Now that acm_set_control() handles runtime PM properly, the only remaining reason for the PM operations in shutdown is to clear the needs_remote_wakeup flag before the final put. Note that this also means that we now need to grab the write_lock to prevent racing with resume. Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx> --- drivers/usb/class/cdc-acm.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 91fdc293196f..f038f390db97 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -590,13 +590,22 @@ static void acm_port_shutdown(struct tty_port *port) struct urb *urb; struct acm_wb *wb; int i; - int pm_err; dev_dbg(&acm->control->dev, "%s\n", __func__); - pm_err = usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); + /* + * Need to grab write_lock to prevent race with resume, but no need to + * hold it due to the tty-port initialised flag. + */ + spin_lock_irq(&acm->write_lock); + spin_unlock_irq(&acm->write_lock); + + usb_autopm_get_interface_no_resume(acm->control); + acm->control->needs_remote_wakeup = 0; + usb_autopm_put_interface(acm->control); + for (;;) { urb = usb_get_from_anchor(&acm->delayed); if (!urb) @@ -611,10 +620,6 @@ static void acm_port_shutdown(struct tty_port *port) usb_kill_urb(acm->wb[i].urb); for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->read_urbs[i]); - - acm->control->needs_remote_wakeup = 0; - if (!pm_err) - usb_autopm_put_interface(acm->control); } static void acm_tty_cleanup(struct tty_struct *tty) -- 1.8.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html