On Wed, Nov 12, 2014 at 12:04:27AM +0000, Sid Boyce wrote: > On 11/11/14 19:46, Johan Hovold wrote: > > On Tue, Nov 11, 2014 at 04:43:52PM +0000, Sid Boyce wrote: > >> Results > >> ----------- > >> root@sdrbox:~# lsusb > >> Bus 002 Device 004: ID 13fd:1840 Initio Corporation INIC-1608 SATA bridge > >> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > >> Bus 004 Device 003: ID 15ba:000c Olimex Ltd. > >> > >> The failure due to AtMega32 not attached. > >> root@sdrbox:~# avrdude -p m32 -F -c stk500v2 -P /dev/ttyACM1 > >> > >> avrdude: stk500v2_command(): warning: Command timed out > >> avrdude: initialization failed, rc=-1 > >> avrdude: AVR device initialized and ready to accept instructions > >> avrdude: Device signature = 0xc807c6 > >> avrdude: Expected signature for ATmega32 is 1E 95 02 > >> > >> avrdude done. Thank you. > > I'm really not sure what I'm supposed to make of the above. > > > > Care to submit the patch on a format that I can apply (i.e. with proper > > subject and commit message and patch inline in body)? See > > Documentation/SubmittingPatches for details. > > > > Also why are you using an ACM node above? That's a different driver > > (cdc-acm). > > > > Could you provide "lsusb -v" output for your device as well? > > > > Thanks, > > Johan > > > root@sdrbox:~# lsusb > Bus 002 Device 004: ID 13fd:1840 Initio Corporation INIC-1608 SATA bridge > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 003: ID 15ba:000c Olimex Ltd. > Bus 004 Device 002: ID 195d:1009 Itron Technology iONE > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 004: ID 2341:0043 Arduino SA Uno R3 (CDC ACM) > Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 003 Device 002: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet > K-2024 Multimedia Keyboard > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Can you use the verbose flag "-v", that is: lsusb -vd 15ba:000c > I have done another patch, please let me know if it needs a cleanup. Lars raised very good point about the fact that you add an entry for a different PID (0x000b). When submitting patches, anything you write in the message body will end up in the commit message (and the mail Subject becomes the commit summary). If you need make any additional comments you put that below the cut off line, but before the actual diff. See http://marc.info/?l=linux-usb&m=141293474912256&w=2 for an example. Check out "git format-patch" as well. Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
