Hi Vivek, On Mon, Nov 24, 2014 at 6:36 PM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote: > BUS1 pinctrl provides gpios for usb and power regulator > available on exynos7-espresso board. So add relevant device > node for pinctrl-bus1. > > Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx> > Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > --- > Looks good to me. Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> > This patch was part of series: > "[PATCH 00/11] Exynos7: Adding USB 3.0 support" > https://lkml.org/lkml/2014/11/21/247 > > Changes since V1: > - Added support for all pin banks which are part of BUS1 pin controller. > > arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 82 +++++++++++++++++++++++ > arch/arm64/boot/dts/exynos/exynos7.dtsi | 7 ++ > 2 files changed, 89 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi > index 2eef4a2..c367f0a 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi > @@ -335,6 +335,88 @@ > }; > }; > > +&pinctrl_bus1 { > + gpf0: gpf0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf1: gpf1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf2: gpf2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf3: gpf3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf4: gpf4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf5: gpf5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg1: gpg1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpg2: gpg2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph1: gph1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpv6: gpv6 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > &pinctrl_nfc { > gpj0: gpj0 { > gpio-controller; > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 1d9e4c9..e633b02 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -26,6 +26,7 @@ > pinctrl5 = &pinctrl_ese; > pinctrl6 = &pinctrl_fsys0; > pinctrl7 = &pinctrl_fsys1; > + pinctrl8 = &pinctrl_bus1; > }; > > cpus { > @@ -242,6 +243,12 @@ > interrupts = <0 383 0>; > }; > > + pinctrl_bus1: pinctrl@14870000 { > + compatible = "samsung,exynos7-pinctrl"; > + reg = <0x14870000 0x1000>; > + interrupts = <0 384 0>; > + }; > + > pinctrl_nfc: pinctrl@14cd0000 { > compatible = "samsung,exynos7-pinctrl"; > reg = <0x14cd0000 0x1000>; > -- > 1.7.10.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Regards, Alim -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
