The drivers/usb/gadget directory contains many files.
Files which are related can be distributed into separate directories.
This patch moves the legacy gadgets (i.e. those not using configfs)
into a separate directory.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
---
drivers/usb/gadget/Kconfig | 461 +---------------------
drivers/usb/gadget/Makefile | 45 +--
drivers/usb/gadget/legacy/Kconfig | 475 +++++++++++++++++++++++
drivers/usb/gadget/legacy/Makefile | 42 ++
drivers/usb/gadget/{ => legacy}/acm_ms.c | 0
drivers/usb/gadget/{ => legacy}/audio.c | 0
drivers/usb/gadget/{ => legacy}/cdc2.c | 0
drivers/usb/gadget/{ => legacy}/dbgp.c | 0
drivers/usb/gadget/{ => legacy}/ether.c | 0
drivers/usb/gadget/{ => legacy}/g_ffs.c | 0
drivers/usb/gadget/{ => legacy}/gmidi.c | 0
drivers/usb/gadget/{ => legacy}/hid.c | 0
drivers/usb/gadget/{ => legacy}/inode.c | 0
drivers/usb/gadget/{ => legacy}/mass_storage.c | 0
drivers/usb/gadget/{ => legacy}/multi.c | 0
drivers/usb/gadget/{ => legacy}/ncm.c | 0
drivers/usb/gadget/{ => legacy}/nokia.c | 0
drivers/usb/gadget/{ => legacy}/printer.c | 0
drivers/usb/gadget/{ => legacy}/serial.c | 0
drivers/usb/gadget/{ => legacy}/tcm_usb_gadget.c | 0
drivers/usb/gadget/{ => legacy}/tcm_usb_gadget.h | 0
drivers/usb/gadget/{ => legacy}/webcam.c | 0
drivers/usb/gadget/{ => legacy}/zero.c | 0
23 files changed, 521 insertions(+), 502 deletions(-)
create mode 100644 drivers/usb/gadget/legacy/Kconfig
create mode 100644 drivers/usb/gadget/legacy/Makefile
rename drivers/usb/gadget/{ => legacy}/acm_ms.c (100%)
rename drivers/usb/gadget/{ => legacy}/audio.c (100%)
rename drivers/usb/gadget/{ => legacy}/cdc2.c (100%)
rename drivers/usb/gadget/{ => legacy}/dbgp.c (100%)
rename drivers/usb/gadget/{ => legacy}/ether.c (100%)
rename drivers/usb/gadget/{ => legacy}/g_ffs.c (100%)
rename drivers/usb/gadget/{ => legacy}/gmidi.c (100%)
rename drivers/usb/gadget/{ => legacy}/hid.c (100%)
rename drivers/usb/gadget/{ => legacy}/inode.c (100%)
rename drivers/usb/gadget/{ => legacy}/mass_storage.c (100%)
rename drivers/usb/gadget/{ => legacy}/multi.c (100%)
rename drivers/usb/gadget/{ => legacy}/ncm.c (100%)
rename drivers/usb/gadget/{ => legacy}/nokia.c (100%)
rename drivers/usb/gadget/{ => legacy}/printer.c (100%)
rename drivers/usb/gadget/{ => legacy}/serial.c (100%)
rename drivers/usb/gadget/{ => legacy}/tcm_usb_gadget.c (100%)
rename drivers/usb/gadget/{ => legacy}/tcm_usb_gadget.h (100%)
rename drivers/usb/gadget/{ => legacy}/webcam.c (100%)
rename drivers/usb/gadget/{ => legacy}/zero.c (100%)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3557c7e..779aeea 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -720,466 +720,7 @@ config USB_CONFIGFS_F_FS
implemented in kernel space (for instance Ethernet, serial or
mass storage) and other are implemented in user space.
-config USB_ZERO
- tristate "Gadget Zero (DEVELOPMENT)"
- select USB_LIBCOMPOSITE
- select USB_F_SS_LB
- help
- Gadget Zero is a two-configuration device. It either sinks and
- sources bulk data; or it loops back a configurable number of
- transfers. It also implements control requests, for "chapter 9"
- conformance. The driver needs only two bulk-capable endpoints, so
- it can work on top of most device-side usb controllers. It's
- useful for testing, and is also a working example showing how
- USB "gadget drivers" can be written.
-
- Make this be the first driver you try using on top of any new
- USB peripheral controller driver. Then you can use host-side
- test software, like the "usbtest" driver, to put your hardware
- and its driver through a basic set of functional tests.
-
- Gadget Zero also works with the host-side "usb-skeleton" driver,
- and with many kinds of host-side test software. You may need
- to tweak product and vendor IDs before host software knows about
- this device, and arrange to select an appropriate configuration.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_zero".
-
-config USB_ZERO_HNPTEST
- boolean "HNP Test Device"
- depends on USB_ZERO && USB_OTG
- help
- You can configure this device to enumerate using the device
- identifiers of the USB-OTG test device. That means that when
- this gadget connects to another OTG device, with this one using
- the "B-Peripheral" role, that device will use HNP to let this
- one serve as the USB host instead (in the "B-Host" role).
