On Fri, Oct 17, 2014 at 09:48:59AM -0500, Felipe Balbi wrote:
> On Fri, Oct 17, 2014 at 04:53:32PM +0800, Huang Rui wrote:
> > When parameter DWC_USB3_LPM_ERRATA_ENABLE is enabled in Andvanced Configuration
> > of coreConsultant, it supports of xHCI BESL Errata Dated 10/19/2011 is enabled
> > in host mode. In device mode it adds the capability to send NYET response based
> > on the BESL value received in the LPM token.
> >
> > This patch add an entry that soc platform is able to define the lpm capacity
> > with their own device tree or bus glue layer.
> >
> > Suggested-by: Felipe Balbi <balbi@xxxxxx>
> > Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
> > ---
> > drivers/usb/dwc3/core.c | 2 ++
> > drivers/usb/dwc3/core.h | 24 +++++++++++++++---------
> > drivers/usb/dwc3/dwc3-pci.c | 1 +
> > drivers/usb/dwc3/gadget.c | 7 +++++++
> > drivers/usb/dwc3/platform_data.h | 1 +
> > 5 files changed, 26 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 819e501..25db533 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -708,11 +708,13 @@ static int dwc3_probe(struct platform_device *pdev)
> >
> > if (node) {
> > dwc->maximum_speed = of_usb_get_maximum_speed(node);
> > + dwc->has_lpm_erratum = of_property_read_bool(node, "snps,has-lpm-erratum");
> >
> > dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
> > dwc->dr_mode = of_usb_get_dr_mode(node);
> > } else if (pdata) {
> > dwc->maximum_speed = pdata->maximum_speed;
> > + dwc->has_lpm_erratum = pdata->has_lpm_erratum;
> >
> > dwc->needs_fifo_resize = pdata->tx_fifo_resize;
> > dwc->dr_mode = pdata->dr_mode;
> > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> > index cfe0d57..d58479e 100644
> > --- a/drivers/usb/dwc3/core.h
> > +++ b/drivers/usb/dwc3/core.h
> > @@ -246,16 +246,19 @@
> > #define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
> >
> > /* These apply for core versions 1.94a and later */
> > -#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
> > -#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
> > -#define DWC3_DCTL_CRS (1 << 17)
> > -#define DWC3_DCTL_CSS (1 << 16)
> > +#define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf)
> > +#define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20)
> > -#define DWC3_DCTL_INITU2ENA (1 << 12)
> > -#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
> > -#define DWC3_DCTL_INITU1ENA (1 << 10)
> > -#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
> > -#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
> > +#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
> > +#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
> > +#define DWC3_DCTL_CRS (1 << 17)
> > +#define DWC3_DCTL_CSS (1 << 16)
> > +
> > +#define DWC3_DCTL_INITU2ENA (1 << 12)
> > +#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
> > +#define DWC3_DCTL_INITU1ENA (1 << 10)
> > +#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
> > +#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
> >
> > #define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
> > #define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
> > @@ -665,6 +668,8 @@ struct dwc3_scratchpad_array {
> > * @ep0_bounced: true when we used bounce buffer
> > * @ep0_expect_in: true when we expect a DATA IN transfer
> > * @has_hibernation: true when dwc3 was configured with Hibernation
> > + * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
> > + * there's now way for software to detect this in runtime.
> > * @is_selfpowered: true when we are selfpowered
> > * @is_fpga: true when we are using the FPGA board
> > * @needs_fifo_resize: not all users might want fifo resizing, flag it
> > @@ -771,6 +776,7 @@ struct dwc3 {
> > unsigned ep0_bounced:1;
> > unsigned ep0_expect_in:1;
> > unsigned has_hibernation:1;
> > + unsigned has_lpm_erratum:1;
> > unsigned is_selfpowered:1;
> > unsigned is_fpga:1;
> > unsigned needs_fifo_resize:1;
> > diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
> > index a89db6c..bbe946c 100644
> > --- a/drivers/usb/dwc3/dwc3-pci.c
> > +++ b/drivers/usb/dwc3/dwc3-pci.c
> > @@ -148,6 +148,7 @@ static int dwc3_pci_probe(struct pci_dev *pci,
> >
> > if (pci->vendor == PCI_VENDOR_ID_AMD && pci->device ==
> > PCI_DEVICE_ID_AMD_NL) {
> > + dwc3_pdata.has_lpm_erratum = true;
> > dwc3_pdata.quirks |= DWC3_QUIRK_AMD_NL;
> > }
> >
>
> let's combine all AMD patches as the last patch in the series so we add
> AMD support with all quirks in one place.
>
> > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > index 1f2a719..33bfc70 100644
> > --- a/drivers/usb/dwc3/gadget.c
> > +++ b/drivers/usb/dwc3/gadget.c
> > @@ -1581,6 +1581,13 @@ static int dwc3_gadget_start(struct usb_gadget *g,
> > }
> > dwc3_writel(dwc->regs, DWC3_DCFG, reg);
> >
> > + if (dwc->has_lpm_erratum) {
> > + reg = dwc3_readl(dwc->regs, DWC3_DCTL);
> > + /* REVISIT should this be configurable ? */
> > + reg |= DWC3_DCTL_LPM_ERRATA(0xf);
>
> as Paul mentioned, this should definitely be configurable. So we need to
> discuss how to make that configurable too.
>
Can I define a 4-bits variable (lpm_nyet_thres) to let platform vendor able to configure
the besl value at DT or glue layer?
struct dwc3_platform_data {
...
unsigned has_lpm_erratum:1;
unsigned lpm_nyet_thres:4;
}
Then put the value at probe like:
dwc->has_lpm_erratum = of_property_read_u8(node, "snps,lpm-nyet-thres");
I don't find a 4-bit "Find from a property" interface, so can I use
of_property_read_u8 instead for ARM platforms?
Then do:
if (dwc->has_lpm_erratum)
reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_thres);
Thanks,
Rui
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
