From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
Adds the gadget data structure and appropriate data structure pointers
to the common dwc2_hsotg data structure. To keep the driver data
dereference code looking clean, the gadget variable declares are only available
for peripheral and dual-role mode. This is needed so that the dwc2_hsotg data
structure can be used by the hcd and gadget drivers.
Updates gadget.c to use the dwc2_hsotg data structure and gadget pointers
that have been moved into the common dwc2_hsotg structure. Along
with the updating the gadget driver to use the common dwc2_hsotg structure,
a few other things are required in order for this patch to build properly.
Those are:
- Remove gadget module defines. Since the driver probing will be handled
by either the platform or pci code.
- Change the gadget probe function into gadget_init.
Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Paul Zimmerman <paulz@xxxxxxxxxxxx>
---
v3: Updated with paulz's suggestion to avoid double pointers.
v2: Left the function parameter name as 'hsotg' and just changed its type.
---
drivers/usb/dwc2/core.h | 176 +++++++++++++++++++++---------------
drivers/usb/dwc2/gadget.c | 226 +++++++++++++++++-----------------------------
drivers/usb/dwc2/hcd.h | 10 --
3 files changed, 184 insertions(+), 228 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index bf015ab..f55e62d 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -84,7 +84,7 @@ static const char * const s3c_hsotg_supply_names[] = {
*/
#define EP0_MPS_LIMIT 64
-struct s3c_hsotg;
+struct dwc2_hsotg;
struct s3c_hsotg_req;
/**
@@ -130,7 +130,7 @@ struct s3c_hsotg_req;
struct s3c_hsotg_ep {
struct usb_ep ep;
struct list_head queue;
- struct s3c_hsotg *parent;
+ struct dwc2_hsotg *parent;
struct s3c_hsotg_req *req;
struct dentry *debugfs;
@@ -155,67 +155,6 @@ struct s3c_hsotg_ep {
};
/**
- * struct s3c_hsotg - driver state.
- * @dev: The parent device supplied to the probe function
- * @driver: USB gadget driver
- * @phy: The otg phy transceiver structure for phy control.
- * @uphy: The otg phy transceiver structure for old USB phy control.
- * @plat: The platform specific configuration data. This can be removed once
- * all SoCs support usb transceiver.
- * @regs: The memory area mapped for accessing registers.
- * @irq: The IRQ number we are using
- * @supplies: Definition of USB power supplies
- * @phyif: PHY interface width
- * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
- * @num_of_eps: Number of available EPs (excluding EP0)
- * @debug_root: root directrory for debugfs.
- * @debug_file: main status file for debugfs.
- * @debug_fifo: FIFO status file for debugfs.
- * @ep0_reply: Request used for ep0 reply.
- * @ep0_buff: Buffer for EP0 reply data, if needed.
- * @ctrl_buff: Buffer for EP0 control requests.
- * @ctrl_req: Request for EP0 control packets.
- * @setup: NAK management for EP0 SETUP
- * @last_rst: Time of last reset
- * @eps: The endpoints being supplied to the gadget framework
- */
-struct s3c_hsotg {
- struct device *dev;
- struct usb_gadget_driver *driver;
- struct phy *phy;
- struct usb_phy *uphy;
- struct s3c_hsotg_plat *plat;
-
- spinlock_t lock;
-
- void __iomem *regs;
- int irq;
- struct clk *clk;
-
- struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
-
- u32 phyif;
- int fifo_mem;
- unsigned int dedicated_fifos:1;
- unsigned char num_of_eps;
- u32 fifo_map;
-
- struct dentry *debug_root;
- struct dentry *debug_file;
- struct dentry *debug_fifo;
-
- struct usb_request *ep0_reply;
- struct usb_request *ctrl_req;
- u8 ep0_buff[8];
- u8 ctrl_buff[8];
-
- struct usb_gadget gadget;
- unsigned int setup;
- unsigned long last_rst;
- struct s3c_hsotg_ep *eps;
-};
-
-/**
* struct s3c_hsotg_req - data transfer request
* @req: The USB gadget request
* @queue: The list of requests for the endpoint this is queued for.
@@ -229,6 +168,7 @@ struct s3c_hsotg_req {
unsigned char mapped;
};
+#if defined(CONFIG_USB_DWC2_PERIPHERAL) || defined(CONFIG_USB_DWC2_DUAL_ROLE)
#define call_gadget(_hs, _entry) \
do { \
if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
@@ -238,6 +178,9 @@ do { \
spin_lock(&_hs->lock); \
} \
} while (0)
+#else
+#define call_gadget(_hs, _entry) do {} while (0)
+#endif
struct dwc2_hsotg;
struct dwc2_host_chan;
@@ -495,11 +438,13 @@ struct dwc2_hw_params {
* struct dwc2_hsotg - Holds the state of the driver, including the non-periodic
* and periodic schedules
*
+ * These are common for both host and peripheral modes:
+ *
* @dev: The struct device pointer
* @regs: Pointer to controller regs
- * @core_params: Parameters that define how the core should be configured
* @hw_params: Parameters that were autodetected from the
* hardware registers
+ * @core_params: Parameters that define how the core should be configured
* @op_state: The operational State, during transitions (a_host=>
* a_peripheral and b_device=>b_host) this may not match
* the core, but allows the software to determine
@@ -508,6 +453,8 @@ struct dwc2_hw_params {
* - USB_DR_MODE_PERIPHERAL
* - USB_DR_MODE_HOST
* - USB_DR_MODE_OTG
+ * @lock: Spinlock that protects all the driver data structures
+ * @priv: Stores a pointer to the struct usb_hcd
* @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
* transfer are in process of being queued
* @srp_success: Stores status of SRP request in the case of a FS PHY
@@ -517,6 +464,9 @@ struct dwc2_hw_params {
* interrupt
* @wkp_timer: Timer object for handling Wakeup Detected interrupt
* @lx_state: Lx state of connected device
+ *
+ * These are for host mode:
+ *
* @flags: Flags for handling root port state changes
* @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule.
* Transfers associated with these QHs are not currently
@@ -585,11 +535,31 @@ struct dwc2_hw_params {
* @status_buf_dma: DMA address for status_buf
* @start_work: Delayed work for handling host A-cable connection
* @reset_work: Delayed work for handling a port reset
- * @lock: Spinlock that protects all the driver data structures
- * @priv: Stores a pointer to the struct usb_hcd
* @otg_port: OTG port number
* @frame_list: Frame list
* @frame_list_dma: Frame list DMA address
+ *
+ * These are for peripheral mode:
+ *
+ * @driver: USB gadget driver
+ * @phy: The otg phy transceiver structure for phy control.
+ * @uphy: The otg phy transceiver structure for old USB phy control.
+ * @plat: The platform specific configuration data. This can be removed once
+ * all SoCs support usb transceiver.
+ * @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
+ * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
+ * @num_of_eps: Number of available EPs (excluding EP0)
+ * @debug_root: Root directrory for debugfs.
+ * @debug_file: Main status file for debugfs.
+ * @debug_fifo: FIFO status file for debugfs.
+ * @ep0_reply: Request used for ep0 reply.
+ * @ep0_buff: Buffer for EP0 reply data, if needed.
+ * @ctrl_buff: Buffer for EP0 control requests.
+ * @ctrl_req: Request for EP0 control packets.
+ * @setup: NAK management for EP0 SETUP
+ * @last_rst: Time of last reset
+ * @eps: The endpoints being supplied to the gadget framework
*/
struct dwc2_hsotg {
struct device *dev;
@@ -601,6 +571,9 @@ struct dwc2_hsotg {
enum usb_otg_state op_state;
enum usb_dr_mode dr_mode;
+ spinlock_t lock;
+ void *priv;
+
unsigned int queuing_high_bandwidth:1;
unsigned int srp_success:1;
@@ -609,6 +582,14 @@ struct dwc2_hsotg {
struct timer_list wkp_timer;
enum dwc2_lx_state lx_state;
+ /* DWC OTG HW Release versions */
+#define DWC2_CORE_REV_2_71a 0x4f54271a
+#define DWC2_CORE_REV_2_90a 0x4f54290a
+#define DWC2_CORE_REV_2_92a 0x4f54292a
+#define DWC2_CORE_REV_2_94a 0x4f54294a
+#define DWC2_CORE_REV_3_00a 0x4f54300a
+
+#if defined(CONFIG_USB_DWC2_HOST) || defined(CONFIG_USB_DWC2_DUAL_ROLE)
union dwc2_hcd_internal_flags {
u32 d32;
struct {
@@ -655,19 +636,10 @@ struct dwc2_hsotg {
struct delayed_work start_work;
struct delayed_work reset_work;
- spinlock_t lock;
- void *priv;
u8 otg_port;
u32 *frame_list;
dma_addr_t frame_list_dma;
- /* DWC OTG HW Release versions */
-#define DWC2_CORE_REV_2_71a 0x4f54271a
-#define DWC2_CORE_REV_2_90a 0x4f54290a
-#define DWC2_CORE_REV_2_92a 0x4f54292a