-
-config USB_AUDIO
- tristate "Audio Gadget"
- depends on SND
- select USB_LIBCOMPOSITE
- select SND_PCM
- help
- This Gadget Audio driver is compatible with USB Audio Class
- specification 2.0. It implements 1 AudioControl interface,
- 1 AudioStreaming Interface each for USB-OUT and USB-IN.
- Number of channels, sample rate and sample size can be
- specified as module parameters.
- This driver doesn't expect any real Audio codec to be present
- on the device - the audio streams are simply sinked to and
- sourced from a virtual ALSA sound card created. The user-space
- application may choose to do whatever it wants with the data
- received from the USB Host and choose to provide whatever it
- wants as audio data to the USB Host.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_audio".
-
-config GADGET_UAC1
- bool "UAC 1.0 (Legacy)"
- depends on USB_AUDIO
- help
- If you instead want older UAC Spec-1.0 driver that also has audio
- paths hardwired to the Audio codec chip on-board and doesn't work
- without one.
-
-config USB_ETH
- tristate "Ethernet Gadget (with CDC Ethernet support)"
- depends on NET
- select USB_LIBCOMPOSITE
- select USB_U_ETHER
- select USB_F_ECM
- select USB_F_SUBSET
- select CRC32
- help
- This driver implements Ethernet style communication, in one of
- several ways:
-
- - The "Communication Device Class" (CDC) Ethernet Control Model.
- That protocol is often avoided with pure Ethernet adapters, in
- favor of simpler vendor-specific hardware, but is widely
- supported by firmware for smart network devices.
-
- - On hardware can't implement that protocol, a simple CDC subset
- is used, placing fewer demands on USB.
-
- - CDC Ethernet Emulation Model (EEM) is a newer standard that has
- a simpler interface that can be used by more USB hardware.
-
- RNDIS support is an additional option, more demanding than than
- subset.
-
- Within the USB device, this gadget driver exposes a network device
- "usbX", where X depends on what other networking devices you have.
- Treat it like a two-node Ethernet link: host, and gadget.
-
- The Linux-USB host-side "usbnet" driver interoperates with this
- driver, so that deep I/O queues can be supported. On 2.4 kernels,
- use "CDCEther" instead, if you're using the CDC option. That CDC
- mode should also interoperate with standard CDC Ethernet class
- drivers on other host operating systems.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_ether".
-
-config USB_ETH_RNDIS
- bool "RNDIS support"
- depends on USB_ETH
- select USB_LIBCOMPOSITE
- select USB_F_RNDIS
- default y
- help
- Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
- and Microsoft provides redistributable binary RNDIS drivers for
- older versions of Windows.
-
- If you say "y" here, the Ethernet gadget driver will try to provide
- a second device configuration, supporting RNDIS to talk to such
- Microsoft USB hosts.
-
- To make MS-Windows work with this, use Documentation/usb/linux.inf
- as the "driver info file". For versions of MS-Windows older than
- XP, you'll need to download drivers from Microsoft's website; a URL
- is given in comments found in that info file.
-
-config USB_ETH_EEM
- bool "Ethernet Emulation Model (EEM) support"
- depends on USB_ETH
- select USB_LIBCOMPOSITE
- select USB_F_EEM
- default n
- help
- CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
- and therefore can be supported by more hardware. Technically ECM and
- EEM are designed for different applications. The ECM model extends
- the network interface to the target (e.g. a USB cable modem), and the
- EEM model is for mobile devices to communicate with hosts using
- ethernet over USB. For Linux gadgets, however, the interface with
- the host is the same (a usbX device), so the differences are minimal.
-
- If you say "y" here, the Ethernet gadget driver will use the EEM
- protocol rather than ECM. If unsure, say "n".
-
-config USB_G_NCM
- tristate "Network Control Model (NCM) support"
- depends on NET
- select USB_LIBCOMPOSITE
- select USB_U_ETHER
- select USB_F_NCM
- select CRC32
- help
- This driver implements USB CDC NCM subclass standard. NCM is
- an advanced protocol for Ethernet encapsulation, allows grouping
- of several ethernet frames into one USB transfer and different
- alignment possibilities.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_ncm".
-
-config USB_GADGETFS
- tristate "Gadget Filesystem"
- help
- This driver provides a filesystem based API that lets user mode
- programs implement a single-configuration USB device, including
- endpoint I/O and control requests that don't relate to enumeration.
- All endpoints, transfer speeds, and transfer types supported by
- the hardware are available, through read() and write() calls.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "gadgetfs".
-
-config USB_FUNCTIONFS
- tristate "Function Filesystem"
- select USB_LIBCOMPOSITE
- select USB_F_FS
- select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
- help
- The Function Filesystem (FunctionFS) lets one create USB
- composite functions in user space in the same way GadgetFS
- lets one create USB gadgets in user space. This allows creation
- of composite gadgets such that some of the functions are
- implemented in kernel space (for instance Ethernet, serial or
- mass storage) and other are implemented in user space.
-
- If you say "y" or "m" here you will be able what kind of
- configurations the gadget will provide.
