Use the dev_dbg dynamic infrastructure instead of rolling our own custom
debug logic. This is needed as CONFIG_USB_DEBUG is now gone.
Cc: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
Cc: Sean Young <sean@xxxxxxxx>
Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Cc: Jonathan McCrohan <jmccrohan@xxxxxxxxx>
Cc: James Hogan <james.hogan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/rc/redrat3.c | 63 ++++++++++++++++------------------------------
1 file changed, 21 insertions(+), 42 deletions(-)
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 610c15ef4ae6..79abbc8d9600 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -60,22 +60,6 @@
#define DRIVER_DESC "RedRat3 USB IR Transceiver Driver"
#define DRIVER_NAME "redrat3"
-/* module parameters */
-#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
-#else
-static int debug;
-#endif
-
-#define RR3_DEBUG_STANDARD 0x1
-#define RR3_DEBUG_FUNCTION_TRACE 0x2
-
-#define rr3_dbg(dev, fmt, ...) \
- do { \
- if (debug & RR3_DEBUG_STANDARD) \
- dev_info(dev, fmt, ## __VA_ARGS__); \
- } while (0)
-
/* bulk data transfer types */
#define RR3_ERROR 0x01
#define RR3_MOD_SIGNAL_IN 0x20
@@ -233,9 +217,9 @@ static void redrat3_issue_async(struct redrat3_dev *rr3)
res = usb_submit_urb(rr3->read_urb, GFP_ATOMIC);
if (res)
- rr3_dbg(rr3->dev, "%s: receive request FAILED! "
- "(res %d, len %d)\n", __func__, res,
- rr3->read_urb->transfer_buffer_length);
+ dev_dbg(rr3->dev,
+ "%s: receive request FAILED! (res %d, len %d)\n",
+ __func__, res, rr3->read_urb->transfer_buffer_length);
}
static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code)
@@ -351,7 +335,7 @@ static void redrat3_rx_timeout(unsigned long data)
{
struct redrat3_dev *rr3 = (struct redrat3_dev *)data;
- rr3_dbg(rr3->dev, "calling ir_raw_event_reset\n");
+ dev_dbg(rr3->dev, "calling ir_raw_event_reset\n");
ir_raw_event_reset(rr3->rc);
}
@@ -376,7 +360,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
mod_timer(&rr3->rx_timeout, jiffies + delay);
mod_freq = redrat3_val_to_mod_freq(&rr3->irdata);
- rr3_dbg(dev, "Got mod_freq of %u\n", mod_freq);
+ dev_dbg(dev, "Got mod_freq of %u\n", mod_freq);
/* process each rr3 encoded byte into an int */
sig_size = be16_to_cpu(rr3->irdata.sig_size);
@@ -398,7 +382,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
/* cap the value to IR_MAX_DURATION */
rawir.duration &= IR_MAX_DURATION;
- rr3_dbg(dev, "storing %s with duration %d (i: %d)\n",
+ dev_dbg(dev, "storing %s with duration %d (i: %d)\n",
rawir.pulse ? "pulse" : "space", rawir.duration, i);
ir_raw_event_store_with_filter(rr3->rc, &rawir);
}
@@ -411,12 +395,12 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
rawir.duration = US_TO_NS(2800);
else
rawir.duration = trailer;
- rr3_dbg(dev, "storing trailing space with duration %d\n",
+ dev_dbg(dev, "storing trailing space with duration %d\n",
rawir.duration);
ir_raw_event_store_with_filter(rr3->rc, &rawir);
}
- rr3_dbg(dev, "calling ir_raw_event_handle\n");
+ dev_dbg(dev, "calling ir_raw_event_handle\n");
ir_raw_event_handle(rr3->rc);
}
@@ -506,7 +490,7 @@ static u32 redrat3_get_timeout(struct redrat3_dev *rr3)
else {
timeout = redrat3_len_to_us(be32_to_cpup(tmp));
- rr3_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000);
+ dev_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000);
}
kfree(tmp);
@@ -535,19 +519,19 @@ static void redrat3_reset(struct redrat3_dev *rr3)
rc = usb_control_msg(udev, rxpipe, RR3_RESET,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25);
- rr3_dbg(dev, "reset returned 0x%02x\n", rc);
+ dev_dbg(dev, "reset returned 0x%02x\n", rc);
*val = 5;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25);
- rr3_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
+ dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