-#define DWC2_CORE_REV_2_94a 0x4f54294a
-#define DWC2_CORE_REV_3_00a 0x4f54300a
-
#ifdef DEBUG
u32 frrem_samples;
u64 frrem_accum;
@@ -686,6 +658,39 @@ struct dwc2_hsotg {
u32 hfnum_other_samples_b;
u64 hfnum_other_frrem_accum_b;
#endif
+#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */
+
+#if defined(CONFIG_USB_DWC2_PERIPHERAL) || defined(CONFIG_USB_DWC2_DUAL_ROLE)
+ /* Gadget structures */
+ struct usb_gadget_driver *driver;
+ struct phy *phy;
+ struct usb_phy *uphy;
+ struct s3c_hsotg_plat *plat;
+
+ struct clk *clk;
+
+ struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
+
+ u32 phyif;
+ int fifo_mem;
+ unsigned int dedicated_fifos:1;
+ unsigned char num_of_eps;
+ u32 fifo_map;
+
+ struct dentry *debug_root;
+ struct dentry *debug_file;
+ struct dentry *debug_fifo;
+
+ struct usb_request *ep0_reply;
+ struct usb_request *ctrl_req;
+ u8 ep0_buff[8];
+ u8 ctrl_buff[8];
+
+ struct usb_gadget gadget;
+ unsigned int setup;
+ unsigned long last_rst;
+ struct s3c_hsotg_ep *eps;
+#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
};
/* Reasons for halting a host channel */
@@ -955,4 +960,25 @@ extern void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg);
*/
extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg);
+#if defined(CONFIG_USB_DWC2_HOST) || defined(CONFIG_USB_DWC2_DUAL_ROLE)
+/**
+ * dwc2_hcd_get_frame_number() - Returns current frame number
+ *
+ * @hsotg: The DWC2 HCD
+ */
+extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
+#else
+static inline void dwc2_set_all_params(struct dwc2_core_params *params, int value) {}
+static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
+{ return 0; }
+static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {}
+static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
+ const struct dwc2_core_params *params)
+{ return 0; }
+#endif
+
#endif /* __DWC2_CORE_H__ */
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 8c45b4c..96f868f 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -36,6 +36,7 @@
#include <linux/platform_data/s3c-hsotg.h>
#include "core.h"
+#include "hw.h"
/* conversion functions */
static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
@@ -48,9 +49,9 @@ static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
return container_of(ep, struct s3c_hsotg_ep, ep);
}
-static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget)
+static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget)
{
- return container_of(gadget, struct s3c_hsotg, gadget);
+ return container_of(gadget, struct dwc2_hsotg, gadget);
}
static inline void __orr32(void __iomem *ptr, u32 val)
@@ -64,7 +65,7 @@ static inline void __bic32(void __iomem *ptr, u32 val)
}
/* forward decleration of functions */
-static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
+static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg);
/**
* using_dma - return the DMA status of the driver.
@@ -85,7 +86,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
*
* Until this issue is sorted out, we always return 'false'.
*/
-static inline bool using_dma(struct s3c_hsotg *hsotg)
+static inline bool using_dma(struct dwc2_hsotg *hsotg)
{
return false; /* support is not complete */
}
@@ -95,7 +96,7 @@ static inline bool using_dma(struct s3c_hsotg *hsotg)
* @hsotg: The device state
* @ints: A bitmask of the interrupts to enable
*/
-static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
+static void s3c_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints)
{
u32 gsintmsk = readl(hsotg->regs + GINTMSK);
u32 new_gsintmsk;
@@ -113,7 +114,7 @@ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
* @hsotg: The device state
* @ints: A bitmask of the interrupts to enable
*/
-static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
+static void s3c_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints)
{
u32 gsintmsk = readl(hsotg->regs + GINTMSK);
u32 new_gsintmsk;
@@ -134,7 +135,7 @@ static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
* Set or clear the mask for an individual endpoint's interrupt
* request.
*/
-static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
unsigned int ep, unsigned int dir_in,
unsigned int en)
{
@@ -159,7 +160,7 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
* s3c_hsotg_init_fifo - initialise non-periodic FIFOs
* @hsotg: The device instance.
