The drivers/usb/gadget directory contains many files.
Files which are related can be distributed into separate directories.
This patch moves the UDC drivers into a separate directory.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
---
drivers/usb/gadget/Kconfig | 369 +------------------------
drivers/usb/gadget/Makefile | 32 +--
drivers/usb/gadget/legacy/Makefile | 1 +
drivers/usb/gadget/udc/Kconfig | 383 ++++++++++++++++++++++++++
drivers/usb/gadget/udc/Makefile | 32 +++
drivers/usb/gadget/{ => udc}/amd5536udc.c | 0
drivers/usb/gadget/{ => udc}/amd5536udc.h | 0
drivers/usb/gadget/{ => udc}/at91_udc.c | 0
drivers/usb/gadget/{ => udc}/at91_udc.h | 0
drivers/usb/gadget/{ => udc}/atmel_usba_udc.c | 0
drivers/usb/gadget/{ => udc}/atmel_usba_udc.h | 0
drivers/usb/gadget/{ => udc}/bcm63xx_udc.c | 0
drivers/usb/gadget/{ => udc}/dummy_hcd.c | 0
drivers/usb/gadget/{ => udc}/fotg210-udc.c | 0
drivers/usb/gadget/{ => udc}/fotg210.h | 0
drivers/usb/gadget/{ => udc}/fsl_mxc_udc.c | 0
drivers/usb/gadget/{ => udc}/fsl_qe_udc.c | 0
drivers/usb/gadget/{ => udc}/fsl_qe_udc.h | 0
drivers/usb/gadget/{ => udc}/fsl_udc_core.c | 0
drivers/usb/gadget/{ => udc}/fsl_usb2_udc.h | 0
drivers/usb/gadget/{ => udc}/fusb300_udc.c | 0
drivers/usb/gadget/{ => udc}/fusb300_udc.h | 0
drivers/usb/gadget/{ => udc}/gadget_chips.h | 0
drivers/usb/gadget/{ => udc}/goku_udc.c | 0
drivers/usb/gadget/{ => udc}/goku_udc.h | 0
drivers/usb/gadget/{ => udc}/gr_udc.c | 0
drivers/usb/gadget/{ => udc}/gr_udc.h | 0
drivers/usb/gadget/{ => udc}/lpc32xx_udc.c | 0
drivers/usb/gadget/{ => udc}/m66592-udc.c | 0
drivers/usb/gadget/{ => udc}/m66592-udc.h | 0
drivers/usb/gadget/{ => udc}/mv_u3d.h | 0
drivers/usb/gadget/{ => udc}/mv_u3d_core.c | 0
drivers/usb/gadget/{ => udc}/mv_udc.h | 0
drivers/usb/gadget/{ => udc}/mv_udc_core.c | 0
drivers/usb/gadget/{ => udc}/net2272.c | 0
drivers/usb/gadget/{ => udc}/net2272.h | 0
drivers/usb/gadget/{ => udc}/net2280.c | 0
drivers/usb/gadget/{ => udc}/net2280.h | 0
drivers/usb/gadget/{ => udc}/omap_udc.c | 0
drivers/usb/gadget/{ => udc}/omap_udc.h | 0
drivers/usb/gadget/{ => udc}/pch_udc.c | 0
drivers/usb/gadget/{ => udc}/pxa25x_udc.c | 0
drivers/usb/gadget/{ => udc}/pxa25x_udc.h | 0
drivers/usb/gadget/{ => udc}/pxa27x_udc.c | 0
drivers/usb/gadget/{ => udc}/pxa27x_udc.h | 0
drivers/usb/gadget/{ => udc}/r8a66597-udc.c | 0
drivers/usb/gadget/{ => udc}/r8a66597-udc.h | 0
drivers/usb/gadget/{ => udc}/s3c-hsotg.c | 0
drivers/usb/gadget/{ => udc}/s3c-hsotg.h | 0
drivers/usb/gadget/{ => udc}/s3c-hsudc.c | 0
drivers/usb/gadget/{ => udc}/s3c2410_udc.c | 0
drivers/usb/gadget/{ => udc}/s3c2410_udc.h | 0
drivers/usb/gadget/{ => udc}/udc-core.c | 0
53 files changed, 419 insertions(+), 398 deletions(-)
create mode 100644 drivers/usb/gadget/udc/Kconfig
create mode 100644 drivers/usb/gadget/udc/Makefile
rename drivers/usb/gadget/{ => udc}/amd5536udc.c (100%)
rename drivers/usb/gadget/{ => udc}/amd5536udc.h (100%)
rename drivers/usb/gadget/{ => udc}/at91_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/at91_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/atmel_usba_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/atmel_usba_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/bcm63xx_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/dummy_hcd.c (100%)
rename drivers/usb/gadget/{ => udc}/fotg210-udc.c (100%)
rename drivers/usb/gadget/{ => udc}/fotg210.h (100%)
rename drivers/usb/gadget/{ => udc}/fsl_mxc_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/fsl_qe_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/fsl_qe_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/fsl_udc_core.c (100%)
rename drivers/usb/gadget/{ => udc}/fsl_usb2_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/fusb300_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/fusb300_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/gadget_chips.h (100%)
rename drivers/usb/gadget/{ => udc}/goku_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/goku_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/gr_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/gr_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/lpc32xx_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/m66592-udc.c (100%)
rename drivers/usb/gadget/{ => udc}/m66592-udc.h (100%)
rename drivers/usb/gadget/{ => udc}/mv_u3d.h (100%)
rename drivers/usb/gadget/{ => udc}/mv_u3d_core.c (100%)
rename drivers/usb/gadget/{ => udc}/mv_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/mv_udc_core.c (100%)
rename drivers/usb/gadget/{ => udc}/net2272.c (100%)
rename drivers/usb/gadget/{ => udc}/net2272.h (100%)
rename drivers/usb/gadget/{ => udc}/net2280.c (100%)
rename drivers/usb/gadget/{ => udc}/net2280.h (100%)
