Re: Fwd: Status of chipidea msm USB reset patch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Aug 14, 2014 at 09:53:10AM -0700, Tim Bird wrote:
> Ping.  Anybody know the status of this patch?  Is it queued in someone's tree?
> Without it the USB driver for the Qualcomm 8974 (hsusb phy) doesn't
> work (at least for me).
> It looks like it got dropped from Ivan's original patch series, back in May.

I don't maintain chipidea, Peter's the guy you want

> 
> ---------- Forwarded message ----------
> From: Tim Bird <tbird20d@xxxxxxxxx>
> Date: Fri, Jul 25, 2014 at 2:38 PM
> Subject: Status of chipidea msm USB reset patch
> To: linux-arm-msm@xxxxxxxxxxxxxxx, balbi@xxxxxx, "Ivan T. Ivanov"
> <iivanov@xxxxxxxxxx>
> 
> 
> Ivan and Felipe,
> 
> Do you know the status of the patch below?  It was part of Ivan's
> USB patch set, which got mainlined recently.  However, this patch
> did not show up in Linus' tree.
> 
> Is it in another tree on it's way, or does it need a re-submission?
> 
> I was recently testing the MSM USB gadget driver on the Dragonboard 800
> (with a Qualcomm 8974 processor), and without this patch the USB hardware
> does not come up properly.
> 
> Thanks,
>  -- Tim
> 
> 
> Subject: [PATCH] usb: chipidea: msm: Use USB PHY API to control PHY state
> 
> PHY drivers keep track of the current state of the hardware,
> so don't change PHY settings under it.
> 
> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> ---
>  drivers/usb/chipidea/ci_hdrc_msm.c | 9 ++-------
>  1 file changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c
> b/drivers/usb/chipidea/ci_hdrc_msm.c
> index d72b9d2..81de834 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -20,13 +20,11 @@
>  static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
>  {
>   struct device *dev = ci->gadget.dev.parent;
> - int val;
> 
>   switch (event) {
>   case CI_HDRC_CONTROLLER_RESET_EVENT:
>   dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
> - writel(0, USB_AHBBURST);
> - writel(0, USB_AHBMODE);
> + usb_phy_init(ci->transceiver);
>   break;
>   case CI_HDRC_CONTROLLER_STOPPED_EVENT:
>   dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
> @@ -34,10 +32,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc
> *ci, unsigned event)
>   * Put the transceiver in non-driving mode. Otherwise host
>   * may not detect soft-disconnection.
>   */
> - val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
> - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
> - val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
> - usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
> + usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
>   break;
>   default:
>   dev_dbg(dev, "unknown ci_hdrc event\n");
> --
> 1.8.2.2

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux