Hi Heikki, On Wed, Mar 18, 2015 at 02:40:30PM +0200, Heikki Krogerus wrote: > On some BYT platforms the USB2 PHY needs to be put into > operational mode by the controller driver with GPIOs > controlling the PHYs reset and cs signals. > > Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> > --- > drivers/usb/dwc3/dwc3-pci.c | 36 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c > index b773fb5..01cfdbd 100644 > --- a/drivers/usb/dwc3/dwc3-pci.c > +++ b/drivers/usb/dwc3/dwc3-pci.c > @@ -21,6 +21,8 @@ > #include <linux/slab.h> > #include <linux/pci.h> > #include <linux/platform_device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/acpi.h> > > #include "platform_data.h" > > @@ -31,6 +33,15 @@ > #define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30 > #define PCI_DEVICE_ID_INTEL_SPTH 0xa130 > > +static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; > +static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; > + > +static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = { > + { "reset-gpios", &reset_gpios, 1 }, > + { "cs-gpios", &cs_gpios, 1 }, > + { }, > +}; > + > static int dwc3_pci_quirks(struct pci_dev *pdev) > { > if (pdev->vendor == PCI_VENDOR_ID_AMD && > @@ -65,6 +76,31 @@ static int dwc3_pci_quirks(struct pci_dev *pdev) > sizeof(pdata)); > } > > + if (pdev->vendor == PCI_VENDOR_ID_INTEL && > + pdev->device == PCI_DEVICE_ID_INTEL_BYT) { > + struct gpio_desc *gpio; > + > + acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev), > + acpi_dwc3_byt_gpios); > + > + gpio = gpiod_get(&pdev->dev, "reset"); > + if (IS_ERR(gpio)) > + return 0; > + > + /* These GPIOs will turn on the USB2 PHY */ > + gpiod_direction_output(gpio, 0); > + gpiod_set_value_cansleep(gpio, 1); > + gpiod_put(gpio); > + > + gpio = gpiod_get(&pdev->dev, "cs"); CS GPIO should be handled before RESET. BR, David > + if (!IS_ERR(gpio)) { > + gpiod_direction_output(gpio, 0); > + gpiod_set_value_cansleep(gpio, 1); > + gpiod_put(gpio); > + } > + msleep(10); > + } > + > return 0; > } > > -- > 2.1.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html