rename drivers/usb/gadget/{ => udc}/omap_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/omap_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/pch_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/pxa25x_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/pxa25x_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/pxa27x_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/pxa27x_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/r8a66597-udc.c (100%)
rename drivers/usb/gadget/{ => udc}/r8a66597-udc.h (100%)
rename drivers/usb/gadget/{ => udc}/s3c-hsotg.c (100%)
rename drivers/usb/gadget/{ => udc}/s3c-hsotg.h (100%)
rename drivers/usb/gadget/{ => udc}/s3c-hsudc.c (100%)
rename drivers/usb/gadget/{ => udc}/s3c2410_udc.c (100%)
rename drivers/usb/gadget/{ => udc}/s3c2410_udc.h (100%)
rename drivers/usb/gadget/{ => udc}/udc-core.c (100%)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 779aeea..5c822af 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -127,374 +127,7 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
a module parameter as well.
If unsure, say 2.
-#
-# USB Peripheral Controller Support
-#
-# The order here is alphabetical, except that integrated controllers go
-# before discrete ones so they will be the initial/default value:
-# - integrated/SOC controllers first
-# - licensed IP used in both SOC and discrete versions
-# - discrete ones (including all PCI-only controllers)
-# - debug/dummy gadget+hcd is last.
-#
-menu "USB Peripheral Controller"
-
-#
-# Integrated controllers
-#
-
-config USB_AT91
- tristate "Atmel AT91 USB Device Port"
- depends on ARCH_AT91
- help
- Many Atmel AT91 processors (such as the AT91RM2000) have a
- full speed USB Device Port with support for five configurable
- endpoints (plus endpoint zero).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "at91_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_LPC32XX
- tristate "LPC32XX USB Peripheral Controller"
- depends on ARCH_LPC32XX
- select USB_ISP1301
- help
- This option selects the USB device controller in the LPC32xx SoC.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "lpc32xx_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_ATMEL_USBA
- tristate "Atmel USBA"
- depends on AVR32 || ARCH_AT91
- help
- USBA is the integrated high-speed USB Device controller on
- the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
-
-config USB_BCM63XX_UDC
- tristate "Broadcom BCM63xx Peripheral Controller"
- depends on BCM63XX
- help
- Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
- high speed USB Device Port with support for four fixed endpoints
- (plus endpoint zero).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "bcm63xx_udc".
-
-config USB_FSL_USB2
- tristate "Freescale Highspeed USB DR Peripheral Controller"
- depends on FSL_SOC || ARCH_MXC
- select USB_FSL_MPH_DR_OF if OF
- help
- Some of Freescale PowerPC and i.MX processors have a High Speed
- Dual-Role(DR) USB controller, which supports device mode.
-
- The number of programmable endpoints is different through
- SOC revisions.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "fsl_usb2_udc" and force
- all gadget drivers to also be dynamically linked.
-
-config USB_FUSB300
- tristate "Faraday FUSB300 USB Peripheral Controller"
- depends on !PHYS_ADDR_T_64BIT && HAS_DMA
- help
- Faraday usb device controller FUSB300 driver
-
-config USB_FOTG210_UDC
- depends on HAS_DMA
- tristate "Faraday FOTG210 USB Peripheral Controller"
- help
- Faraday USB2.0 OTG controller which can be configured as
- high speed or full speed USB device. This driver supppors
- Bulk Transfer so far.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "fotg210_udc".
-
-config USB_GR_UDC
- tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
- depends on HAS_DMA
- help
- Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
- VHDL IP core library.
-
-config USB_OMAP
- tristate "OMAP USB Device Controller"
- depends on ARCH_OMAP1
- select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
- help
- Many Texas Instruments OMAP processors have flexible full
- speed USB device controllers, with support for up to 30
- endpoints (plus endpoint zero). This driver supports the
- controller in the OMAP 1611, and should work with controllers
- in other OMAP processors too, given minor tweaks.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "omap_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_PXA25X
- tristate "PXA 25x or IXP 4xx"
- depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
- help
- Intel's PXA 25x series XScale ARM-5TE processors include
- an integrated full speed USB 1.1 device controller. The
- controller in the IXP 4xx series is register-compatible.
-
- It has fifteen fixed-function endpoints, as well as endpoint
- zero (for control transfers).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "pxa25x_udc" and force all
- gadget drivers to also be dynamically linked.
-
-# if there's only one gadget driver, using only two bulk endpoints,
-# don't waste memory for the other endpoints
-config USB_PXA25X_SMALL
- depends on USB_PXA25X
- bool
- default n if USB_ETH_RNDIS
- default y if USB_ZERO
- default y if USB_ETH
- default y if USB_G_SERIAL
-
-config USB_R8A66597
- tristate "Renesas R8A66597 USB Peripheral Controller"
- depends on HAS_DMA
- help
- R8A66597 is a discrete USB host and peripheral controller chip that
- supports both full and high speed USB 2.0 data transfers.
- It has nine configurable endpoints, and endpoint zero.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "r8a66597_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_RENESAS_USBHS_UDC
- tristate 'Renesas USBHS controller'
- depends on USB_RENESAS_USBHS
- help
- Renesas USBHS is a discrete USB host and peripheral controller chip
- that supports both full and high speed USB 2.0 data transfers.
- It has nine or more configurable endpoints, and endpoint zero.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "renesas_usbhs" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_PXA27X
- tristate "PXA 27x"
- help
- Intel's PXA 27x series XScale ARM v5TE processors include
- an integrated full speed USB 1.1 device controller.
-
- It has up to 23 endpoints, as well as endpoint zero (for
- control transfers).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "pxa27x_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_S3C_HSOTG
- tristate "Designware/S3C HS/OtG USB Device controller"
- help
- The Designware USB2.0 high-speed gadget controller
- integrated into many SoCs.
-
-config USB_S3C2410
- tristate "S3C2410 USB Device Controller"
- depends on ARCH_S3C24XX
- help
- Samsung's S3C2410 is an ARM-4 processor with an integrated
- full speed USB 1.1 device controller. It has 4 configurable
- endpoints, as well as endpoint zero (for control transfers).
-
- This driver has been tested on the S3C2410, S3C2412, and
- S3C2440 processors.
-
-config USB_S3C2410_DEBUG
- boolean "S3C2410 udc debug messages"
- depends on USB_S3C2410
-
-config USB_S3C_HSUDC
- tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
- depends on ARCH_S3C24XX
- help
- Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
- integrated with dual speed USB 2.0 device controller. It has
- 8 endpoints, as well as endpoint zero.
-
- This driver has been tested on S3C2416 and S3C2450 processors.
-
-config USB_MV_UDC
- tristate "Marvell USB2.0 Device Controller"
- depends on HAS_DMA
- help
- Marvell Socs (including PXA and MMP series) include a high speed
- USB2.0 OTG controller, which can be configured as high speed or
- full speed USB peripheral.
-
-config USB_MV_U3D
- depends on HAS_DMA
- tristate "MARVELL PXA2128 USB 3.0 controller"
- help
- MARVELL PXA2128 Processor series include a super speed USB3.0 device
- controller, which support super speed USB peripheral.
-
-#
-# Controllers available in both integrated and discrete versions
-#
-
-config USB_M66592
- tristate "Renesas M66592 USB Peripheral Controller"
- help
- M66592 is a discrete USB peripheral controller chip that
- supports both full and high speed USB 2.0 data transfers.
- It has seven configurable endpoints, and endpoint zero.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "m66592_udc" and force all
- gadget drivers to also be dynamically linked.
-
-#
-# Controllers available only in discrete form (and all PCI controllers)
-#
-
-config USB_AMD5536UDC
- tristate "AMD5536 UDC"
- depends on PCI
- help
- The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
- It is a USB Highspeed DMA capable USB device controller. Beside ep0
- it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
- The UDC port supports OTG operation, and may be used as a host port
- if it's not being used to implement peripheral or OTG roles.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "amd5536udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_FSL_QE
- tristate "Freescale QE/CPM USB Device Controller"
- depends on FSL_SOC && (QUICC_ENGINE || CPM)
- help
- Some of Freescale PowerPC processors have a Full Speed
- QE/CPM2 USB controller, which support device mode with 4
- programmable endpoints. This driver supports the
- controller in the MPC8360 and MPC8272, and should work with
- controllers having QE or CPM2, given minor tweaks.
-
- Set CONFIG_USB_GADGET to "m" to build this driver as a
- dynamically linked module called "fsl_qe_udc".
-
-config USB_NET2272
- tristate "PLX NET2272"
- help
- PLX NET2272 is a USB peripheral controller which supports
- both full and high speed USB 2.0 data transfers.
-
- It has three configurable endpoints, as well as endpoint zero
- (for control transfer).
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "net2272" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_NET2272_DMA
- boolean "Support external DMA controller"
- depends on USB_NET2272 && HAS_DMA
- help
- The NET2272 part can optionally support an external DMA
- controller, but your board has to have support in the
- driver itself.
-
- If unsure, say "N" here. The driver works fine in PIO mode.