-
- Say "y" to link the driver statically, or "m" to build
- a dynamically linked module called "g_ffs".
-
-config USB_FUNCTIONFS_ETH
- bool "Include configuration with CDC ECM (Ethernet)"
- depends on USB_FUNCTIONFS && NET
- select USB_U_ETHER
- select USB_F_ECM
- select USB_F_SUBSET
- help
- Include a configuration with CDC ECM function (Ethernet) and the
- Function Filesystem.
-
-config USB_FUNCTIONFS_RNDIS
- bool "Include configuration with RNDIS (Ethernet)"
- depends on USB_FUNCTIONFS && NET
- select USB_U_ETHER
- select USB_F_RNDIS
- help
- Include a configuration with RNDIS function (Ethernet) and the Filesystem.
-
-config USB_FUNCTIONFS_GENERIC
- bool "Include 'pure' configuration"
- depends on USB_FUNCTIONFS
- help
- Include a configuration with the Function Filesystem alone with
- no Ethernet interface.
-
-config USB_MASS_STORAGE
- tristate "Mass Storage Gadget"
- depends on BLOCK
- select USB_LIBCOMPOSITE
- select USB_F_MASS_STORAGE
- help
- The Mass Storage Gadget acts as a USB Mass Storage disk drive.
- As its storage repository it can use a regular file or a block
- device (in much the same way as the "loop" device driver),
- specified as a module parameter or sysfs option.
-
- This driver is a replacement for now removed File-backed
- Storage Gadget (g_file_storage).
-
- Say "y" to link the driver statically, or "m" to build
- a dynamically linked module called "g_mass_storage".
-
-config USB_GADGET_TARGET
- tristate "USB Gadget Target Fabric Module"
- depends on TARGET_CORE
- select USB_LIBCOMPOSITE
- help
- This fabric is an USB gadget. Two USB protocols are supported that is
- BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
- advertised on alternative interface 0 (primary) and UAS is on
- alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
- UAS utilizes the USB 3.0 feature called streams support.
-
-config USB_G_SERIAL
- tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
- depends on TTY
- select USB_U_SERIAL
- select USB_F_ACM
- select USB_F_SERIAL
- select USB_F_OBEX
- select USB_LIBCOMPOSITE
- help
- The Serial Gadget talks to the Linux-USB generic serial driver.
- This driver supports a CDC-ACM module option, which can be used
- to interoperate with MS-Windows hosts or with the Linux-USB
- "cdc-acm" driver.
-
- This driver also supports a CDC-OBEX option. You will need a
- user space OBEX server talking to /dev/ttyGS*, since the kernel
- itself doesn't implement the OBEX protocol.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_serial".
-
- For more information, see Documentation/usb/gadget_serial.txt
- which includes instructions and a "driver info file" needed to
- make MS-Windows work with CDC ACM.
-
-config USB_MIDI_GADGET
- tristate "MIDI Gadget"
- depends on SND
- select USB_LIBCOMPOSITE
- select SND_RAWMIDI
- help
- The MIDI Gadget acts as a USB Audio device, with one MIDI
- input and one MIDI output. These MIDI jacks appear as
- a sound "card" in the ALSA sound system. Other MIDI
- connections can then be made on the gadget system, using
- ALSA's aconnect utility etc.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_midi".
-
-config USB_G_PRINTER
- tristate "Printer Gadget"
- select USB_LIBCOMPOSITE
- help
- The Printer Gadget channels data between the USB host and a
- userspace program driving the print engine. The user space
- program reads and writes the device file /dev/g_printer to
- receive or send printer data. It can use ioctl calls to
- the device file to get or set printer status.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_printer".
-
- For more information, see Documentation/usb/gadget_printer.txt
- which includes sample code for accessing the device file.
-
-if TTY
-
-config USB_CDC_COMPOSITE
- tristate "CDC Composite Device (Ethernet and ACM)"
- depends on NET
- select USB_LIBCOMPOSITE
- select USB_U_SERIAL
- select USB_U_ETHER
- select USB_F_ACM
- select USB_F_ECM
- help
- This driver provides two functions in one configuration:
- a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
-
- This driver requires four bulk and two interrupt endpoints,
- plus the ability to handle altsettings. Not all peripheral
- controllers are that capable.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module.
-
-config USB_G_NOKIA
- tristate "Nokia composite gadget"
- depends on PHONET
- select USB_LIBCOMPOSITE
- select USB_U_SERIAL
- select USB_U_ETHER
- select USB_F_ACM
- select USB_F_OBEX
- select USB_F_PHONET
- select USB_F_ECM
- help
- The Nokia composite gadget provides support for acm, obex
- and phonet in only one composite gadget driver.
-
- It's only really useful for N900 hardware. If you're building
- a kernel for N900, say Y or M here. If unsure, say N.
-
-config USB_G_ACM_MS
- tristate "CDC Composite Device (ACM and mass storage)"
- depends on BLOCK
- select USB_LIBCOMPOSITE
- select USB_U_SERIAL
- select USB_F_ACM
- select USB_F_MASS_STORAGE
- help
- This driver provides two functions in one configuration:
- a mass storage, and a CDC ACM (serial port) link.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_acm_ms".