*val = RR3_DRIVER_MAXLENS;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25);
- rr3_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
+ dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
kfree(val);
}
@@ -602,12 +586,12 @@ static void redrat3_read_packet_start(struct redrat3_dev *rr3, unsigned len)
case RR3_MOD_SIGNAL_IN:
memcpy(&rr3->irdata, rr3->bulk_in_buf, len);
rr3->bytes_read = len;
- rr3_dbg(rr3->dev, "bytes_read %d, pktlen %d\n",
+ dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n",
rr3->bytes_read, pktlen);
break;
default:
- rr3_dbg(rr3->dev, "ignoring packet with type 0x%02x, len of %d, 0x%02x\n",
+ dev_dbg(rr3->dev, "ignoring packet with type 0x%02x, len of %d, 0x%02x\n",
pkttype, len, pktlen);
break;
}
@@ -626,7 +610,7 @@ static void redrat3_read_packet_continue(struct redrat3_dev *rr3, unsigned len)
memcpy(irdata + rr3->bytes_read, rr3->bulk_in_buf, len);
rr3->bytes_read += len;
- rr3_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", rr3->bytes_read,
+ dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", rr3->bytes_read,
be16_to_cpu(rr3->irdata.header.length));
}
@@ -657,7 +641,7 @@ static int redrat3_get_ir_data(struct redrat3_dev *rr3, unsigned len)
if (pkttype == RR3_MOD_SIGNAL_IN)
redrat3_process_ir_data(rr3);
else
- rr3_dbg(dev, "discarding non-signal data packet (type 0x%02x)\n",
+ dev_dbg(dev, "discarding non-signal data packet (type 0x%02x)\n",
pkttype);
out:
@@ -717,7 +701,7 @@ static int redrat3_set_tx_carrier(struct rc_dev *rcdev, u32 carrier)
struct redrat3_dev *rr3 = rcdev->priv;
struct device *dev = rr3->dev;
- rr3_dbg(dev, "Setting modulation frequency to %u", carrier);
+ dev_dbg(dev, "Setting modulation frequency to %u", carrier);
if (carrier == 0)
return -EINVAL;
@@ -773,7 +757,7 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf,
break;
}
if (lencheck == curlencheck) {
- rr3_dbg(dev, "txbuf[%d]=%u, pos %d, enc %u\n",
+ dev_dbg(dev, "txbuf[%d]=%u, pos %d, enc %u\n",
i, txbuf[i], curlencheck, cur_sample_len);
if (curlencheck < RR3_DRIVER_MAXLENS) {
/* now convert the value to a proper
@@ -807,7 +791,7 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf,
pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress);
ret = usb_bulk_msg(rr3->udev, pipe, irdata,
sendbuf_len, &ret_len, 10 * HZ);
- rr3_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
+ dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
/* now tell the hardware to transmit what we sent it */
pipe = usb_rcvctrlpipe(rr3->udev, 0);
@@ -941,7 +925,7 @@ static int redrat3_dev_probe(struct usb_interface *intf,
((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
((attrs & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_BULK)) {
- rr3_dbg(dev, "found bulk-in endpoint at 0x%02x\n",
+ dev_dbg(dev, "found bulk-in endpoint at 0x%02x\n",
ep->bEndpointAddress);
/* data comes in on 0x82, 0x81 is for other data... */
if (ep->bEndpointAddress == RR3_BULK_IN_EP_ADDR)
@@ -952,7 +936,7 @@ static int redrat3_dev_probe(struct usb_interface *intf,
((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
((attrs & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_BULK)) {
- rr3_dbg(dev, "found bulk-out endpoint at 0x%02x\n",
+ dev_dbg(dev, "found bulk-out endpoint at 0x%02x\n",
ep->bEndpointAddress);
ep_out = ep;
}
@@ -1109,8 +1093,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_AUTHOR(DRIVER_AUTHOR2);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(usb, redrat3_dev_table);
-
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable module debug spew. 0 = no debugging (default) "
- "0x1 = standard debug messages, 0x2 = function tracing debug. "
- "Flag bits are addative (i.e., 0x3 for both debug types).");
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