-
-config USB_NET2280
- tristate "NetChip 228x"
- depends on PCI
- help
- NetChip 2280 / 2282 is a PCI based USB peripheral controller which
- supports both full and high speed USB 2.0 data transfers.
-
- It has six configurable endpoints, as well as endpoint zero
- (for control transfers) and several endpoints with dedicated
- functions.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "net2280" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_GOKU
- tristate "Toshiba TC86C001 'Goku-S'"
- depends on PCI
- help
- The Toshiba TC86C001 is a PCI device which includes controllers
- for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
-
- The device controller has three configurable (bulk or interrupt)
- endpoints, plus endpoint zero (for control transfers).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "goku_udc" and to force all
- gadget drivers to also be dynamically linked.
-
-config USB_EG20T
- tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
- depends on PCI
- help
- This is a USB device driver for EG20T PCH.
- EG20T PCH is the platform controller hub that is used in Intel's
- general embedded platform. EG20T PCH has USB device interface.
- Using this interface, it is able to access system devices connected
- to USB device.
- This driver enables USB device function.
- USB device is a USB peripheral controller which
- supports both full and high speed USB 2.0 data transfers.
- This driver supports both control transfer and bulk transfer modes.
- This driver dose not support interrupt transfer or isochronous
- transfer modes.
-
- This driver also can be used for LAPIS Semiconductor's ML7213 which is
- for IVI(In-Vehicle Infotainment) use.
- ML7831 is for general purpose use.
- ML7213/ML7831 is companion chip for Intel Atom E6xx series.
- ML7213/ML7831 is completely compatible for Intel EG20T PCH.
-
-#
-# LAST -- dummy/emulated controller
-#
-
-config USB_DUMMY_HCD
- tristate "Dummy HCD (DEVELOPMENT)"
- depends on USB=y || (USB=m && USB_GADGET=m)
- help
- This host controller driver emulates USB, looping all data transfer
- requests back to a USB "gadget driver" in the same host. The host
- side is the master; the gadget side is the slave. Gadget drivers
- can be high, full, or low speed; and they have access to endpoints
- like those from NET2280, PXA2xx, or SA1100 hardware.
-
- This may help in some stages of creating a driver to embed in a
- Linux device, since it lets you debug several parts of the gadget
- driver without its hardware or drivers being involved.
-
- Since such a gadget side driver needs to interoperate with a host
- side Linux-USB device driver, this may help to debug both sides
- of a USB protocol stack.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "dummy_hcd" and force all
- gadget drivers to also be dynamically linked.
-
-# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
-# first and will be selected by default.
-
-endmenu
+source "drivers/usb/gadget/udc/Kconfig"
#
# USB Gadget Drivers
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 81e82e9..16938ff 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -3,40 +3,12 @@
#
subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG
+ccflags-y += -I$(PWD)/drivers/usb/gadget/udc
-obj-$(CONFIG_USB_GADGET) += udc-core.o
-obj-$(CONFIG_USB_GADGET) += legacy/
+obj-$(CONFIG_USB_GADGET) += legacy/ udc/
obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o
libcomposite-y := usbstring.o config.o epautoconf.o
libcomposite-y += composite.o functions.o configfs.o u_f.o
-obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
-obj-$(CONFIG_USB_NET2272) += net2272.o
-obj-$(CONFIG_USB_NET2280) += net2280.o
-obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
-obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o
-obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
-obj-$(CONFIG_USB_GOKU) += goku_udc.o
-obj-$(CONFIG_USB_OMAP) += omap_udc.o
-obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
-obj-$(CONFIG_USB_AT91) += at91_udc.o
-obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
-obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o
-obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
-fsl_usb2_udc-y := fsl_udc_core.o
-fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o
-obj-$(CONFIG_USB_M66592) += m66592-udc.o
-obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o
-obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
-obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o
-obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o
-obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o
-obj-$(CONFIG_USB_EG20T) += pch_udc.o
-obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
-mv_udc-y := mv_udc_core.o
-obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
-obj-$(CONFIG_USB_FOTG210_UDC) += fotg210-udc.o
-obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
-obj-$(CONFIG_USB_GR_UDC) += gr_udc.o
# USB Functions
usb_f_acm-y := f_acm.o
diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile
index fbb32aa..d457074 100644
--- a/drivers/usb/gadget/legacy/Makefile
+++ b/drivers/usb/gadget/legacy/Makefile
@@ -3,6 +3,7 @@
#
ccflags-y := -I$(PWD)/drivers/usb/gadget/
+ccflags-y += -I$(PWD)/drivers/usb/gadget/udc/
g_zero-y := zero.o
g_audio-y := audio.o
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
new file mode 100644
index 0000000..81f52bd
--- /dev/null
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -0,0 +1,383 @@
+#
+# USB Gadget support on a system involves
+# (a) a peripheral controller, and
+# (b) the gadget driver using it.
+#
+# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+# - Some systems have both kinds of controllers.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+
+#
+# USB Peripheral Controller Support
+#
+# The order here is alphabetical, except that integrated controllers go
+# before discrete ones so they will be the initial/default value:
+# - integrated/SOC controllers first
+# - licensed IP used in both SOC and discrete versions
+# - discrete ones (including all PCI-only controllers)
+# - debug/dummy gadget+hcd is last.
+#
+menu "USB Peripheral Controller"
+
+#
+# Integrated controllers
+#
+
+config USB_AT91
+ tristate "Atmel AT91 USB Device Port"
+ depends on ARCH_AT91
+ help
+ Many Atmel AT91 processors (such as the AT91RM2000) have a
+ full speed USB Device Port with support for five configurable
+ endpoints (plus endpoint zero).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "at91_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_LPC32XX
+ tristate "LPC32XX USB Peripheral Controller"
+ depends on ARCH_LPC32XX
+ select USB_ISP1301
+ help
+ This option selects the USB device controller in the LPC32xx SoC.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "lpc32xx_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_ATMEL_USBA
+ tristate "Atmel USBA"
+ depends on AVR32 || ARCH_AT91
+ help
+ USBA is the integrated high-speed USB Device controller on
+ the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
+
+config USB_BCM63XX_UDC
+ tristate "Broadcom BCM63xx Peripheral Controller"
+ depends on BCM63XX
+ help
+ Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
+ high speed USB Device Port with support for four fixed endpoints
+ (plus endpoint zero).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "bcm63xx_udc".
+
+config USB_FSL_USB2
+ tristate "Freescale Highspeed USB DR Peripheral Controller"
+ depends on FSL_SOC || ARCH_MXC
+ select USB_FSL_MPH_DR_OF if OF
+ help
+ Some of Freescale PowerPC and i.MX processors have a High Speed
+ Dual-Role(DR) USB controller, which supports device mode.
+
+ The number of programmable endpoints is different through
+ SOC revisions.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "fsl_usb2_udc" and force
+ all gadget drivers to also be dynamically linked.
+
+config USB_FUSB300
+ tristate "Faraday FUSB300 USB Peripheral Controller"
+ depends on !PHYS_ADDR_T_64BIT && HAS_DMA
+ help
+ Faraday usb device controller FUSB300 driver
+
+config USB_FOTG210_UDC
+ depends on HAS_DMA
+ tristate "Faraday FOTG210 USB Peripheral Controller"
+ help
+ Faraday USB2.0 OTG controller which can be configured as
+ high speed or full speed USB device. This driver supppors
+ Bulk Transfer so far.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "fotg210_udc".
+
+config USB_GR_UDC
+ tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
+ depends on HAS_DMA
+ help
+ Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
+ VHDL IP core library.
+
+config USB_OMAP
+ tristate "OMAP USB Device Controller"
+ depends on ARCH_OMAP1
+ select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+ help
+ Many Texas Instruments OMAP processors have flexible full
+ speed USB device controllers, with support for up to 30
+ endpoints (plus endpoint zero). This driver supports the
+ controller in the OMAP 1611, and should work with controllers
+ in other OMAP processors too, given minor tweaks.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "omap_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_PXA25X
+ tristate "PXA 25x or IXP 4xx"
+ depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+ help
+ Intel's PXA 25x series XScale ARM-5TE processors include
+ an integrated full speed USB 1.1 device controller. The
+ controller in the IXP 4xx series is register-compatible.
+
+ It has fifteen fixed-function endpoints, as well as endpoint
+ zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "pxa25x_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+# if there's only one gadget driver, using only two bulk endpoints,
+# don't waste memory for the other endpoints
+config USB_PXA25X_SMALL
+ depends on USB_PXA25X
+ bool
+ default n if USB_ETH_RNDIS
+ default y if USB_ZERO
+ default y if USB_ETH
+ default y if USB_G_SERIAL
+
+config USB_R8A66597
+ tristate "Renesas R8A66597 USB Peripheral Controller"
+ depends on HAS_DMA
+ help
+ R8A66597 is a discrete USB host and peripheral controller chip that
+ supports both full and high speed USB 2.0 data transfers.
+ It has nine configurable endpoints, and endpoint zero.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "r8a66597_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_RENESAS_USBHS_UDC
+ tristate 'Renesas USBHS controller'
+ depends on USB_RENESAS_USBHS
+ help
+ Renesas USBHS is a discrete USB host and peripheral controller chip
+ that supports both full and high speed USB 2.0 data transfers.
+ It has nine or more configurable endpoints, and endpoint zero.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "renesas_usbhs" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+ tristate "PXA 27x"
+ help
+ Intel's PXA 27x series XScale ARM v5TE processors include
+ an integrated full speed USB 1.1 device controller.
+
+ It has up to 23 endpoints, as well as endpoint zero (for
+ control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "pxa27x_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_S3C_HSOTG
+ tristate "Designware/S3C HS/OtG USB Device controller"
+ help
+ The Designware USB2.0 high-speed gadget controller
+ integrated into many SoCs.
+
+config USB_S3C2410
+ tristate "S3C2410 USB Device Controller"
+ depends on ARCH_S3C24XX
+ help
+ Samsung's S3C2410 is an ARM-4 processor with an integrated
+ full speed USB 1.1 device controller. It has 4 configurable
+ endpoints, as well as endpoint zero (for control transfers).
+
+ This driver has been tested on the S3C2410, S3C2412, and
+ S3C2440 processors.
+
+config USB_S3C2410_DEBUG
+ boolean "S3C2410 udc debug messages"
+ depends on USB_S3C2410
+
+config USB_S3C_HSUDC
+ tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
+ depends on ARCH_S3C24XX
+ help
+ Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
+ integrated with dual speed USB 2.0 device controller. It has
+ 8 endpoints, as well as endpoint zero.
+
+ This driver has been tested on S3C2416 and S3C2450 processors.
+
+config USB_MV_UDC
+ tristate "Marvell USB2.0 Device Controller"
+ depends on HAS_DMA
+ help
+ Marvell Socs (including PXA and MMP series) include a high speed
+ USB2.0 OTG controller, which can be configured as high speed or
+ full speed USB peripheral.
+
+config USB_MV_U3D
+ depends on HAS_DMA
+ tristate "MARVELL PXA2128 USB 3.0 controller"
+ help
+ MARVELL PXA2128 Processor series include a super speed USB3.0 device
+ controller, which support super speed USB peripheral.
+
+#
+# Controllers available in both integrated and discrete versions
+#
+
+config USB_M66592
+ tristate "Renesas M66592 USB Peripheral Controller"
+ help
+ M66592 is a discrete USB peripheral controller chip that
+ supports both full and high speed USB 2.0 data transfers.
+ It has seven configurable endpoints, and endpoint zero.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "m66592_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+#
+# Controllers available only in discrete form (and all PCI controllers)
+#
+
+config USB_AMD5536UDC
+ tristate "AMD5536 UDC"
+ depends on PCI
+ help
+ The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
+ It is a USB Highspeed DMA capable USB device controller. Beside ep0
+ it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+ The UDC port supports OTG operation, and may be used as a host port
+ if it's not being used to implement peripheral or OTG roles.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "amd5536udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_FSL_QE
+ tristate "Freescale QE/CPM USB Device Controller"
+ depends on FSL_SOC && (QUICC_ENGINE || CPM)
+ help
+ Some of Freescale PowerPC processors have a Full Speed
+ QE/CPM2 USB controller, which support device mode with 4
+ programmable endpoints. This driver supports the
+ controller in the MPC8360 and MPC8272, and should work with
+ controllers having QE or CPM2, given minor tweaks.
+
+ Set CONFIG_USB_GADGET to "m" to build this driver as a
+ dynamically linked module called "fsl_qe_udc".
+
+config USB_NET2272
+ tristate "PLX NET2272"
+ help
+ PLX NET2272 is a USB peripheral controller which supports
+ both full and high speed USB 2.0 data transfers.
+
+ It has three configurable endpoints, as well as endpoint zero
+ (for control transfer).
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "net2272" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_NET2272_DMA
+ boolean "Support external DMA controller"
+ depends on USB_NET2272 && HAS_DMA
+ help
+ The NET2272 part can optionally support an external DMA
+ controller, but your board has to have support in the
+ driver itself.
+
+ If unsure, say "N" here. The driver works fine in PIO mode.
+
+config USB_NET2280
+ tristate "NetChip 228x"
+ depends on PCI
+ help
+ NetChip 2280 / 2282 is a PCI based USB peripheral controller which
+ supports both full and high speed USB 2.0 data transfers.
+
+ It has six configurable endpoints, as well as endpoint zero
+ (for control transfers) and several endpoints with dedicated
+ functions.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "net2280" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_GOKU
+ tristate "Toshiba TC86C001 'Goku-S'"
+ depends on PCI
+ help
+ The Toshiba TC86C001 is a PCI device which includes controllers
+ for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
+
+ The device controller has three configurable (bulk or interrupt)
+ endpoints, plus endpoint zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "goku_udc" and to force all
+ gadget drivers to also be dynamically linked.
+
+config USB_EG20T
+ tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+ depends on PCI
+ help
+ This is a USB device driver for EG20T PCH.
+ EG20T PCH is the platform controller hub that is used in Intel's
+ general embedded platform. EG20T PCH has USB device interface.
+ Using this interface, it is able to access system devices connected
+ to USB device.
+ This driver enables USB device function.
+ USB device is a USB peripheral controller which
+ supports both full and high speed USB 2.0 data transfers.
+ This driver supports both control transfer and bulk transfer modes.
+ This driver dose not support interrupt transfer or isochronous
+ transfer modes.
+
+ This driver also can be used for LAPIS Semiconductor's ML7213 which is
+ for IVI(In-Vehicle Infotainment) use.
+ ML7831 is for general purpose use.
+ ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7831 is completely compatible for Intel EG20T PCH.
+
+#
+# LAST -- dummy/emulated controller
+#
+
+config USB_DUMMY_HCD
+ tristate "Dummy HCD (DEVELOPMENT)"
+ depends on USB=y || (USB=m && USB_GADGET=m)
+ help
+ This host controller driver emulates USB, looping all data transfer
+ requests back to a USB "gadget driver" in the same host. The host
+ side is the master; the gadget side is the slave. Gadget drivers
+ can be high, full, or low speed; and they have access to endpoints
+ like those from NET2280, PXA2xx, or SA1100 hardware.
+
+ This may help in some stages of creating a driver to embed in a
+ Linux device, since it lets you debug several parts of the gadget
+ driver without its hardware or drivers being involved.
+
+ Since such a gadget side driver needs to interoperate with a host
+ side Linux-USB device driver, this may help to debug both sides
+ of a USB protocol stack.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "dummy_hcd" and force all
+ gadget drivers to also be dynamically linked.
+
+# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
+# first and will be selected by default.
+
+endmenu
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
new file mode 100644
index 0000000..2bee959
--- /dev/null
+++ b/drivers/usb/gadget/udc/Makefile
@@ -0,0 +1,32 @@
+#
+# USB peripheral controller drivers
+#
+obj-$(CONFIG_USB_GADGET) += udc-core.o
+obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
+obj-$(CONFIG_USB_NET2272) += net2272.o
+obj-$(CONFIG_USB_NET2280) += net2280.o
+obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
+obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o
+obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
+obj-$(CONFIG_USB_GOKU) += goku_udc.o
+obj-$(CONFIG_USB_OMAP) += omap_udc.o
+obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
+obj-$(CONFIG_USB_AT91) += at91_udc.o
+obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
+obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o
+obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
+fsl_usb2_udc-y := fsl_udc_core.o
+fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o
+obj-$(CONFIG_USB_M66592) += m66592-udc.o
+obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o
+obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
+obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o
+obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o
+obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o
+obj-$(CONFIG_USB_EG20T) += pch_udc.o
+obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
+mv_udc-y := mv_udc_core.o
+obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
+obj-$(CONFIG_USB_FOTG210_UDC) += fotg210-udc.o
+obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
+obj-$(CONFIG_USB_GR_UDC) += gr_udc.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
similarity index 100%
rename from drivers/usb/gadget/amd5536udc.c
rename to drivers/usb/gadget/udc/amd5536udc.c
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h
similarity index 100%
rename from drivers/usb/gadget/amd5536udc.h
rename to drivers/usb/gadget/udc/amd5536udc.h
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
similarity index 100%
rename from drivers/usb/gadget/at91_udc.c
rename to drivers/usb/gadget/udc/at91_udc.c
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h
similarity index 100%
rename from drivers/usb/gadget/at91_udc.h
rename to drivers/usb/gadget/udc/at91_udc.h
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
similarity index 100%
rename from drivers/usb/gadget/atmel_usba_udc.c
rename to drivers/usb/gadget/udc/atmel_usba_udc.c
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
similarity index 100%
rename from drivers/usb/gadget/atmel_usba_udc.h
rename to drivers/usb/gadget/udc/atmel_usba_udc.h
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
similarity index 100%
rename from drivers/usb/gadget/bcm63xx_udc.c
rename to drivers/usb/gadget/udc/bcm63xx_udc.c
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
similarity index 100%
rename from drivers/usb/gadget/dummy_hcd.c
rename to drivers/usb/gadget/udc/dummy_hcd.c
diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
similarity index 100%
rename from drivers/usb/gadget/fotg210-udc.c
rename to drivers/usb/gadget/udc/fotg210-udc.c
diff --git a/drivers/usb/gadget/fotg210.h b/drivers/usb/gadget/udc/fotg210.h
similarity index 100%
rename from drivers/usb/gadget/fotg210.h
rename to drivers/usb/gadget/udc/fotg210.h
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/udc/fsl_mxc_udc.c
similarity index 100%
rename from drivers/usb/gadget/fsl_mxc_udc.c
rename to drivers/usb/gadget/udc/fsl_mxc_udc.c
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
similarity index 100%
rename from drivers/usb/gadget/fsl_qe_udc.c
rename to drivers/usb/gadget/udc/fsl_qe_udc.c
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
similarity index 100%
rename from drivers/usb/gadget/fsl_qe_udc.h
rename to drivers/usb/gadget/udc/fsl_qe_udc.h
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
similarity index 100%
rename from drivers/usb/gadget/fsl_udc_core.c
rename to drivers/usb/gadget/udc/fsl_udc_core.c
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h
similarity index 100%
rename from drivers/usb/gadget/fsl_usb2_udc.h
rename to drivers/usb/gadget/udc/fsl_usb2_udc.h
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
similarity index 100%
rename from drivers/usb/gadget/fusb300_udc.c
rename to drivers/usb/gadget/udc/fusb300_udc.c
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/udc/fusb300_udc.h
similarity index 100%
rename from drivers/usb/gadget/fusb300_udc.h
rename to drivers/usb/gadget/udc/fusb300_udc.h
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/udc/gadget_chips.h
similarity index 100%
rename from drivers/usb/gadget/gadget_chips.h
rename to drivers/usb/gadget/udc/gadget_chips.h
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
similarity index 100%
rename from drivers/usb/gadget/goku_udc.c
rename to drivers/usb/gadget/udc/goku_udc.c
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/udc/goku_udc.h
similarity index 100%
rename from drivers/usb/gadget/goku_udc.h
rename to drivers/usb/gadget/udc/goku_udc.h
diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
similarity index 100%
rename from drivers/usb/gadget/gr_udc.c
rename to drivers/usb/gadget/udc/gr_udc.c
diff --git a/drivers/usb/gadget/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h
similarity index 100%
rename from drivers/usb/gadget/gr_udc.h
rename to drivers/usb/gadget/udc/gr_udc.h
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
similarity index 100%
rename from drivers/usb/gadget/lpc32xx_udc.c
rename to drivers/usb/gadget/udc/lpc32xx_udc.c
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
similarity index 100%
rename from drivers/usb/gadget/m66592-udc.c
rename to drivers/usb/gadget/udc/m66592-udc.c
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/udc/m66592-udc.h
similarity index 100%
rename from drivers/usb/gadget/m66592-udc.h
rename to drivers/usb/gadget/udc/m66592-udc.h
diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
similarity index 100%
rename from drivers/usb/gadget/mv_u3d.h
rename to drivers/usb/gadget/udc/mv_u3d.h
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
similarity index 100%
rename from drivers/usb/gadget/mv_u3d_core.c
rename to drivers/usb/gadget/udc/mv_u3d_core.c
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/udc/mv_udc.h
similarity index 100%
rename from drivers/usb/gadget/mv_udc.h
rename to drivers/usb/gadget/udc/mv_udc.h
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
similarity index 100%
rename from drivers/usb/gadget/mv_udc_core.c
rename to drivers/usb/gadget/udc/mv_udc_core.c
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/udc/net2272.c
similarity index 100%
rename from drivers/usb/gadget/net2272.c
rename to drivers/usb/gadget/udc/net2272.c
diff --git a/drivers/usb/gadget/net2272.h b/drivers/usb/gadget/udc/net2272.h
similarity index 100%
rename from drivers/usb/gadget/net2272.h
rename to drivers/usb/gadget/udc/net2272.h
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/udc/net2280.c
similarity index 100%
rename from drivers/usb/gadget/net2280.c
rename to drivers/usb/gadget/udc/net2280.c
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/udc/net2280.h
similarity index 100%
rename from drivers/usb/gadget/net2280.h
rename to drivers/usb/gadget/udc/net2280.h
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
similarity index 100%
rename from drivers/usb/gadget/omap_udc.c
rename to drivers/usb/gadget/udc/omap_udc.c
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/udc/omap_udc.h
similarity index 100%
rename from drivers/usb/gadget/omap_udc.h
rename to drivers/usb/gadget/udc/omap_udc.h
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
similarity index 100%
rename from drivers/usb/gadget/pch_udc.c
rename to drivers/usb/gadget/udc/pch_udc.c
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
similarity index 100%
rename from drivers/usb/gadget/pxa25x_udc.c
rename to drivers/usb/gadget/udc/pxa25x_udc.c
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h
similarity index 100%
rename from drivers/usb/gadget/pxa25x_udc.h
rename to drivers/usb/gadget/udc/pxa25x_udc.h
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
similarity index 100%
rename from drivers/usb/gadget/pxa27x_udc.c
rename to drivers/usb/gadget/udc/pxa27x_udc.c
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h
similarity index 100%
rename from drivers/usb/gadget/pxa27x_udc.h
rename to drivers/usb/gadget/udc/pxa27x_udc.h
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
similarity index 100%
rename from drivers/usb/gadget/r8a66597-udc.c
rename to drivers/usb/gadget/udc/r8a66597-udc.c
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/udc/r8a66597-udc.h
similarity index 100%
rename from drivers/usb/gadget/r8a66597-udc.h
rename to drivers/usb/gadget/udc/r8a66597-udc.h
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/udc/s3c-hsotg.c
similarity index 100%
rename from drivers/usb/gadget/s3c-hsotg.c
rename to drivers/usb/gadget/udc/s3c-hsotg.c
diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/udc/s3c-hsotg.h
similarity index 100%
rename from drivers/usb/gadget/s3c-hsotg.h
rename to drivers/usb/gadget/udc/s3c-hsotg.h
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
similarity index 100%
rename from drivers/usb/gadget/s3c-hsudc.c
rename to drivers/usb/gadget/udc/s3c-hsudc.c
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
similarity index 100%
rename from drivers/usb/gadget/s3c2410_udc.c
rename to drivers/usb/gadget/udc/s3c2410_udc.c
diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
similarity index 100%
rename from drivers/usb/gadget/s3c2410_udc.h
rename to drivers/usb/gadget/udc/s3c2410_udc.h
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
similarity index 100%
rename from drivers/usb/gadget/udc-core.c
rename to drivers/usb/gadget/udc/udc-core.c
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