*/
-static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
{
unsigned int ep;
unsigned int addr;
@@ -283,7 +284,7 @@ static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
* This is the reverse of s3c_hsotg_map_dma(), called for the completion
* of a request to ensure the buffer is ready for access by the caller.
*/
-static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_unmap_dma(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req)
{
@@ -312,7 +313,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
*
* This routine is only needed for PIO
*/
-static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_write_fifo(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req)
{
@@ -517,7 +518,7 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
* Start the given request running by setting the endpoint registers
* appropriately, and writing any data to the FIFOs.
*/
-static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req,
bool continuing)
@@ -707,7 +708,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
* DMA memory, then we map the memory and mark our request to allow us to
* cleanup on completion.
*/
-static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_map_dma(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct usb_request *req)
{
@@ -736,7 +737,7 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
{
struct s3c_hsotg_req *hs_req = our_req(req);
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
bool first;
dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
@@ -768,7 +769,7 @@ static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
gfp_t gfp_flags)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
unsigned long flags = 0;
int ret = 0;
@@ -799,7 +800,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
struct usb_request *req)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
@@ -814,7 +815,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
* Convert the given wIndex into a pointer to an driver endpoint
* structure, or return NULL if it is not a valid endpoint.
*/
-static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
+static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg,
u32 windex)
{
struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F];
@@ -843,7 +844,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
* Create a request and queue it on the given endpoint. This is useful as
* an internal method of sending replies to certain control requests, etc.
*/
-static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_send_reply(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *ep,
void *buff,
int length)
@@ -884,7 +885,7 @@ static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
* @hsotg: The device state
* @ctrl: USB control request
*/
-static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
struct usb_ctrlrequest *ctrl)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
@@ -955,7 +956,7 @@ static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
* @hsotg: The device state
* @ctrl: USB control request
*/
-static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
struct usb_ctrlrequest *ctrl)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
@@ -1028,8 +1029,8 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
return 1;
}
-static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
-static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
+static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg);
+static void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg);
/**
* s3c_hsotg_stall_ep0 - stall ep0
@@ -1037,7 +1038,7 @@ static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
*
* Set stall for ep0 as response for setup request.
*/
-static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_stall_ep0(struct dwc2_hsotg *hsotg)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
u32 reg;
@@ -1076,7 +1077,7 @@ static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg)
* needs to work out what to do next (and whether to pass it on to the
* gadget driver).
*/
-static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_process_control(struct dwc2_hsotg *hsotg,
struct usb_ctrlrequest *ctrl)
{
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
@@ -1161,7 +1162,7 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep,
struct usb_request *req)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
if (req->status < 0) {
dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
@@ -1183,7 +1184,7 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep,
* Enqueue a request on EP0 if necessary to received any SETUP packets
* received from the host.
*/
-static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg)
{
struct usb_request *req = hsotg->ctrl_req;
struct s3c_hsotg_req *hs_req = our_req(req);
@@ -1226,7 +1227,7 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
*
* Note, expects the ep to already be locked as appropriate.
*/
-static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_complete_request(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
struct s3c_hsotg_req *hs_req,
int result)
@@ -1291,7 +1292,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
* endpoint, so sort out whether we need to read the data into a request
* that has been made for that endpoint.
*/
-static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
+static void s3c_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size)
{
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
struct s3c_hsotg_req *hs_req = hs_ep->req;
@@ -1356,7 +1357,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
* currently believed that we do not need to wait for any space in
* the TxFIFO.
*/
-static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_send_zlp(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_req *req)
{
u32 ctrl;
@@ -1398,7 +1399,7 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
* transfer for an OUT endpoint has been completed, either by a short
* packet or by the finish of a transfer.
*/
-static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_handle_outdone(struct dwc2_hsotg *hsotg,
int epnum, bool was_setup)
{
u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum));
@@ -1471,7 +1472,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
*
* Return the current frame number
*/
-static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
+static u32 s3c_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
{
u32 dsts;
@@ -1498,7 +1499,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
* as the actual data should be sent to the memory directly and we turn
* on the completion interrupts to get notifications of transfer completion.
*/
-static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_handle_rx(struct dwc2_hsotg *hsotg)
{
u32 grxstsr = readl(hsotg->regs + GRXSTSP);
u32 epnum, status, size;
@@ -1590,7 +1591,7 @@ static u32 s3c_hsotg_ep0_mps(unsigned int mps)
* Configure the maximum packet size for the given endpoint, updating
* the hardware control registers to reflect this.