-
-config USB_G_MULTI
- tristate "Multifunction Composite Gadget"
- depends on BLOCK && NET
- select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
- select USB_LIBCOMPOSITE
- select USB_U_SERIAL
- select USB_U_ETHER
- select USB_F_ACM
- select USB_F_MASS_STORAGE
- help
- The Multifunction Composite Gadget provides Ethernet (RNDIS
- and/or CDC Ethernet), mass storage and ACM serial link
- interfaces.
-
- You will be asked to choose which of the two configurations is
- to be available in the gadget. At least one configuration must
- be chosen to make the gadget usable. Selecting more than one
- configuration will prevent Windows from automatically detecting
- the gadget as a composite gadget, so an INF file will be needed to
- use the gadget.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_multi".
-
-config USB_G_MULTI_RNDIS
- bool "RNDIS + CDC Serial + Storage configuration"
- depends on USB_G_MULTI
- select USB_F_RNDIS
- default y
- help
- This option enables a configuration with RNDIS, CDC Serial and
- Mass Storage functions available in the Multifunction Composite
- Gadget. This is the configuration dedicated for Windows since RNDIS
- is Microsoft's protocol.
-
- If unsure, say "y".
-
-config USB_G_MULTI_CDC
- bool "CDC Ethernet + CDC Serial + Storage configuration"
- depends on USB_G_MULTI
- default n
- select USB_F_ECM
- help
- This option enables a configuration with CDC Ethernet (ECM), CDC
- Serial and Mass Storage functions available in the Multifunction
- Composite Gadget.
-
- If unsure, say "y".
-
-endif # TTY
-
-config USB_G_HID
- tristate "HID Gadget"
- select USB_LIBCOMPOSITE
- help
- The HID gadget driver provides generic emulation of USB
- Human Interface Devices (HID).
-
- For more information, see Documentation/usb/gadget_hid.txt which
- includes sample code for accessing the device files.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_hid".
-
-# Standalone / single function gadgets
-config USB_G_DBGP
- tristate "EHCI Debug Device Gadget"
- depends on TTY
- select USB_LIBCOMPOSITE
- help
- This gadget emulates an EHCI Debug device. This is useful when you want
- to interact with an EHCI Debug Port.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_dbgp".
-
-if USB_G_DBGP
-choice
- prompt "EHCI Debug Device mode"
- default USB_G_DBGP_SERIAL
-
-config USB_G_DBGP_PRINTK
- depends on USB_G_DBGP
- bool "printk"
- help
- Directly printk() received data. No interaction.
-
-config USB_G_DBGP_SERIAL
- depends on USB_G_DBGP
- select USB_U_SERIAL
- bool "serial"
- help
- Userland can interact using /dev/ttyGSxxx.
-endchoice
-endif
-
-# put drivers that need isochronous transfer support (for audio
-# or video class gadget drivers), or specific hardware, here.
-config USB_G_WEBCAM
- tristate "USB Webcam Gadget"
- depends on VIDEO_DEV
- select USB_LIBCOMPOSITE
- select VIDEOBUF2_VMALLOC
- help
- The Webcam Gadget acts as a composite USB Audio and Video Class
- device. It provides a userspace API to process UVC control requests
- and stream video data to the host.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "g_webcam".
+source "drivers/usb/gadget/legacy/Kconfig"
endchoice
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 5f150bc..81e82e9 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -1,10 +1,11 @@
#
# USB peripheral controller drivers
#
-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
-ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG
+subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
+subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG
obj-$(CONFIG_USB_GADGET) += udc-core.o
+obj-$(CONFIG_USB_GADGET) += legacy/
obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o
libcomposite-y := usbstring.o config.o epautoconf.o
libcomposite-y += composite.o functions.o configfs.o u_f.o
@@ -64,43 +65,3 @@ usb_f_mass_storage-y := f_mass_storage.o storage_common.o
obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o
usb_f_fs-y := f_fs.o
obj-$(CONFIG_USB_F_FS) += usb_f_fs.o
-
-#
-# USB gadget drivers
-#
-g_zero-y := zero.o
-g_audio-y := audio.o
-g_ether-y := ether.o
-g_serial-y := serial.o
-g_midi-y := gmidi.o
-gadgetfs-y := inode.o
-g_mass_storage-y := mass_storage.o
-g_printer-y := printer.o
-g_cdc-y := cdc2.o
-g_multi-y := multi.o
-g_hid-y := hid.o
-g_dbgp-y := dbgp.o
-g_nokia-y := nokia.o
-g_webcam-y := webcam.o
-g_ncm-y := ncm.o
-g_acm_ms-y := acm_ms.o
-g_tcm_usb_gadget-y := tcm_usb_gadget.o
-
-obj-$(CONFIG_USB_ZERO) += g_zero.o
-obj-$(CONFIG_USB_AUDIO) += g_audio.o
-obj-$(CONFIG_USB_ETH) += g_ether.o
-obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
-obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o
-obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o
-obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
-obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
-obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
-obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
-obj-$(CONFIG_USB_G_HID) += g_hid.o
-obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o
-obj-$(CONFIG_USB_G_MULTI) += g_multi.o
-obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o
-obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
-obj-$(CONFIG_USB_G_NCM) += g_ncm.o
-obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
-obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
new file mode 100644
index 0000000..aa376f0
--- /dev/null
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -0,0 +1,475 @@
+#
+# USB Gadget support on a system involves
+# (a) a peripheral controller, and
+# (b) the gadget driver using it.
