Assign ports previously owned by the EHCI controllers to the xHCI
controller. There are two external USB ports (UTMI ports 0/2 and
USB3 ports 0/1) and an internal USB port (UTMI port 1). PCIe lanes
0 and 1 are used by the USB3 ports.
Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
Changes from v1:
- Updated USB power supplies.
---
arch/arm/boot/dts/tegra124-venice2.dts | 79 ++++++++++++++++++++++------------
1 file changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 70ad91d..3f706ff 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -736,7 +736,7 @@
regulator-always-on;
};
- ldo0 {
+ avdd_1v05_run: ldo0 {
regulator-name = "+1.05V_RUN_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
@@ -878,6 +878,56 @@
status = "okay";
};
+ usb@0,70090000 {
+ status = "okay";
+ phys = <&padctl TEGRA_XUSB_PADCTL_UTMI_P0>, /* 1st USB A */
+ <&padctl TEGRA_XUSB_PADCTL_UTMI_P1>, /* Internal USB */
+ <&padctl TEGRA_XUSB_PADCTL_UTMI_P2>, /* 2nd USB A */
+ <&padctl TEGRA_XUSB_PADCTL_USB3_P0>, /* 1st USB A */
+ <&padctl TEGRA_XUSB_PADCTL_USB3_P1>; /* 2nd USB A */
+ phy-names = "utmi-0", "utmi-1", "utmi-2", "usb3-0", "usb3-1";
+ avddio-pex-supply = <&vdd_1v05_run>;
+ dvddio-pex-supply = <&vdd_1v05_run>;
+ avdd-usb-supply = <&vdd_3v3_lp0>;
+ avdd-pll-utmip-supply = <&vddio_1v8>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+ avdd-pex-pll-supply = <&vdd_1v05_run>;
+ hvdd-pex-supply = <&vdd_3v3_lp0>;
+ hvdd-pex-plle-supply = <&vdd_3v3_lp0>;
+ };
+
+ padctl@0,7009f000 {
+ pinctrl-0 = <&padctl_default>;
+ pinctrl-names = "default";
+
+ vbus-otg-0-supply = <&vdd_usb1_vbus>;
+ vbus-otg-1-supply = <&vdd_run_cam>;
+ vbus-otg-2-supply = <&vdd_usb3_vbus>;
+ nvidia,usb3-port-0-lane = <TEGRA_XUSB_PADCTL_PIN_PCIE_0>;
+ nvidia,usb3-port-1-lane = <TEGRA_XUSB_PADCTL_PIN_PCIE_1>;
+
+ padctl_default: pinmux {
+ otg {
+ nvidia,lanes = "otg-0", "otg-1", "otg-2";
+ nvidia,function = "xusb";
+ };
+
+ usb3p0 {
+ nvidia,lanes = "pcie-0";
+ nvidia,function = "usb3";
+ nvidia,iddq = <0>;
+ nvidia,usb2-port-num = <0>;
+ };
+
+ usb3p1 {
+ nvidia,lanes = "pcie-1";
+ nvidia,function = "usb3";
+ nvidia,iddq = <0>;
+ nvidia,usb2-port-num = <2>;
+ };
+ };
+ };
+
sdhci@0,700b0400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -898,33 +948,6 @@
};
};
- usb@0,7d000000 {
- status = "okay";
- };
-
- usb-phy@0,7d000000 {
- status = "okay";
- vbus-supply = <&vdd_usb1_vbus>;
- };
-
- usb@0,7d004000 {
- status = "okay";
- };
-
- usb-phy@0,7d004000 {
- status = "okay";
- vbus-supply = <&vdd_run_cam>;
- };
-
- usb@0,7d008000 {
- status = "okay";
- };
-
- usb-phy@0,7d008000 {
- status = "okay";
- vbus-supply = <&vdd_usb3_vbus>;
- };
-
backlight: backlight {
compatible = "pwm-backlight";
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
