On 05/29/2014 12:32 AM, grantksupport@xxxxxxxxxxxxx wrote: >> The patch that probably causes your xhci issue was added to 3.13, If you >> are able >> to test a 3.12 kernel and it works then I'm quite sure it's the same >> issue as >> Saran Neti had with commit 20e7acb13ff48 > > looks like this is what you're referring to > > http://www.spinics.net/lists/linux-usb/msg108521.html > > I don't have a pkg source of vanilla v3.12x kernel, but do of > 3.11.10-11-vanilla. Booting to 3.11-vanilla with the USB3 card > installed, there's no error -- boot completes (there are _other_, > unrelated issues which make this version unusable for use here in > production ... ) > > > lspci -v > ... > 02:00.0 USB controller: VIA Technologies, Inc. Device > 3483 (rev 01) (prog-if 30 [XHCI]) Yep, also VIA controller, and works for you on 3.11 (this part at least) So I think this verifies the assumption. Cause is that SLOT ID filed of a command completion event for a reset device command always returns "0" on VIA controllers. I'll (or Saran) create a fix. we're very late in the 3.15 rc cycle so I think the fix won't get in until kernel version 3.16 Thanks for testing this -Mathias -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
