Hi Mathias, On Tue, May 06, 2014 at 11:54:15AM +0800, Pratyush ANAND wrote: > These patches provide support of LPM capability to the dwc3 xhci hosts. > Patches have been tested on STih407. > > Changes since V2: > -- checkpatch warning removed. > -- xhci pdata initialized with zero using memset. > > Changes since V1: > -- patches have been rebased on next branch of balbi/usb.git. > -- Minor comment of Mathias for V1 have been incorporated. > -- New rebased patches have been tested with hardware. > > Changes since RFC: > -- All dwc3 platform are enabled for USB3 lpm. > -- Ux timeout calculation and tier policy check as per Mathias's comment > -- A new patch added for allowing lpm (en/dis)able only if device is > atleast in default state > > > Pratyush Anand (5): > xhci: A default implementation for Ux timeout calculation and tier > policy check > xhci: Platform: Add (en/dis)able_usb3_lpm_timeout > xhci: Platform: Set xhci lpm support quirk based on platform data > dwc3: host: Enable USB3 LPM capability > usb: allow lpm (en/dis)able only if device is atleast in default state When do you plan to take these patches? Regards Pratyush > > Documentation/devicetree/bindings/usb/usb-xhci.txt | 2 + > drivers/usb/core/hub.c | 6 +- > drivers/usb/dwc3/host.c | 12 ++++ > drivers/usb/host/xhci-plat.c | 9 +++ > drivers/usb/host/xhci.c | 66 ++++++++++++++++------ > include/linux/usb/xhci_pdriver.h | 27 +++++++++ > 6 files changed, 102 insertions(+), 20 deletions(-) > create mode 100644 include/linux/usb/xhci_pdriver.h > > -- > 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
