, MUSB_TESTMODE);
> > > > > + if (test) {
> > > > > + dev_err(musb->controller, "Error: test mode is running\n");
> > > >
> > > > with this message, user doesn't really know exactly what to do.
> > > > Perhaps mention that a USB Bus Reset is needed to get the thing out of test
> > mode?
> > >
> > > Ok, will change it. How about only print the error message when the
> > > new test mode is different from the running one, and silently do
> > > nothing if the new test mode is the same. Something like
> > >
> > > if (test) {
> > > if (new test is different) {
> > > dev_err(...);
> > > return -EINVAL;
> > > } else {
> > > return 0;
> > > }
> > > }
> >
> > USB2 spec says you *must* go through a bus reset in order to get out of
> > testmode. So if you want to change test_j to test_k, you must first bus reset.
>
> Yes, this will be handled in if branch - dev_err():
>
> dev_err(musb->controller, "Error: test mode is already running. "
> "Please do USB Bus Reset to start a new test\n");
that's alright, but that if (new test is different) check is pointless
;-)
--
balbi
Attachment:
signature.asc
Description: Digital signature