*/
-static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg,
unsigned int ep, unsigned int mps)
{
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
@@ -1645,7 +1646,7 @@ bad_mps:
* @hsotg: The driver state
* @idx: The index for the endpoint (0..15)
*/
-static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
+static void s3c_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx)
{
int timeout;
int val;
@@ -1681,7 +1682,7 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
* Check to see if there is a request that has data to send, and if so
* make an attempt to write data into the FIFO.
*/
-static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
+static int s3c_hsotg_trytx(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep)
{
struct s3c_hsotg_req *hs_req = hs_ep->req;
@@ -1714,7 +1715,7 @@ static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
* An IN transfer has been completed, update the transfer's state and then
* call the relevant completion routines.
*/
-static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep)
{
struct s3c_hsotg_req *hs_req = hs_ep->req;
@@ -1791,7 +1792,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
*
* Process and clear any interrupt pending for an individual endpoint
*/
-static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
+static void s3c_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
int dir_in)
{
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
@@ -1916,7 +1917,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
* Handle updating the device settings after the enumeration phase has
* been completed.
*/
-static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg)
{
u32 dsts = readl(hsotg->regs + DSTS);
int ep0_mps = 0, ep_mps = 8;
@@ -1993,7 +1994,7 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
* Go through the requests on the given endpoint and mark them
* completed with the given result code.
*/
-static void kill_all_requests(struct s3c_hsotg *hsotg,
+static void kill_all_requests(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *ep,
int result, bool force)
{
@@ -2027,7 +2028,7 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
* transactions and signal the gadget driver that this
* has happened.
*/
-static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg)
{
unsigned ep;
@@ -2042,7 +2043,7 @@ static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg)
* @hsotg: The device state:
* @periodic: True if this is a periodic FIFO interrupt
*/
-static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
+static void s3c_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic)
{
struct s3c_hsotg_ep *ep;
int epno, ret;
@@ -2076,7 +2077,7 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
*
* Issue a soft reset to the core, and await the core finishing it.
*/
-static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
+static int s3c_hsotg_corereset(struct dwc2_hsotg *hsotg)
{
int timeout;
u32 grstctl;
@@ -2124,7 +2125,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
*
* Issue a soft reset to the core, and await the core finishing it.
*/
-static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
+void s3c_hsotg_core_init(struct dwc2_hsotg *hsotg)
{
s3c_hsotg_corereset(hsotg);
@@ -2258,7 +2259,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
*/
static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
{
- struct s3c_hsotg *hsotg = pw;
+ struct dwc2_hsotg *hsotg = pw;
int retry_count = 8;
u32 gintsts;
u32 gintmsk;
@@ -2450,7 +2451,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
unsigned long flags;
int index = hs_ep->index;
u32 epctrl_reg;
@@ -2590,7 +2591,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
static int s3c_hsotg_ep_disable(struct usb_ep *ep)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hsotg = hs_ep->parent;
+ struct dwc2_hsotg *hsotg = hs_ep->parent;
int dir_in = hs_ep->dir_in;
int index = hs_ep->index;
unsigned long flags;
@@ -2655,7 +2656,7 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
{
struct s3c_hsotg_req *hs_req = our_req(req);
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
unsigned long flags;
dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
@@ -2681,7 +2682,7 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
int index = hs_ep->index;
u32 epreg;
u32 epctl;
@@ -2745,7 +2746,7 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
- struct s3c_hsotg *hs = hs_ep->parent;
+ struct dwc2_hsotg *hs = hs_ep->parent;
unsigned long flags = 0;
int ret = 0;
@@ -2774,7 +2775,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
* A wrapper for platform code responsible for controlling
* low-level USB code
*/
-static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_phy_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -2797,7 +2798,7 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
* A wrapper for platform code responsible for controlling
* low-level USB code
*/
-static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_phy_disable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -2815,7 +2816,7 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
* s3c_hsotg_init - initalize the usb core
* @hsotg: The driver state
*/
-static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_init(struct dwc2_hsotg *hsotg)
{
/* unmask subset of endpoint interrupts */
@@ -2865,7 +2866,7 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
- struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ struct dwc2_hsotg *hsotg = to_hsotg(gadget);
int ret;
if (!hsotg) {
@@ -2921,7 +2922,7 @@ err:
static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
- struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ struct dwc2_hsotg *hsotg = to_hsotg(gadget);
unsigned long flags = 0;
int ep;
@@ -2941,7 +2942,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
spin_unlock_irqrestore(&hsotg->lock, flags);
- regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+ regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
+ hsotg->supplies);
clk_disable(hsotg->clk);
@@ -2968,7 +2970,7 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
*/
static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
{
- struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ struct dwc2_hsotg *hsotg = to_hsotg(gadget);
unsigned long flags = 0;
dev_dbg(hsotg->dev, "%s: is_on: %d\n", __func__, is_on);
@@ -3006,7 +3008,7 @@ static const struct usb_gadget_ops s3c_hsotg_gadget_ops = {
* creation) to give to the gadget driver. Setup the endpoint name, any
* direction information and other state that may be required.
