The bcm63xx and bcm3384 platforms need to set OHCI_QUIRK_FRAME_NO, but
they are non-PPC platforms and don't enable CONFIG_PPC_MPC52xx.
Therefore this patch changes the code that uses OHCI_QUIRK_FRAME_NO,
making it not depend on CONFIG_PPC_MPC52xx.
Also, rephrase the comments describing OHCI_QUIRK_FRAME_NO and the
related PSW endian swap.
Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx>
---
drivers/usb/host/ohci.h | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
v1->v2:
PATCH 1/3: Tweak description; no change to the code.
PATCH 2/3: No changes.
PATCH 3/3: New patch to remove ohci_platform_reset().
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 59f4245..bc46228 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -647,23 +647,22 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
/*-------------------------------------------------------------------------*/
-/* HCCA frame number is 16 bits, but is accessed as 32 bits since not all
- * hardware handles 16 bit reads. That creates a different confusion on
- * some big-endian SOC implementations. Same thing happens with PSW access.
+/*
+ * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all
+ * hardware handles 16 bit reads. Depending on the SoC implementation, the
+ * frame number can wind up in either bits [31:16] (default) or
+ * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts.
+ *
+ * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are
+ * reordered on BE.
*/
-#ifdef CONFIG_PPC_MPC52xx
-#define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
-#else
-#define big_endian_frame_no_quirk(ohci) 0
-#endif
-
static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
{
u32 tmp;
if (big_endian_desc(ohci)) {
tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
- if (!big_endian_frame_no_quirk(ohci))
+ if (!(ohci->flags & OHCI_QUIRK_FRAME_NO))
tmp >>= 16;
} else
tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
