Use %pad for dma_addr_t, because a dma_addr_t type can vary based on build options. So, it prevents the following build warnings in printks. drivers/usb/host/imx21-hcd.c:1175:2: warning: format '%X' expects argument of type 'unsigned int', but argument 8 has type 'dma_addr_t' [-Wformat] drivers/usb/host/imx21-hcd.c:1175:2: warning: format '%X' expects argument of type 'unsigned int', but argument 10 has type 'dma_addr_t' [-Wformat] Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx> --- drivers/usb/host/imx21-hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 207bad9..eb4efba 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1174,11 +1174,11 @@ static int imx21_hc_urb_enqueue(struct usb_hcd *hcd, dev_vdbg(imx21->dev, "enqueue urb=%p ep=%p len=%d " - "buffer=%p dma=%08X setupBuf=%p setupDma=%08X\n", + "buffer=%p dma=%pad setupBuf=%p setupDma=%pad\n", urb, ep, urb->transfer_buffer_length, - urb->transfer_buffer, urb->transfer_dma, - urb->setup_packet, urb->setup_dma); + urb->transfer_buffer, &urb->transfer_dma, + urb->setup_packet, &urb->setup_dma); if (usb_pipeisoc(urb->pipe)) return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