*/
-static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
+static void s3c_hsotg_initep(struct dwc2_hsotg *hsotg,
struct s3c_hsotg_ep *hs_ep,
int epnum)
{
@@ -3055,7 +3057,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
*
* Read the USB core HW configuration registers
*/
-static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_hw_cfg(struct dwc2_hsotg *hsotg)
{
u32 cfg2, cfg3, cfg4;
/* check hardware configuration */
@@ -3079,7 +3081,7 @@ static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg)
* s3c_hsotg_dump - dump state of the udc
* @param: The device state
*/
-static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg)
{
#ifdef DEBUG
struct device *dev = hsotg->dev;
@@ -3138,7 +3140,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
*/
static int state_show(struct seq_file *seq, void *v)
{
- struct s3c_hsotg *hsotg = seq->private;
+ struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
int idx;
@@ -3208,7 +3210,7 @@ static const struct file_operations state_fops = {
*/
static int fifo_show(struct seq_file *seq, void *v)
{
- struct s3c_hsotg *hsotg = seq->private;
+ struct dwc2_hsotg *hsotg = seq->private;
void __iomem *regs = hsotg->regs;
u32 val;
int idx;
@@ -3264,7 +3266,7 @@ static const char *decode_direction(int is_in)
static int ep_show(struct seq_file *seq, void *v)
{
struct s3c_hsotg_ep *ep = seq->private;
- struct s3c_hsotg *hsotg = ep->parent;
+ struct dwc2_hsotg *hsotg = ep->parent;
struct s3c_hsotg_req *req;
void __iomem *regs = hsotg->regs;
int index = ep->index;
@@ -3341,7 +3343,7 @@ static const struct file_operations ep_fops = {
* with the same name as the device itself, in case we end up
* with multiple blocks in future systems.
*/
-static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
{
struct dentry *root;
unsigned epidx;
@@ -3387,7 +3389,7 @@ static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
*
* Cleanup (remove) the debugfs files for use on module exit.
*/
-static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg)
{
unsigned epidx;
@@ -3402,27 +3404,22 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
}
/**
- * s3c_hsotg_probe - probe function for hsotg driver
- * @pdev: The platform information for the driver
+ * dwc2_gadget_init - init function for gadget
+ * @dwc2: The data structure for the DWC2 driver.
+ * @irq: The IRQ number for the controller.