+#
+# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+# - Some systems have both kinds of controllers.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+
+config USB_ZERO
+ tristate "Gadget Zero (DEVELOPMENT)"
+ select USB_LIBCOMPOSITE
+ select USB_F_SS_LB
+ help
+ Gadget Zero is a two-configuration device. It either sinks and
+ sources bulk data; or it loops back a configurable number of
+ transfers. It also implements control requests, for "chapter 9"
+ conformance. The driver needs only two bulk-capable endpoints, so
+ it can work on top of most device-side usb controllers. It's
+ useful for testing, and is also a working example showing how
+ USB "gadget drivers" can be written.
+
+ Make this be the first driver you try using on top of any new
+ USB peripheral controller driver. Then you can use host-side
+ test software, like the "usbtest" driver, to put your hardware
+ and its driver through a basic set of functional tests.
+
+ Gadget Zero also works with the host-side "usb-skeleton" driver,
+ and with many kinds of host-side test software. You may need
+ to tweak product and vendor IDs before host software knows about
+ this device, and arrange to select an appropriate configuration.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_zero".
+
+config USB_ZERO_HNPTEST
+ boolean "HNP Test Device"
+ depends on USB_ZERO && USB_OTG
+ help
+ You can configure this device to enumerate using the device
+ identifiers of the USB-OTG test device. That means that when
+ this gadget connects to another OTG device, with this one using
+ the "B-Peripheral" role, that device will use HNP to let this
+ one serve as the USB host instead (in the "B-Host" role).
+
+config USB_AUDIO
+ tristate "Audio Gadget"
+ depends on SND
+ select USB_LIBCOMPOSITE
+ select SND_PCM
+ help
+ This Gadget Audio driver is compatible with USB Audio Class
+ specification 2.0. It implements 1 AudioControl interface,
+ 1 AudioStreaming Interface each for USB-OUT and USB-IN.
+ Number of channels, sample rate and sample size can be
+ specified as module parameters.
+ This driver doesn't expect any real Audio codec to be present
+ on the device - the audio streams are simply sinked to and
+ sourced from a virtual ALSA sound card created. The user-space
+ application may choose to do whatever it wants with the data
+ received from the USB Host and choose to provide whatever it
+ wants as audio data to the USB Host.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_audio".
+
+config GADGET_UAC1
+ bool "UAC 1.0 (Legacy)"
+ depends on USB_AUDIO
+ help
+ If you instead want older UAC Spec-1.0 driver that also has audio
+ paths hardwired to the Audio codec chip on-board and doesn't work
+ without one.
+
+config USB_ETH
+ tristate "Ethernet Gadget (with CDC Ethernet support)"
+ depends on NET
+ select USB_LIBCOMPOSITE
+ select USB_U_ETHER
+ select USB_F_ECM
+ select USB_F_SUBSET
+ select CRC32
+ help
+ This driver implements Ethernet style communication, in one of
+ several ways:
+
+ - The "Communication Device Class" (CDC) Ethernet Control Model.
+ That protocol is often avoided with pure Ethernet adapters, in
+ favor of simpler vendor-specific hardware, but is widely
+ supported by firmware for smart network devices.
+
+ - On hardware can't implement that protocol, a simple CDC subset
+ is used, placing fewer demands on USB.
+
+ - CDC Ethernet Emulation Model (EEM) is a newer standard that has
+ a simpler interface that can be used by more USB hardware.
+
+ RNDIS support is an additional option, more demanding than than
+ subset.
+
+ Within the USB device, this gadget driver exposes a network device
+ "usbX", where X depends on what other networking devices you have.
+ Treat it like a two-node Ethernet link: host, and gadget.
+
+ The Linux-USB host-side "usbnet" driver interoperates with this
+ driver, so that deep I/O queues can be supported. On 2.4 kernels,
+ use "CDCEther" instead, if you're using the CDC option. That CDC
+ mode should also interoperate with standard CDC Ethernet class
+ drivers on other host operating systems.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_ether".
+
+config USB_ETH_RNDIS
+ bool "RNDIS support"
+ depends on USB_ETH
+ select USB_LIBCOMPOSITE
+ select USB_F_RNDIS
+ default y
+ help
+ Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
+ and Microsoft provides redistributable binary RNDIS drivers for
+ older versions of Windows.
+
+ If you say "y" here, the Ethernet gadget driver will try to provide
+ a second device configuration, supporting RNDIS to talk to such
+ Microsoft USB hosts.
+
+ To make MS-Windows work with this, use Documentation/usb/linux.inf
+ as the "driver info file". For versions of MS-Windows older than
+ XP, you'll need to download drivers from Microsoft's website; a URL
+ is given in comments found in that info file.
