According to On-The-Go and Embedded Host Supplement to the USB Revision
2.0 Specification, the targeted hosts (non-PC hosts) include both
embedded hosts and otg, and each targeted host product defines the
set of supported peripherals on a TPL (Targeted Peripheral List). So,
TPL should apply for both OTG and embedded host, and the otg support is
not a must for embedded host.
The TPL support feature will only be effect when CONFIG_USB_OTG_WHITELIST
has been chosen and hcd->tpl_support flag is set, it can avoid the enumeration
fails problem for the user who chooses CONFIG_USB_OTG_WHITELIST wrongly.
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
drivers/usb/core/hub.c | 33 +++++++++++++++------------------
drivers/usb/core/otg_whitelist.h | 13 +++----------
2 files changed, 18 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8a4dcbc..1fcad4d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -32,6 +32,7 @@
#include <asm/byteorder.h>
#include "hub.h"
+#include "otg_whitelist.h"
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
@@ -2199,9 +2200,6 @@ static void announce_device(struct usb_device *udev)
static inline void announce_device(struct usb_device *udev) { }
#endif
-#ifdef CONFIG_USB_OTG
-#include "otg_whitelist.h"
-#endif
/**
* usb_enumerate_device_otg - FIXME (usbcore-internal)
@@ -2261,21 +2259,6 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
}
}
}
-
- if (!is_targeted(udev)) {
-
- /* Maybe it can talk to us, though we can't talk to it.
- * (Includes HNP test device.)
- */
- if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- err = usb_port_suspend(udev, PMSG_SUSPEND);
- if (err < 0)
- dev_dbg(&udev->dev, "HNP fail, %d\n", err);
- }
- err = -ENOTSUPP;
- goto fail;
- }
-fail:
#endif
return err;
}
@@ -2298,6 +2281,7 @@ fail:
static int usb_enumerate_device(struct usb_device *udev)
{
int err;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
if (udev->config == NULL) {
err = usb_get_configuration(udev);
@@ -2319,6 +2303,19 @@ static int usb_enumerate_device(struct usb_device *udev)
if (err < 0)
return err;
+ if (IS_ENABLED(CONFIG_USB_OTG_WHITELIST) && hcd->tpl_support &&
+ !is_targeted(udev) && IS_ENABLED(CONFIG_USB_OTG)) {
+ /* Maybe it can talk to us, though we can't talk to it.
+ * (Includes HNP test device.)
+ */
+ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
+ err = usb_port_suspend(udev, PMSG_AUTO_SUSPEND);
+ if (err < 0)
+ dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+ }
+ return -ENOTSUPP;
+ }
+
usb_detect_interface_quirks(udev);
return 0;
diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
index e8cdce5..de0c9c9 100644
--- a/drivers/usb/core/otg_whitelist.h
+++ b/drivers/usb/core/otg_whitelist.h
@@ -10,8 +10,8 @@
*/
/*
- * This OTG Whitelist is the OTG "Targeted Peripheral List". It should
- * mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
+ * This OTG and Embedded Host Whitelist is "Targeted Peripheral List".
+ * It should mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
*
* YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
*/
@@ -50,10 +50,6 @@ static int is_targeted(struct usb_device *dev)
{
struct usb_device_id *id = whitelist_table;
- /* possible in developer configs only! */
- if (!dev->bus->otg_port)
- return 1;
-
/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
@@ -103,10 +99,7 @@ static int is_targeted(struct usb_device *dev)
dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
-#ifdef CONFIG_USB_OTG_WHITELIST
+
return 0;
-#else
- return 1;
-#endif
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
