From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx> There is no need to do an intermediate step for reading the MX53_USB_OTG_PHY_CTRL_1_OFFSET register. Read it directly instead. Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx> --- drivers/usb/chipidea/usbmisc_imx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index 29200eb..58591e9 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -171,8 +171,7 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) return -EINVAL; /* Select a 24 MHz reference clock for the PHY */ - reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET; - val = readl(reg); + val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK; val |= MX53_USB_PLL_DIV_24_MHZ; writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