+
+config USB_ETH_EEM
+ bool "Ethernet Emulation Model (EEM) support"
+ depends on USB_ETH
+ select USB_LIBCOMPOSITE
+ select USB_F_EEM
+ default n
+ help
+ CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+ and therefore can be supported by more hardware. Technically ECM and
+ EEM are designed for different applications. The ECM model extends
+ the network interface to the target (e.g. a USB cable modem), and the
+ EEM model is for mobile devices to communicate with hosts using
+ ethernet over USB. For Linux gadgets, however, the interface with
+ the host is the same (a usbX device), so the differences are minimal.
+
+ If you say "y" here, the Ethernet gadget driver will use the EEM
+ protocol rather than ECM. If unsure, say "n".
+
+config USB_G_NCM
+ tristate "Network Control Model (NCM) support"
+ depends on NET
+ select USB_LIBCOMPOSITE
+ select USB_U_ETHER
+ select USB_F_NCM
+ select CRC32
+ help
+ This driver implements USB CDC NCM subclass standard. NCM is
+ an advanced protocol for Ethernet encapsulation, allows grouping
+ of several ethernet frames into one USB transfer and different
+ alignment possibilities.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_ncm".
+
+config USB_GADGETFS
+ tristate "Gadget Filesystem"
+ help
+ This driver provides a filesystem based API that lets user mode
+ programs implement a single-configuration USB device, including
+ endpoint I/O and control requests that don't relate to enumeration.
+ All endpoints, transfer speeds, and transfer types supported by
+ the hardware are available, through read() and write() calls.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "gadgetfs".
+
+config USB_FUNCTIONFS
+ tristate "Function Filesystem"
+ select USB_LIBCOMPOSITE
+ select USB_F_FS
+ select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
+ help
+ The Function Filesystem (FunctionFS) lets one create USB
+ composite functions in user space in the same way GadgetFS
+ lets one create USB gadgets in user space. This allows creation
+ of composite gadgets such that some of the functions are
+ implemented in kernel space (for instance Ethernet, serial or
+ mass storage) and other are implemented in user space.
+
+ If you say "y" or "m" here you will be able what kind of
+ configurations the gadget will provide.
+
+ Say "y" to link the driver statically, or "m" to build
+ a dynamically linked module called "g_ffs".
+
+config USB_FUNCTIONFS_ETH
+ bool "Include configuration with CDC ECM (Ethernet)"
+ depends on USB_FUNCTIONFS && NET
+ select USB_U_ETHER
+ select USB_F_ECM
+ select USB_F_SUBSET
+ help
+ Include a configuration with CDC ECM function (Ethernet) and the
+ Function Filesystem.
+
+config USB_FUNCTIONFS_RNDIS
+ bool "Include configuration with RNDIS (Ethernet)"
+ depends on USB_FUNCTIONFS && NET
+ select USB_U_ETHER
+ select USB_F_RNDIS
+ help
+ Include a configuration with RNDIS function (Ethernet) and the Filesystem.
+
+config USB_FUNCTIONFS_GENERIC
+ bool "Include 'pure' configuration"
+ depends on USB_FUNCTIONFS
+ help
+ Include a configuration with the Function Filesystem alone with
+ no Ethernet interface.
+
+config USB_MASS_STORAGE
+ tristate "Mass Storage Gadget"
+ depends on BLOCK
+ select USB_LIBCOMPOSITE
+ select USB_F_MASS_STORAGE
+ help
+ The Mass Storage Gadget acts as a USB Mass Storage disk drive.
+ As its storage repository it can use a regular file or a block
+ device (in much the same way as the "loop" device driver),
+ specified as a module parameter or sysfs option.
+
+ This driver is a replacement for now removed File-backed
+ Storage Gadget (g_file_storage).
+
+ Say "y" to link the driver statically, or "m" to build
+ a dynamically linked module called "g_mass_storage".
+
+config USB_GADGET_TARGET
+ tristate "USB Gadget Target Fabric Module"
+ depends on TARGET_CORE
+ select USB_LIBCOMPOSITE
+ help
+ This fabric is an USB gadget. Two USB protocols are supported that is
+ BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
+ advertised on alternative interface 0 (primary) and UAS is on
+ alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
+ UAS utilizes the USB 3.0 feature called streams support.
+
+config USB_G_SERIAL
+ tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
+ depends on TTY
+ select USB_U_SERIAL
+ select USB_F_ACM
+ select USB_F_SERIAL
+ select USB_F_OBEX
+ select USB_LIBCOMPOSITE
+ help
+ The Serial Gadget talks to the Linux-USB generic serial driver.
+ This driver supports a CDC-ACM module option, which can be used
+ to interoperate with MS-Windows hosts or with the Linux-USB
+ "cdc-acm" driver.
+
+ This driver also supports a CDC-OBEX option. You will need a
+ user space OBEX server talking to /dev/ttyGS*, since the kernel
+ itself doesn't implement the OBEX protocol.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_serial".
+
+ For more information, see Documentation/usb/gadget_serial.txt
+ which includes instructions and a "driver info file" needed to
+ make MS-Windows work with CDC ACM.
