Hi, Balbi
On 02/20/2015 10:41 PM, Felipe Balbi wrote:
+static void hi6220_start_peripheral(struct hi6220_priv *priv, bool on)
+{
+ struct usb_otg *otg = priv->phy.otg;
+
+ if (!otg->gadget)
+ return;
+
+ if (on)
+ usb_gadget_connect(otg->gadget);
+ else
+ usb_gadget_disconnect(otg->gadget);
why is the PHY fiddling with pullups ?
We use this to enable/disable otg gadget mode.
The gpio_id & gpio_vbus are used to distinguish otg gadget mode or host
mode.
When micro usb or otg device attached to otg, gpio_vbus falling down.
And gpio_id = 1 is micro usb, gpio_id = 0 is otg device.
So when micro usb attached, we enable gadget mode; while micro usb
detached, we disable gadget mode, and dwc2 will automatically set to
host mode.
+}
+
+static void hi6220_detect_work(struct work_struct *work)
+{
+ struct hi6220_priv *priv =
+ container_of(work, struct hi6220_priv, work.work);
+ int gpio_id, gpio_vbus;
+ enum usb_otg_state state;
+
+ if (!gpio_is_valid(priv->gpio_id) || !gpio_is_valid(priv->gpio_vbus))
+ return;
+
+ gpio_id = gpio_get_value_cansleep(priv->gpio_id);
+ gpio_vbus = gpio_get_value_cansleep(priv->gpio_vbus);
looks like this should be using extcon
Not used extcon before.
However, we need gpio_vbus interrupt.
Checked phy-tahvo.c and phy-omap-otg.c, not find extcon related with
interrupt.
Will investigate tomorrow.
+
+ if (gpio_vbus == 0) {
+ if (gpio_id == 1)
+ state = OTG_STATE_B_PERIPHERAL;
+ else
+ state = OTG_STATE_A_HOST;
+ } else {
+ state = OTG_STATE_A_HOST;
+ }
+
+ if (priv->state != state) {
+ hi6220_start_peripheral(priv, state == OTG_STATE_B_PERIPHERAL);
+ priv->state = state;
+ }
+}
+
+static irqreturn_t hiusb_gpio_intr(int irq, void *data)
+{
+ struct hi6220_priv *priv = (struct hi6220_priv *)data;
+
+ /* add debounce time */
+ schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
this is really bad. We have threaded interrupt support, right ?
Since we use two gpio to distinguish gadget mode or host mode.
Debounce time can introduce more accuracy.
I think threaded interrupt can not be used for adding debounce time.
Here add debounce is just for safety.
Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
