Hi, I have an Iomega SCSI-to-USB cable, model# SCSI USBA. Iomega called it the Jaz USB Adapter; see http://www.iomega.com/europe/support/english/manuals/jazusb/home.html Picture: http://ecx.images-amazon.com/images/I/31Q4Z3PMT5L.jpg My cable has USB ID 059B:0040. It is identical in appearance to the Microtech XpressSCSI, which does work with Linux. Both are probably OEM products manufactured by Shuttle Technology/SCM Microsystems. I haven't been able to get my cable to work, though I only tested it with non-Iomega drives. Has anyone used this cable with non-Iomega drives? Either mine is faulty, or its firmware is designed to only work with Iomega drives. (I think it's most likely faulty.) I get this dmesg output on powering on the SCSI device, inserting then eventually disconnecting the USB cable: [ 5908.360421] usb 7-1: new full speed USB device number 4 using uhci_hcd [ 5910.564219] scsi8 : usb-storage 7-1:1.0 [ 5913.704183] usb 7-1: reset full speed USB device number 4 using uhci_hcd [ 5918.032207] usb 7-1: reset full speed USB device number 4 using uhci_hcd [ 5922.348444] usb 7-1: reset full speed USB device number 4 using uhci_hcd [ 5924.916423] usb 7-1: reset full speed USB device number 4 using uhci_hcd [ 5965.296235] usb 7-1: USB disconnect, device number 4 I created usbmon and Wireshark captures when doing that. If anyone feels like investigating, I have uploaded them (~5KB archive) to http://www.mediafire.com/download/uw4d4dmcq8qfbwg/Iomega_SCSI-USB_problem.tar.gz -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