*/
-static int s3c_hsotg_probe(struct platform_device *pdev)
+int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
{
- struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev);
+ struct device *dev = hsotg->dev;
+ struct s3c_hsotg_plat *plat = dev->platform_data;
struct phy *phy;
struct usb_phy *uphy;
- struct device *dev = &pdev->dev;
struct s3c_hsotg_ep *eps;
- struct s3c_hsotg *hsotg;
- struct resource *res;
int epnum;
int ret;
int i;
- hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
- if (!hsotg)
- return -ENOMEM;
-
/* Set default UTMI width */
hsotg->phyif = GUSBCFG_PHYIF16;
@@ -3430,14 +3427,14 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
* Attempt to find a generic PHY, then look for an old style
* USB PHY, finally fall back to pdata
*/
- phy = devm_phy_get(&pdev->dev, "usb2-phy");
+ phy = devm_phy_get(dev, "usb2-phy");
if (IS_ERR(phy)) {
uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR(uphy)) {
/* Fallback for pdata */
- plat = dev_get_platdata(&pdev->dev);
+ plat = dev_get_platdata(dev);
if (!plat) {
- dev_err(&pdev->dev,
+ dev_err(dev,
"no platform data or transceiver defined\n");
return -EPROBE_DEFER;
}
@@ -3454,42 +3451,16 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
hsotg->phyif = GUSBCFG_PHYIF8;
}
- hsotg->dev = dev;
-
- hsotg->clk = devm_clk_get(&pdev->dev, "otg");
+ hsotg->clk = devm_clk_get(dev, "otg");
if (IS_ERR(hsotg->clk)) {
dev_err(dev, "cannot get otg clock\n");
return PTR_ERR(hsotg->clk);
}
- platform_set_drvdata(pdev, hsotg);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- hsotg->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hsotg->regs)) {
- ret = PTR_ERR(hsotg->regs);
- goto err_clk;
- }
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0) {
- dev_err(dev, "cannot find IRQ\n");
- goto err_clk;
- }
-
- spin_lock_init(&hsotg->lock);
-
- hsotg->irq = ret;
-
- dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
-
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
hsotg->gadget.name = dev_name(dev);
- /* reset the system */
-
clk_prepare_enable(hsotg->clk);
/* regulators */
@@ -3508,7 +3479,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
hsotg->supplies);
if (ret) {
- dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret);
+ dev_err(dev, "failed to enable supplies: %d\n", ret);
goto err_supplies;
}
@@ -3519,7 +3490,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
s3c_hsotg_hw_cfg(hsotg);
s3c_hsotg_init(hsotg);
- ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
+ ret = devm_request_irq(dev, irq, s3c_hsotg_irq, 0,
dev_name(dev), hsotg);
if (ret < 0) {
s3c_hsotg_phy_disable(hsotg);
@@ -3571,13 +3542,13 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret) {
- dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret);
+ dev_err(dev, "failed to disable supplies: %d\n", ret);
goto err_ep_mem;
}
s3c_hsotg_phy_disable(hsotg);
- ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
+ ret = usb_add_gadget_udc(dev, &hsotg->gadget);
if (ret)
goto err_ep_mem;
@@ -3601,10 +3572,8 @@ err_clk:
* s3c_hsotg_remove - remove function for hsotg driver
* @pdev: The platform information for the driver
*/
-static int s3c_hsotg_remove(struct platform_device *pdev)
+static int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
{
- struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
-
usb_del_gadget_udc(&hsotg->gadget);
s3c_hsotg_delete_debug(hsotg);
@@ -3619,9 +3588,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
return 0;
}
-static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state)
+static int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg)
{
- struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
unsigned long flags;
int ret = 0;
@@ -3648,9 +3616,8 @@ static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state)
return ret;
}
-static int s3c_hsotg_resume(struct platform_device *pdev)
+static int s3c_hsotg_resume(struct dwc2_hsotg *hsotg)
{
- struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
unsigned long flags;
int ret = 0;
@@ -3660,7 +3627,7 @@ static int s3c_hsotg_resume(struct platform_device *pdev)
clk_enable(hsotg->clk);
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
- hsotg->supplies);
+ hsotg->supplies);
}
spin_lock_irqsave(&hsotg->lock, flags);
@@ -3671,30 +3638,3 @@ static int s3c_hsotg_resume(struct platform_device *pdev)
return ret;
}
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c_hsotg_of_ids[] = {
- { .compatible = "snps,dwc2", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, s3c_hsotg_of_ids);
-#endif
-
-static struct platform_driver s3c_hsotg_driver = {
- .driver = {
- .name = "s3c-hsotg",
- .owner = THIS_MODULE,
- .of_match_table = of_match_ptr(s3c_hsotg_of_ids),
- },
- .probe = s3c_hsotg_probe,
- .remove = s3c_hsotg_remove,
- .suspend = s3c_hsotg_suspend,
- .resume = s3c_hsotg_resume,
-};
-
-module_platform_driver(s3c_hsotg_driver);
-
-MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
-MODULE_AUTHOR("Ben Dooks <ben@xxxxxxxxxxxx>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c-hsotg");
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index fdc6d48..08db5c0 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -666,9 +666,6 @@ extern irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg);
*/
extern void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
-extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
-extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
-
/**
* dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
* and 0 otherwise
@@ -678,13 +675,6 @@ extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
extern int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
/**
- * dwc2_hcd_get_frame_number() - Returns current frame number
- *
- * @hsotg: The DWC2 HCD
- */
-extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
-
-/**
* dwc2_hcd_dump_state() - Dumps hsotg state
*
* @hsotg: The DWC2 HCD
--
2.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
