Hi !
I try to use a usb-serial converter and i can't set the baud rate (and
other stuff) on the ttyUSB0.
The converter can be see on this page (Version USB : 20.00 €) :
http://www.domotibox.com/solarbox/?section=Boutique
There is some data from my system (raspberry pi b+, raspbian) :
$ uname -a
Linux domo-1 3.18.7+ #755 PREEMPT Thu Feb 12 17:14:31 GMT 2015 armv6l
GNU/Linux
$ /opt/vc/bin/vcgencmd version
Feb 12 2015 17:23:49
Copyright (c) 2012 Broadcom
version 571f5d2143489e4300d7e2ed5b1a73f33f3b13e5 (clean) (release)
$ cat /etc/*-release
PRETTY_NAME="Raspbian GNU/Linux 7 (wheezy)"
NAME="Raspbian GNU/Linux"
VERSION_ID="7"
VERSION="7 (wheezy)"
ID=raspbian
ID_LIKE=debian
ANSI_COLOR="1;31"
HOME_URL="http://www.raspbian.org/";
SUPPORT_URL="http://www.raspbian.org/RaspbianForums";
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs";
$ dmesg
usb 1-1.3: new full-speed USB device number 4 using dwc_otg
usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: FT232R USB UART
usb 1-1.3: Manufacturer: FTDI
usb 1-1.3: SerialNumber: AD02DY77
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbserial_generic 1-1.3:1.0: The "generic" usb-serial driver is only for
testing and one-off prototypes.
usbserial_generic 1-1.3:1.0: Tell linux-usb@xxxxxxxxxxxxxxx to add your
device to a proper driver.
usbserial_generic 1-1.3:1.0: generic converter detected
usb 1-1.3: generic converter now attached to ttyUSB0
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
If you need other data, ask me.
(and sorry for my english.. I'm french so...)
Thanks!
Best regards.
Laurent FAIVRE
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