+
+config USB_MIDI_GADGET
+ tristate "MIDI Gadget"
+ depends on SND
+ select USB_LIBCOMPOSITE
+ select SND_RAWMIDI
+ help
+ The MIDI Gadget acts as a USB Audio device, with one MIDI
+ input and one MIDI output. These MIDI jacks appear as
+ a sound "card" in the ALSA sound system. Other MIDI
+ connections can then be made on the gadget system, using
+ ALSA's aconnect utility etc.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_midi".
+
+config USB_G_PRINTER
+ tristate "Printer Gadget"
+ select USB_LIBCOMPOSITE
+ help
+ The Printer Gadget channels data between the USB host and a
+ userspace program driving the print engine. The user space
+ program reads and writes the device file /dev/g_printer to
+ receive or send printer data. It can use ioctl calls to
+ the device file to get or set printer status.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_printer".
+
+ For more information, see Documentation/usb/gadget_printer.txt
+ which includes sample code for accessing the device file.
+
+if TTY
+
+config USB_CDC_COMPOSITE
+ tristate "CDC Composite Device (Ethernet and ACM)"
+ depends on NET
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_U_ETHER
+ select USB_F_ACM
+ select USB_F_ECM
+ help
+ This driver provides two functions in one configuration:
+ a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
+
+ This driver requires four bulk and two interrupt endpoints,
+ plus the ability to handle altsettings. Not all peripheral
+ controllers are that capable.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module.
+
+config USB_G_NOKIA
+ tristate "Nokia composite gadget"
+ depends on PHONET
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_U_ETHER
+ select USB_F_ACM
+ select USB_F_OBEX
+ select USB_F_PHONET
+ select USB_F_ECM
+ help
+ The Nokia composite gadget provides support for acm, obex
+ and phonet in only one composite gadget driver.
+
+ It's only really useful for N900 hardware. If you're building
+ a kernel for N900, say Y or M here. If unsure, say N.
+
+config USB_G_ACM_MS
+ tristate "CDC Composite Device (ACM and mass storage)"
+ depends on BLOCK
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_F_ACM
+ select USB_F_MASS_STORAGE
+ help
+ This driver provides two functions in one configuration:
+ a mass storage, and a CDC ACM (serial port) link.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_acm_ms".
+
+config USB_G_MULTI
+ tristate "Multifunction Composite Gadget"
+ depends on BLOCK && NET
+ select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_U_ETHER
+ select USB_F_ACM
+ select USB_F_MASS_STORAGE
+ help
+ The Multifunction Composite Gadget provides Ethernet (RNDIS
+ and/or CDC Ethernet), mass storage and ACM serial link
+ interfaces.
+
+ You will be asked to choose which of the two configurations is
+ to be available in the gadget. At least one configuration must
+ be chosen to make the gadget usable. Selecting more than one
+ configuration will prevent Windows from automatically detecting
+ the gadget as a composite gadget, so an INF file will be needed to
+ use the gadget.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_multi".
+
+config USB_G_MULTI_RNDIS
+ bool "RNDIS + CDC Serial + Storage configuration"
+ depends on USB_G_MULTI
+ select USB_F_RNDIS
+ default y
+ help
+ This option enables a configuration with RNDIS, CDC Serial and
+ Mass Storage functions available in the Multifunction Composite
+ Gadget. This is the configuration dedicated for Windows since RNDIS
+ is Microsoft's protocol.
+
+ If unsure, say "y".
+
+config USB_G_MULTI_CDC
+ bool "CDC Ethernet + CDC Serial + Storage configuration"
+ depends on USB_G_MULTI
+ default n
+ select USB_F_ECM
+ help
+ This option enables a configuration with CDC Ethernet (ECM), CDC
+ Serial and Mass Storage functions available in the Multifunction
+ Composite Gadget.
+
+ If unsure, say "y".
+
+endif # TTY
+
+config USB_G_HID
+ tristate "HID Gadget"
+ select USB_LIBCOMPOSITE
+ help
+ The HID gadget driver provides generic emulation of USB
+ Human Interface Devices (HID).
+
+ For more information, see Documentation/usb/gadget_hid.txt which
+ includes sample code for accessing the device files.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_hid".
+
+# Standalone / single function gadgets
+config USB_G_DBGP
+ tristate "EHCI Debug Device Gadget"
+ depends on TTY
+ select USB_LIBCOMPOSITE
+ help
+ This gadget emulates an EHCI Debug device. This is useful when you want
+ to interact with an EHCI Debug Port.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_dbgp".
+
+if USB_G_DBGP
+choice
+ prompt "EHCI Debug Device mode"
+ default USB_G_DBGP_SERIAL
+
+config USB_G_DBGP_PRINTK
+ depends on USB_G_DBGP
+ bool "printk"
+ help
+ Directly printk() received data. No interaction.
+
+config USB_G_DBGP_SERIAL
+ depends on USB_G_DBGP
+ select USB_U_SERIAL
+ bool "serial"
+ help
+ Userland can interact using /dev/ttyGSxxx.
+endchoice
+endif
+
+# put drivers that need isochronous transfer support (for audio
+# or video class gadget drivers), or specific hardware, here.
+config USB_G_WEBCAM
+ tristate "USB Webcam Gadget"
+ depends on VIDEO_DEV
+ select USB_LIBCOMPOSITE
+ select VIDEOBUF2_VMALLOC
+ help
+ The Webcam Gadget acts as a composite USB Audio and Video Class
+ device. It provides a userspace API to process UVC control requests
+ and stream video data to the host.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_webcam".
diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile
new file mode 100644
index 0000000..fbb32aa
--- /dev/null
+++ b/drivers/usb/gadget/legacy/Makefile
@@ -0,0 +1,42 @@
+#
+# USB gadget drivers
+#
+
+ccflags-y := -I$(PWD)/drivers/usb/gadget/
+
+g_zero-y := zero.o
+g_audio-y := audio.o
+g_ether-y := ether.o
+g_serial-y := serial.o
+g_midi-y := gmidi.o
+gadgetfs-y := inode.o
+g_mass_storage-y := mass_storage.o
+g_printer-y := printer.o
+g_cdc-y := cdc2.o
+g_multi-y := multi.o
+g_hid-y := hid.o
+g_dbgp-y := dbgp.o
+g_nokia-y := nokia.o
+g_webcam-y := webcam.o
+g_ncm-y := ncm.o
+g_acm_ms-y := acm_ms.o
+g_tcm_usb_gadget-y := tcm_usb_gadget.o
+
+obj-$(CONFIG_USB_ZERO) += g_zero.o
+obj-$(CONFIG_USB_AUDIO) += g_audio.o
+obj-$(CONFIG_USB_ETH) += g_ether.o
+obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
+obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o
+obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o
+obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
+obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
+obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
+obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
+obj-$(CONFIG_USB_G_HID) += g_hid.o
+obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o
+obj-$(CONFIG_USB_G_MULTI) += g_multi.o
+obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o
+obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
+obj-$(CONFIG_USB_G_NCM) += g_ncm.o
+obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
+obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c
similarity index 100%
rename from drivers/usb/gadget/acm_ms.c
rename to drivers/usb/gadget/legacy/acm_ms.c
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/legacy/audio.c
similarity index 100%
rename from drivers/usb/gadget/audio.c
rename to drivers/usb/gadget/legacy/audio.c
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c
similarity index 100%
rename from drivers/usb/gadget/cdc2.c
rename to drivers/usb/gadget/legacy/cdc2.c
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
similarity index 100%
rename from drivers/usb/gadget/dbgp.c
rename to drivers/usb/gadget/legacy/dbgp.c
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/legacy/ether.c
similarity index 100%
rename from drivers/usb/gadget/ether.c
rename to drivers/usb/gadget/legacy/ether.c
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c
similarity index 100%
rename from drivers/usb/gadget/g_ffs.c
rename to drivers/usb/gadget/legacy/g_ffs.c
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c
similarity index 100%
rename from drivers/usb/gadget/gmidi.c
rename to drivers/usb/gadget/legacy/gmidi.c
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/legacy/hid.c
similarity index 100%
rename from drivers/usb/gadget/hid.c
rename to drivers/usb/gadget/legacy/hid.c
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/legacy/inode.c
similarity index 100%
rename from drivers/usb/gadget/inode.c
rename to drivers/usb/gadget/legacy/inode.c
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c
similarity index 100%
rename from drivers/usb/gadget/mass_storage.c
rename to drivers/usb/gadget/legacy/mass_storage.c
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/legacy/multi.c
similarity index 100%
rename from drivers/usb/gadget/multi.c
rename to drivers/usb/gadget/legacy/multi.c
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/legacy/ncm.c
similarity index 100%
rename from drivers/usb/gadget/ncm.c
rename to drivers/usb/gadget/legacy/ncm.c
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/legacy/nokia.c
similarity index 100%
rename from drivers/usb/gadget/nokia.c
rename to drivers/usb/gadget/legacy/nokia.c
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/legacy/printer.c
similarity index 100%
rename from drivers/usb/gadget/printer.c
rename to drivers/usb/gadget/legacy/printer.c
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/legacy/serial.c
similarity index 100%
rename from drivers/usb/gadget/serial.c
rename to drivers/usb/gadget/legacy/serial.c
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/legacy/tcm_usb_gadget.c
similarity index 100%
rename from drivers/usb/gadget/tcm_usb_gadget.c
rename to drivers/usb/gadget/legacy/tcm_usb_gadget.c
diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/legacy/tcm_usb_gadget.h
similarity index 100%
rename from drivers/usb/gadget/tcm_usb_gadget.h
rename to drivers/usb/gadget/legacy/tcm_usb_gadget.h
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/legacy/webcam.c
similarity index 100%
rename from drivers/usb/gadget/webcam.c
rename to drivers/usb/gadget/legacy/webcam.c
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/legacy/zero.c
similarity index 100%
rename from drivers/usb/gadget/zero.c
rename to drivers/usb/gadget/legacy/zero.c
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
