From: Gregory Herrero <gregory.herrero@xxxxxxxxx>
USB reset interrupt is no more used to reset the controller.
Thus, reset the controller in pullup callback as described by
Synopsys programming guide. Otherwise enumeration sometimes
fails when usb configuration is switched without physical
disconnection.
Tested-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
Acked-by: John Youn <johnyoun@xxxxxxxxxxxx>
Signed-off-by: Gregory Herrero <gregory.herrero@xxxxxxxxx>
---
drivers/usb/dwc2/gadget.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index f201f6d..15aa578 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3162,6 +3162,7 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
if (is_on) {
clk_enable(hsotg->clk);
hsotg->enabled = 1;
+ s3c_hsotg_core_init_disconnected(hsotg, false);
s3c_hsotg_core_connect(hsotg);
} else {
s3c_hsotg_core_disconnect(hsotg);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
