On 5/25/2014 2:06 PM, Daniel Mack wrote:
The musb/cppi41 glue layer is capable of handling transactions that span
over more than one USB packet by reloading the DMA descriptors
partially. An urb is considered completed when either its transfer
buffer has been filled entirely (actual_length ==
transfer_buffer_length) or if a packet in the stream has less bytes than
the endpoint's wMaxPacketSize.
Once one of the above conditions is met, musb_dma_completion() is called
from cppi41_trans_done(). However, the final decision whether or not to
return the urb to its owner is made by the core and its determination of
the variable 'done' in musb_host_rx(). This code has currently no way of
knowing what the size of the last packet was, and whether or not to
give back the urb due to a short read.
Fix this by introducing a new boolean flag in 'struct dma_channel', and
set it from musb_cppi41.c. If set, it will make the core do what the
DMA layer decided and complete the urb.
Signed-off-by: Daniel Mack <zonque@xxxxxxxxx>
Since this is used only for rx, Can you name newly added dma flag as
rx_packet_done?
Other than that.
Acked-by: George Cherian <george.cherian@xxxxxx>
---
drivers/usb/musb/musb_cppi41.c | 2 ++
drivers/usb/musb/musb_dma.h | 1 +
drivers/usb/musb/musb_host.c | 3 ++-
3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 7b8bbf5..a11bbb6 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -139,6 +139,7 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
cppi41_channel->channel.actual_len =
cppi41_channel->transferred;
cppi41_channel->channel.status = MUSB_DMA_STATUS_FREE;
+ cppi41_channel->channel.packet_done = true;
musb_dma_completion(musb, hw_ep->epnum, cppi41_channel->is_tx);
} else {
/* next iteration, reload */
@@ -450,6 +451,7 @@ static bool cppi41_configure_channel(struct dma_channel *channel,
dma_desc->callback = cppi41_dma_callback;
dma_desc->callback_param = channel;
cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
+ cppi41_channel->channel.packet_done = false;
save_rx_toggle(cppi41_channel);
dma_async_issue_pending(dc);
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 1345a4f..7253358 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -129,6 +129,7 @@ struct dma_channel {
size_t actual_len;
enum dma_channel_status status;
bool desired_mode;
+ bool packet_done;
};
/*
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 44cc57c..0f7ba24 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1737,7 +1737,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
/* done if urb buffer is full or short packet is recd */
done = (urb->actual_length + xfer_len >=
urb->transfer_buffer_length
- || dma->actual_len < qh->maxpacket);
+ || dma->actual_len < qh->maxpacket
+ || dma->packet_done);
}
/* send IN token for next packet, without AUTOREQ */
--
-George
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
