Re: [PATCH RFC 7/7] usb: host: ohci-exynos: Remove unnecessary usb-phy support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday, August 14, 2014 11:24 PM, Vivek Gautam wrote:
> 
> Now that we have completely moved from older USB-PHY drivers
> to newer GENERIC-PHY drivers for PHYs available with USB controllers
> on Exynos series of SoCs, we can remove the support for the same
> in our host drivers too.
> This should fix the issue on ohci-exynos, wherein in the absence of
> SAMSUNG_USB2PHY config symbol, we ended up getting the NOP_USB_XCEIV phy
> when the same is enabled. And thus the PHYs are not configured properly.
> 
> Reported-by: Sachin Kamat <sachin.kamat@xxxxxxxxxxx>
> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>

Reviewed-by: Jingoo Han <jg1.han@xxxxxxxxxxx>

Best regards,
Jingoo Han

> ---
>  drivers/usb/host/ohci-exynos.c |   64 ++++++----------------------------------
>  1 file changed, 9 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
> index a72ab8f..0199a8b 100644
> --- a/drivers/usb/host/ohci-exynos.c
> +++ b/drivers/usb/host/ohci-exynos.c
> @@ -19,11 +19,8 @@
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/phy.h>
> -#include <linux/usb/phy.h>
> -#include <linux/usb/samsung_usb_phy.h>
>  #include <linux/usb.h>
>  #include <linux/usb/hcd.h>
> -#include <linux/usb/otg.h>
> 
>  #include "ohci.h"
> 
> @@ -38,9 +35,7 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver;
> 
>  struct exynos_ohci_hcd {
>  	struct clk *clk;
> -	struct usb_phy *phy;
> -	struct usb_otg *otg;
> -	struct phy *phy_g[PHY_NUMBER];
> +	struct phy *phy[PHY_NUMBER];
>  };
> 
>  static int exynos_ohci_get_phy(struct device *dev,
> @@ -51,28 +46,7 @@ static int exynos_ohci_get_phy(struct device *dev,
>  	int phy_number;
>  	int ret = 0;
> 
> -	exynos_ohci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> -	if (IS_ERR(exynos_ohci->phy)) {
> -		ret = PTR_ERR(exynos_ohci->phy);
> -		if (ret != -ENXIO && ret != -ENODEV) {
> -			dev_err(dev, "no usb2 phy configured\n");
> -			return ret;
> -		}
> -		dev_dbg(dev, "Failed to get usb2 phy\n");
> -	} else {
> -		exynos_ohci->otg = exynos_ohci->phy->otg;
> -	}
> -
> -	/*
> -	 * Getting generic phy:
> -	 * We are keeping both types of phys as a part of transiting OHCI
> -	 * to generic phy framework, so as to maintain backward compatibilty
> -	 * with old DTB.
> -	 * If there are existing devices using DTB files built from them,
> -	 * to remove the support for old bindings in this driver,
> -	 * we need to make sure that such devices have their DTBs
> -	 * updated to ones built from new DTS.
> -	 */
> +	/* Get the generic phys */
>  	for_each_available_child_of_node(dev->of_node, child) {
>  		ret = of_property_read_u32(child, "reg", &phy_number);
>  		if (ret) {
> @@ -97,7 +71,7 @@ static int exynos_ohci_get_phy(struct device *dev,
>  			}
>  			dev_dbg(dev, "Failed to get usb2 phy\n");
>  		}
> -		exynos_ohci->phy_g[phy_number] = phy;
> +		exynos_ohci->phy[phy_number] = phy;
>  	}
> 
>  	return ret;
> @@ -110,16 +84,13 @@ static int exynos_ohci_phy_enable(struct device *dev)
>  	int i;
>  	int ret = 0;
> 
> -	if (!IS_ERR(exynos_ohci->phy))
> -		return usb_phy_init(exynos_ohci->phy);
> -
>  	for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
> -		if (!IS_ERR(exynos_ohci->phy_g[i]))
> -			ret = phy_power_on(exynos_ohci->phy_g[i]);
> +		if (!IS_ERR(exynos_ohci->phy[i]))
> +			ret = phy_power_on(exynos_ohci->phy[i]);
>  	if (ret)
>  		for (i--; i >= 0; i--)
> -			if (!IS_ERR(exynos_ohci->phy_g[i]))
> -				phy_power_off(exynos_ohci->phy_g[i]);
> +			if (!IS_ERR(exynos_ohci->phy[i]))
> +				phy_power_off(exynos_ohci->phy[i]);
> 
>  	return ret;
>  }
> @@ -130,14 +101,9 @@ static void exynos_ohci_phy_disable(struct device *dev)
>  	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
>  	int i;
> 
> -	if (!IS_ERR(exynos_ohci->phy)) {
> -		usb_phy_shutdown(exynos_ohci->phy);
> -		return;
> -	}
> -
>  	for (i = 0; i < PHY_NUMBER; i++)
> -		if (!IS_ERR(exynos_ohci->phy_g[i]))
> -			phy_power_off(exynos_ohci->phy_g[i]);
> +		if (!IS_ERR(exynos_ohci->phy[i]))
> +			phy_power_off(exynos_ohci->phy[i]);
>  }
> 
>  static int exynos_ohci_probe(struct platform_device *pdev)
> @@ -209,9 +175,6 @@ skip_phy:
>  		goto fail_io;
>  	}
> 
> -	if (exynos_ohci->otg)
> -		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
> -
>  	platform_set_drvdata(pdev, hcd);
> 
>  	err = exynos_ohci_phy_enable(&pdev->dev);
> @@ -244,9 +207,6 @@ static int exynos_ohci_remove(struct platform_device *pdev)
> 
>  	usb_remove_hcd(hcd);
> 
> -	if (exynos_ohci->otg)
> -		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
> -
>  	exynos_ohci_phy_disable(&pdev->dev);
> 
>  	clk_disable_unprepare(exynos_ohci->clk);
> @@ -275,9 +235,6 @@ static int exynos_ohci_suspend(struct device *dev)
>  	if (rc)
>  		return rc;
> 
> -	if (exynos_ohci->otg)
> -		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
> -
>  	exynos_ohci_phy_disable(dev);
> 
>  	clk_disable_unprepare(exynos_ohci->clk);
> @@ -293,9 +250,6 @@ static int exynos_ohci_resume(struct device *dev)
> 
>  	clk_prepare_enable(exynos_ohci->clk);
> 
> -	if (exynos_ohci->otg)
> -		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
> -
>  	ret = exynos_ohci_phy_enable(dev);
>  	if (ret) {
>  		dev_err(dev, "Failed to enable USB phy\n");
> --
> 1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux