Re: problem with resume after s2ram

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 28 2014, Alan Stern wrote:

> That's interesting.  Here's another test you should try with that same
> kernel.  Start moving the mouse before you wake up the system, and keep
> moving it until the system has fully resumed.  When you do this, does
> it work right?  That is, when the screen turns back on, do you see the
> mouse cursor moving around?

Yes, it works.


> Below is the next patch in the series, diag6.  This adds back more 
> material that was removeed in diag5.  My guess is that this one will 
> cause your system to crash during resume.

No, it does not crash. Please find attached the log. There are 2
s2ram-wakeup cycles, first wakeup with keyboard and second with
power-button. During both wakeups I've moved the mouse.

-- 
           Peter
2014-04-29T11:26:02.267472+02:00 micropit kernel: [  174.451250] PM: Syncing filesystems ... done.
2014-04-29T11:26:02.267520+02:00 micropit kernel: [  174.614390] PM: Preparing system for mem sleep
2014-04-29T11:26:02.320493+02:00 micropit kernel: [  174.666627] ohci-pci 0000:00:12.1: Dequeue: ffff8801294c6680 count 1
2014-04-29T11:26:02.320533+02:00 micropit kernel: [  174.667577] ohci-pci 0000:00:12.1: IRQ: count 1 intr-en 8000005e intr-stat 24 frame a5e4
2014-04-29T11:26:02.320547+02:00 micropit kernel: [  174.667637] ohci-pci 0000:00:12.1: Giveback: ffff8801294c6680 count 1
2014-04-29T11:26:24.703742+02:00 micropit kernel: [  174.693123] Freezing user space processes ... (elapsed 0.001 seconds) done.
2014-04-29T11:26:24.703764+02:00 micropit kernel: [  174.694873] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
2014-04-29T11:26:24.703765+02:00 micropit kernel: [  174.696288] PM: Entering mem sleep
2014-04-29T11:26:24.703766+02:00 micropit kernel: [  174.697067] usb 3-2: usb suspend, wakeup 0
2014-04-29T11:26:24.703766+02:00 micropit kernel: [  174.697079] usb 4-3: usb suspend, wakeup 0
2014-04-29T11:26:24.703767+02:00 micropit kernel: [  174.697113] ohci-pci 0000:00:12.1: Dequeue: ffff8801242568c0 count 1
2014-04-29T11:26:24.703768+02:00 micropit kernel: [  174.697177] usb 2-3: usb suspend, wakeup 0
2014-04-29T11:26:24.703769+02:00 micropit kernel: [  174.697248] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
2014-04-29T11:26:24.703769+02:00 micropit kernel: [  174.697319] sd 0:0:0:0: [sda] Synchronizing SCSI cache
2014-04-29T11:26:24.703770+02:00 micropit kernel: [  174.697375] usb usb7: usb auto-resume
2014-04-29T11:26:24.703771+02:00 micropit kernel: [  174.697384] ohci-pci 0000:00:14.5: resume root hub
2014-04-29T11:26:24.703771+02:00 micropit kernel: [  174.697398] usb 1-4: usb suspend, wakeup 0
2014-04-29T11:26:24.703772+02:00 micropit kernel: [  174.697425] usb usb6: usb auto-resume
2014-04-29T11:26:24.703773+02:00 micropit kernel: [  174.697432] ohci-pci 0000:00:13.1: resume root hub
2014-04-29T11:26:24.703774+02:00 micropit kernel: [  174.697524] ohci-pci 0000:00:12.1: IRQ: count 1 intr-en 8000005e intr-stat 24 frame a602
2014-04-29T11:26:24.703775+02:00 micropit kernel: [  174.697528] usb usb5: usb auto-resume
2014-04-29T11:26:24.703775+02:00 micropit kernel: [  174.697537] ohci-pci 0000:00:13.0: resume root hub
2014-04-29T11:26:24.703776+02:00 micropit kernel: [  174.697843] ohci-pci 0000:00:12.1: Giveback: ffff8801242568c0 count 1
2014-04-29T11:26:24.703777+02:00 micropit kernel: [  174.698201] sd 0:0:0:0: [sda] Stopping disk
2014-04-29T11:26:24.703778+02:00 micropit kernel: [  174.698548] usb 4-2: usb suspend, wakeup 1
2014-04-29T11:26:24.703778+02:00 micropit kernel: [  174.698622] hub 3-0:1.0: hub_suspend
2014-04-29T11:26:24.703779+02:00 micropit kernel: [  174.698694] hub 2-0:1.0: hub_suspend
2014-04-29T11:26:24.703780+02:00 micropit kernel: [  174.698698] usb usb3: bus suspend, wakeup 0
2014-04-29T11:26:24.703781+02:00 micropit kernel: [  174.698705] ohci-pci 0000:00:12.0: suspend root hub
2014-04-29T11:26:24.703781+02:00 micropit kernel: [  174.698727] hub 1-0:1.0: hub_suspend
2014-04-29T11:26:24.703782+02:00 micropit kernel: [  174.698744] usb usb1: bus suspend, wakeup 0
2014-04-29T11:26:24.703783+02:00 micropit kernel: [  174.698748] ehci-pci 0000:00:12.2: suspend root hub
2014-04-29T11:26:24.703783+02:00 micropit kernel: [  174.698812] usb usb2: bus suspend, wakeup 0
2014-04-29T11:26:24.703784+02:00 micropit kernel: [  174.698836] ehci-pci 0000:00:13.2: suspend root hub
2014-04-29T11:26:24.703785+02:00 micropit kernel: [  174.698978] hub 4-0:1.0: hub_suspend
2014-04-29T11:26:24.703786+02:00 micropit kernel: [  174.699014] usb usb4: bus suspend, wakeup 0
2014-04-29T11:26:24.703786+02:00 micropit kernel: [  174.699035] ohci-pci 0000:00:12.1: suspend root hub
2014-04-29T11:26:24.703787+02:00 micropit kernel: [  174.699079] nouveau  [     DRM] suspending fbcon...
2014-04-29T11:26:24.703788+02:00 micropit kernel: [  174.699102] nouveau  [     DRM] suspending display...
2014-04-29T11:26:24.703788+02:00 micropit kernel: [  174.699117] nouveau  [     DRM] unpinning framebuffer(s)...
2014-04-29T11:26:24.703789+02:00 micropit kernel: [  174.699146] nouveau  [     DRM] evicting buffers...
2014-04-29T11:26:24.703790+02:00 micropit kernel: [  174.701283] sd 2:0:0:0: [sdb] Stopping disk
2014-04-29T11:26:24.703791+02:00 micropit kernel: [  174.742184] nouveau  [     DRM] waiting for kernel channels to go idle...
2014-04-29T11:26:24.703792+02:00 micropit kernel: [  174.742198] nouveau  [     DRM] suspending client object trees...
2014-04-29T11:26:24.703792+02:00 micropit kernel: [  174.742276] nouveau  [     DRM] suspending kernel object tree...
2014-04-29T11:26:24.703793+02:00 micropit kernel: [  174.745538] hub 6-0:1.0: hub_resume
2014-04-29T11:26:24.703794+02:00 micropit kernel: [  174.745574] hub 7-0:1.0: hub_resume
2014-04-29T11:26:24.703794+02:00 micropit kernel: [  174.745615] hub 6-0:1.0: hub_suspend
2014-04-29T11:26:24.703795+02:00 micropit kernel: [  174.745630] hub 7-0:1.0: hub_suspend
2014-04-29T11:26:24.703796+02:00 micropit kernel: [  174.745636] usb usb6: bus suspend, wakeup 0
2014-04-29T11:26:24.703797+02:00 micropit kernel: [  174.745642] ohci-pci 0000:00:13.1: suspend root hub
2014-04-29T11:26:24.703797+02:00 micropit kernel: [  174.745661] usb usb7: bus suspend, wakeup 0
2014-04-29T11:26:24.703798+02:00 micropit kernel: [  174.745674] ohci-pci 0000:00:14.5: suspend root hub
2014-04-29T11:26:24.703799+02:00 micropit kernel: [  174.746525] hub 5-0:1.0: hub_resume
2014-04-29T11:26:24.703800+02:00 micropit kernel: [  174.746578] hub 5-0:1.0: hub_suspend
2014-04-29T11:26:24.703800+02:00 micropit kernel: [  174.746596] usb usb5: bus suspend, wakeup 0
2014-04-29T11:26:24.703801+02:00 micropit kernel: [  174.746609] ohci-pci 0000:00:13.0: suspend root hub
2014-04-29T11:26:24.703802+02:00 micropit kernel: [  175.578622] PM: suspend of devices complete after 882.707 msecs
2014-04-29T11:26:24.703803+02:00 micropit kernel: [  175.579104] PM: late suspend of devices complete after 0.451 msecs
2014-04-29T11:26:24.703803+02:00 micropit kernel: [  175.579421] r8169 0000:02:00.0: System wakeup enabled by ACPI
2014-04-29T11:26:24.703804+02:00 micropit kernel: [  175.589860] ohci-pci 0000:00:14.5: wakeup: 1
2014-04-29T11:26:24.703805+02:00 micropit kernel: [  175.589913] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
2014-04-29T11:26:24.703806+02:00 micropit kernel: [  175.589926] ohci-pci 0000:00:14.5: --> PCI D0
2014-04-29T11:26:24.703806+02:00 micropit kernel: [  175.590044] ehci-pci 0000:00:13.2: wakeup: 1
2014-04-29T11:26:24.703807+02:00 micropit kernel: [  175.590067] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
2014-04-29T11:26:24.703808+02:00 micropit kernel: [  175.600746] ehci-pci 0000:00:13.2: --> PCI D3hot
2014-04-29T11:26:24.703809+02:00 micropit kernel: [  175.600805] ohci-pci 0000:00:13.1: wakeup: 1
2014-04-29T11:26:24.703809+02:00 micropit kernel: [  175.600838] ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
2014-04-29T11:26:24.703810+02:00 micropit kernel: [  175.600849] ohci-pci 0000:00:13.1: --> PCI D0
2014-04-29T11:26:24.703811+02:00 micropit kernel: [  175.600882] ohci-pci 0000:00:13.0: wakeup: 1
2014-04-29T11:26:24.703812+02:00 micropit kernel: [  175.600900] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
2014-04-29T11:26:24.703812+02:00 micropit kernel: [  175.600912] ohci-pci 0000:00:13.0: --> PCI D0
2014-04-29T11:26:24.703813+02:00 micropit kernel: [  175.600953] ehci-pci 0000:00:12.2: wakeup: 1
2014-04-29T11:26:24.703814+02:00 micropit kernel: [  175.600974] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
2014-04-29T11:26:24.703815+02:00 micropit kernel: [  175.611735] ehci-pci 0000:00:12.2: --> PCI D3hot
2014-04-29T11:26:24.703815+02:00 micropit kernel: [  175.611794] ohci-pci 0000:00:12.1: wakeup: 1
2014-04-29T11:26:24.703816+02:00 micropit kernel: [  175.611827] ohci-pci 0000:00:12.1: System wakeup enabled by ACPI
2014-04-29T11:26:24.703817+02:00 micropit kernel: [  175.611839] ohci-pci 0000:00:12.1: --> PCI D0
2014-04-29T11:26:24.703818+02:00 micropit kernel: [  175.611873] ohci-pci 0000:00:12.0: wakeup: 1
2014-04-29T11:26:24.703819+02:00 micropit kernel: [  175.611891] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
2014-04-29T11:26:24.703819+02:00 micropit kernel: [  175.611902] ohci-pci 0000:00:12.0: --> PCI D0
2014-04-29T11:26:24.703820+02:00 micropit kernel: [  175.612027] PM: noirq suspend of devices complete after 32.936 msecs
2014-04-29T11:26:24.703821+02:00 micropit kernel: [  175.612162] ACPI: Preparing to enter system sleep state S3
2014-04-29T11:26:24.703822+02:00 micropit kernel: [  175.623534] PM: Saving platform NVS memory
2014-04-29T11:26:24.703823+02:00 micropit kernel: [  175.624034] Disabling non-boot CPUs ...
2014-04-29T11:26:24.703823+02:00 micropit kernel: [  175.625917] smpboot: CPU 1 is now offline
2014-04-29T11:26:24.703824+02:00 micropit kernel: [  175.628360] smpboot: CPU 2 is now offline
2014-04-29T11:26:24.703825+02:00 micropit kernel: [  175.630660] smpboot: CPU 3 is now offline
2014-04-29T11:26:24.703826+02:00 micropit kernel: [  175.631788] ACPI: Low-level resume complete
2014-04-29T11:26:24.703827+02:00 micropit kernel: [  175.631838] PM: Restoring platform NVS memory
2014-04-29T11:26:24.703827+02:00 micropit kernel: [  175.631941] PCI-DMA: Resuming GART IOMMU
2014-04-29T11:26:24.703828+02:00 micropit kernel: [  175.631945] PCI-DMA: Restoring GART aperture settings
2014-04-29T11:26:24.703829+02:00 micropit kernel: [  175.632197] microcode: CPU0: new patch_level=0x010000c8
2014-04-29T11:26:24.703830+02:00 micropit kernel: [  175.632201] Enabling non-boot CPUs ...
2014-04-29T11:26:24.703830+02:00 micropit kernel: [  175.632369] smpboot: Booting Node 0 Processor 1 APIC 0x1
2014-04-29T11:26:24.703831+02:00 micropit kernel: [  175.643396] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
2014-04-29T11:26:24.703832+02:00 micropit kernel: [  175.643398] perf: IBS APIC setup failed on cpu #1
2014-04-29T11:26:24.703833+02:00 micropit kernel: [  175.645640] microcode: CPU1: new patch_level=0x010000c8
2014-04-29T11:26:24.703834+02:00 micropit kernel: [  175.645662] CPU1 is up
2014-04-29T11:26:24.703835+02:00 micropit kernel: [  175.645741] smpboot: Booting Node 0 Processor 2 APIC 0x2
2014-04-29T11:26:24.703835+02:00 micropit kernel: [  175.656767] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
2014-04-29T11:26:24.703836+02:00 micropit kernel: [  175.656768] perf: IBS APIC setup failed on cpu #2
2014-04-29T11:26:24.703837+02:00 micropit kernel: [  175.659064] microcode: CPU2: new patch_level=0x010000c8
2014-04-29T11:26:24.703838+02:00 micropit kernel: [  175.659086] CPU2 is up
2014-04-29T11:26:24.703838+02:00 micropit kernel: [  175.659283] smpboot: Booting Node 0 Processor 3 APIC 0x3
2014-04-29T11:26:24.703839+02:00 micropit kernel: [  175.670321] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
2014-04-29T11:26:24.703840+02:00 micropit kernel: [  175.670323] perf: IBS APIC setup failed on cpu #3
2014-04-29T11:26:24.703841+02:00 micropit kernel: [  175.672618] microcode: CPU3: new patch_level=0x010000c8
2014-04-29T11:26:24.703842+02:00 micropit kernel: [  175.672649] CPU3 is up
2014-04-29T11:26:24.703842+02:00 micropit kernel: [  175.673061] ACPI: Waking up from system sleep state S3
2014-04-29T11:26:24.703843+02:00 micropit kernel: [  175.694570] ahci 0000:00:11.0: set SATA to AHCI mode
2014-04-29T11:26:24.703844+02:00 micropit kernel: [  175.694608] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
2014-04-29T11:26:24.703845+02:00 micropit kernel: [  175.694632] ohci-pci 0000:00:12.1: System wakeup disabled by ACPI
2014-04-29T11:26:24.703845+02:00 micropit kernel: [  175.705300] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
2014-04-29T11:26:24.703846+02:00 micropit kernel: [  175.705338] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
2014-04-29T11:26:24.703847+02:00 micropit kernel: [  175.705362] ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
2014-04-29T11:26:24.703848+02:00 micropit kernel: [  175.716289] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
2014-04-29T11:26:24.703848+02:00 micropit kernel: [  175.727343] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
2014-04-29T11:26:24.703849+02:00 micropit kernel: [  175.749363] PM: noirq resume of devices complete after 54.949 msecs
2014-04-29T11:26:24.703850+02:00 micropit kernel: [  175.749499] PM: early resume of devices complete after 0.099 msecs
2014-04-29T11:26:24.703851+02:00 micropit kernel: [  175.749876] r8169 0000:02:00.0: System wakeup disabled by ACPI
2014-04-29T11:26:24.703851+02:00 micropit kernel: [  175.750626] usb usb1: usb resume
2014-04-29T11:26:24.703852+02:00 micropit kernel: [  175.750643] ehci-pci 0000:00:12.2: resume root hub
2014-04-29T11:26:24.703853+02:00 micropit kernel: [  175.751044] usb usb2: usb resume
2014-04-29T11:26:24.703854+02:00 micropit kernel: [  175.751060] ehci-pci 0000:00:13.2: resume root hub
2014-04-29T11:26:24.703854+02:00 micropit kernel: [  175.751340] usb usb3: usb resume
2014-04-29T11:26:24.703855+02:00 micropit kernel: [  175.751358] ohci-pci 0000:00:12.0: resume root hub
2014-04-29T11:26:24.703856+02:00 micropit kernel: [  175.751542] nouveau  [     DRM] re-enabling device...
2014-04-29T11:26:24.703857+02:00 micropit kernel: [  175.751564] nouveau  [     DRM] resuming kernel object tree...
2014-04-29T11:26:24.703857+02:00 micropit kernel: [  175.751576] nouveau  [   VBIOS][0000:01:00.0] running init tables
2014-04-29T11:26:24.703858+02:00 micropit kernel: [  175.757512] usb usb4: usb resume
2014-04-29T11:26:24.703859+02:00 micropit kernel: [  175.757555] ohci-pci 0000:00:12.1: resume root hub
2014-04-29T11:26:24.703859+02:00 micropit kernel: [  175.757957] usb usb5: usb resume
2014-04-29T11:26:24.703860+02:00 micropit kernel: [  175.757972] ohci-pci 0000:00:13.0: resume root hub
2014-04-29T11:26:24.703861+02:00 micropit kernel: [  175.758451] usb usb6: usb resume
2014-04-29T11:26:24.703862+02:00 micropit kernel: [  175.758478] ohci-pci 0000:00:13.1: resume root hub
2014-04-29T11:26:24.703862+02:00 micropit kernel: [  175.758884] usb usb7: usb resume
2014-04-29T11:26:24.703863+02:00 micropit kernel: [  175.758898] ohci-pci 0000:00:14.5: resume root hub
2014-04-29T11:26:24.703864+02:00 micropit kernel: [  175.782237] hub 2-0:1.0: hub_resume
2014-04-29T11:26:24.703865+02:00 micropit kernel: [  175.782262] hub 2-0:1.0: port 3: status 0503 change 0000
2014-04-29T11:26:24.703865+02:00 micropit kernel: [  175.782354] usb 2-3: finish resume
2014-04-29T11:26:24.703866+02:00 micropit kernel: [  175.794523] nouveau  [     DRM] resuming client object trees...
2014-04-29T11:26:24.703904+02:00 micropit kernel: [  175.794609] nouveau  [     DRM] resuming display...
2014-04-29T11:26:24.703905+02:00 micropit kernel: [  175.803207] hub 1-0:1.0: hub_resume
2014-04-29T11:26:24.703906+02:00 micropit kernel: [  175.806603] hub 5-0:1.0: hub_resume
2014-04-29T11:26:24.703906+02:00 micropit kernel: [  175.808365] nouveau  [     DRM] 0xD4A7: Parsing digital output script table
2014-04-29T11:26:24.703907+02:00 micropit kernel: [  175.810093] hub 6-0:1.0: hub_resume
2014-04-29T11:26:24.703908+02:00 micropit kernel: [  175.810129] hub 7-0:1.0: hub_resume
2014-04-29T11:26:24.703908+02:00 micropit kernel: [  175.810168] hub 1-0:1.0: port 4: status 0503 change 0000
2014-04-29T11:26:24.703909+02:00 micropit kernel: [  175.810229] usb 1-4: finish resume
2014-04-29T11:26:24.703910+02:00 micropit kernel: [  175.811201] hub 3-0:1.0: hub_resume
2014-04-29T11:26:24.703911+02:00 micropit kernel: [  175.811222] hub 3-0:1.0: port 2: status 0103 change 0000
2014-04-29T11:26:24.703911+02:00 micropit kernel: [  175.811272] usb 3-2: finish resume
2014-04-29T11:26:24.703912+02:00 micropit kernel: [  175.812345] ohci-pci 0000:00:12.0: urb ffff8800cf8a52c0 path 2 ep0in 5ec20000 cc 5 --> status -62
2014-04-29T11:26:24.703913+02:00 micropit kernel: [  175.812402] usb 3-2: retry with reset-resume
2014-04-29T11:26:24.703914+02:00 micropit kernel: [  175.817201] hub 4-0:1.0: hub_resume
2014-04-29T11:26:24.703914+02:00 micropit kernel: [  175.817222] hub 4-0:1.0: port 2: status 0303 change 0000
2014-04-29T11:26:24.703915+02:00 micropit kernel: [  175.817230] hub 4-0:1.0: port 3: status 0303 change 0000
2014-04-29T11:26:24.703916+02:00 micropit kernel: [  175.817278] usb 4-2: finish resume
2014-04-29T11:26:24.703916+02:00 micropit kernel: [  175.817308] usb 4-3: finish resume
2014-04-29T11:26:24.703917+02:00 micropit kernel: [  175.818346] ohci-pci 0000:00:12.1: urb ffff8800cf8a6a80 path 3 ep0in 5ec20000 cc 5 --> status -62
2014-04-29T11:26:24.703918+02:00 micropit kernel: [  175.818353] ohci-pci 0000:00:12.1: urb ffff8800cf8a52c0 path 2 ep0in 5ec20000 cc 5 --> status -62
2014-04-29T11:26:24.703919+02:00 micropit kernel: [  175.818411] usb 4-3: retry with reset-resume
2014-04-29T11:26:24.703919+02:00 micropit kernel: [  175.818425] usb 4-2: retry with reset-resume
2014-04-29T11:26:24.703920+02:00 micropit kernel: [  175.835372] r8169 0000:02:00.0 eth0: link down
2014-04-29T11:26:24.703921+02:00 micropit kernel: [  175.836623] ohci-pci 0000:00:12.0: port[1] reset timeout, stat 00000113
2014-04-29T11:26:24.703930+02:00 micropit kernel: [  175.859061] nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
2014-04-29T11:26:24.703931+02:00 micropit kernel: [  175.880716] nouveau  [     DRM] 0xD4A7: Parsing digital output script table
2014-04-29T11:26:24.703931+02:00 micropit kernel: [  175.888094] ohci-pci 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
2014-04-29T11:26:24.703932+02:00 micropit kernel: [  175.940056] usb 3-2: reset full-speed USB device number 2 using ohci-pci
2014-04-29T11:26:24.703933+02:00 micropit kernel: [  175.962119] ohci-pci 0000:00:12.0: port[1] reset timeout, stat 00000113
2014-04-29T11:26:24.703934+02:00 micropit kernel: [  176.017028] ohci-pci 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
2014-04-29T11:26:24.703934+02:00 micropit kernel: [  176.054953] ata4: SATA link down (SStatus 0 SControl 300)
2014-04-29T11:26:24.703935+02:00 micropit kernel: [  176.057043] ata2: SATA link down (SStatus 0 SControl 300)
2014-04-29T11:26:24.703936+02:00 micropit kernel: [  176.084969] usb 3-2: ep0 maxpacket = 8
2014-04-29T11:26:24.703936+02:00 micropit kernel: [  176.099386] ftdi_sio 3-2:1.0: no reset_resume for driver ftdi_sio?
2014-04-29T11:26:24.703937+02:00 micropit kernel: [  176.104254] ftdi_sio 3-2:1.0: forced unbind
2014-04-29T11:26:24.703938+02:00 micropit kernel: [  176.109520] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
2014-04-29T11:26:24.703939+02:00 micropit kernel: [  176.110920] ohci-pci 0000:00:12.1: port[2] reset timeout, stat 00000313
2014-04-29T11:26:24.703939+02:00 micropit kernel: [  176.119796] ftdi_sio 3-2:1.0: device disconnected
2014-04-29T11:26:24.703940+02:00 micropit kernel: [  176.133347] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
2014-04-29T11:26:24.703941+02:00 micropit kernel: [  176.135681] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
2014-04-29T11:26:24.703941+02:00 micropit kernel: [  176.140587] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
2014-04-29T11:26:24.703942+02:00 micropit kernel: [  176.189401] ata5.00: configured for UDMA/33
2014-04-29T11:26:24.703943+02:00 micropit kernel: [  176.311724] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:26:24.703944+02:00 micropit kernel: [  176.363675] usb 4-3: reset low-speed USB device number 3 using ohci-pci
2014-04-29T11:26:24.703944+02:00 micropit kernel: [  176.386717] ohci-pci 0000:00:12.1: port[2] reset timeout, stat 00000313
2014-04-29T11:26:24.703945+02:00 micropit kernel: [  176.588527] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:26:24.703946+02:00 micropit kernel: [  176.678530] ohci-pci 0000:00:12.1: port[1] reset timeout, stat 00000313
2014-04-29T11:26:24.703947+02:00 micropit kernel: [  176.884255] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:26:24.703948+02:00 micropit kernel: [  176.940192] usb 4-2: reset low-speed USB device number 2 using ohci-pci
2014-04-29T11:26:24.703948+02:00 micropit kernel: [  176.964195] ohci-pci 0000:00:12.1: port[1] reset timeout, stat 00000313
2014-04-29T11:26:24.703949+02:00 micropit kernel: [  177.165979] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:26:24.703950+02:00 micropit kernel: [  177.470342] r8169 0000:02:00.0 eth0: link up
2014-04-29T11:26:24.703951+02:00 micropit kernel: [  179.625771] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
2014-04-29T11:26:24.703951+02:00 micropit kernel: [  179.650737] ata3.00: configured for UDMA/133
2014-04-29T11:26:24.703952+02:00 micropit kernel: [  179.656902] sd 2:0:0:0: [sdb] Starting disk
2014-04-29T11:26:24.703953+02:00 micropit kernel: [  181.263228] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
2014-04-29T11:26:24.703954+02:00 micropit kernel: [  181.277901] ata1.00: configured for UDMA/133
2014-04-29T11:26:24.703955+02:00 micropit kernel: [  181.283760] sd 0:0:0:0: [sda] Starting disk
2014-04-29T11:26:24.703955+02:00 micropit kernel: [  181.287937] PM: resume of devices complete after 5543.453 msecs
2014-04-29T11:26:24.703956+02:00 micropit kernel: [  181.293845] ftdi_sio 3-2:1.0: usb_probe_interface
2014-04-29T11:26:24.703957+02:00 micropit kernel: [  181.299687] ftdi_sio 3-2:1.0: usb_probe_interface - got id
2014-04-29T11:26:24.703957+02:00 micropit kernel: [  181.301279] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
2014-04-29T11:26:24.703958+02:00 micropit kernel: [  181.302946] usb 3-2: Detected FT232RL
2014-04-29T11:26:24.703959+02:00 micropit kernel: [  181.304868] usb 3-2: Number of endpoints 2
2014-04-29T11:26:24.703960+02:00 micropit kernel: [  181.306776] usb 3-2: Endpoint 1 MaxPacketSize 64
2014-04-29T11:26:24.703960+02:00 micropit kernel: [  181.308684] usb 3-2: Endpoint 2 MaxPacketSize 64
2014-04-29T11:26:24.703961+02:00 micropit kernel: [  181.310595] usb 3-2: Setting MaxPacketSize 64
2014-04-29T11:26:24.703962+02:00 micropit kernel: [  181.315742] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
2014-04-29T11:26:24.703963+02:00 micropit kernel: [  181.324081] PM: Finishing wakeup.
2014-04-29T11:26:24.703963+02:00 micropit kernel: [  181.330510] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
2014-04-29T11:26:24.709594+02:00 micropit kernel: [  181.329991] Restarting tasks ... done.
2014-04-29T11:26:24.721585+02:00 micropit systemd[1]: Time has been changed
2014-04-29T11:26:24.722195+02:00 micropit systemd[2232]: Time has been changed
2014-04-29T11:26:24.753622+02:00 micropit kernel: [  181.340133] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
2014-04-29T11:26:24.753644+02:00 micropit kernel: [  181.340142] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
2014-04-29T11:26:24.753647+02:00 micropit kernel: [  181.340150] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
2014-04-29T11:26:24.753650+02:00 micropit kernel: [  181.340156] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
2014-04-29T11:26:24.753652+02:00 micropit kernel: [  181.340163] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0004
2014-04-29T11:26:24.753655+02:00 micropit kernel: [  181.340178] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0004
2014-04-29T11:26:24.753657+02:00 micropit kernel: [  181.340197] hub 6-0:1.0: hub_suspend
2014-04-29T11:26:24.753660+02:00 micropit kernel: [  181.340207] usb usb6: bus auto-suspend, wakeup 1
2014-04-29T11:26:24.753662+02:00 micropit kernel: [  181.340213] ohci-pci 0000:00:13.1: suspend root hub
2014-04-29T11:26:24.753717+02:00 micropit kernel: [  181.340233] hub 7-0:1.0: hub_suspend
2014-04-29T11:26:24.753721+02:00 micropit kernel: [  181.340239] usb usb7: bus auto-suspend, wakeup 1
2014-04-29T11:26:24.753723+02:00 micropit kernel: [  181.340244] ohci-pci 0000:00:14.5: suspend root hub
2014-04-29T11:26:24.753726+02:00 micropit kernel: [  181.340259] hub 5-0:1.0: hub_suspend
2014-04-29T11:26:24.753728+02:00 micropit kernel: [  181.340264] usb usb5: bus auto-suspend, wakeup 1
2014-04-29T11:26:24.753731+02:00 micropit kernel: [  181.340269] ohci-pci 0000:00:13.0: suspend root hub
2014-04-29T11:26:24.871186+02:00 micropit kernel: [  181.497425] nouveau E[   PFIFO][0000:01:00.0] DMA_PUSHER - ch 1 [Xorg[2207]] get 0xbeef0200 put 0x00018838 state 0xc002018c (err: MEM_FAULT) push 0x00000000
2014-04-29T11:26:45.895258+02:00 micropit kernel: [  201.927560] PM: Syncing filesystems ... done.
2014-04-29T11:26:45.895306+02:00 micropit kernel: [  202.502058] PM: Preparing system for mem sleep
2014-04-29T11:26:45.929791+02:00 micropit kernel: [  202.537024] ohci-pci 0000:00:12.1: Dequeue: ffff8801294c6680 count 1
2014-04-29T11:26:45.929836+02:00 micropit kernel: [  202.537394] ohci-pci 0000:00:12.1: IRQ: count 1 intr-en 8000005e intr-stat 24 frame e21
2014-04-29T11:26:45.929839+02:00 micropit kernel: [  202.537432] ohci-pci 0000:00:12.1: Giveback: ffff8801294c6680 count 1
2014-04-29T11:27:03.796563+02:00 micropit kernel: [  202.555599] Freezing user space processes ... (elapsed 0.001 seconds) done.
2014-04-29T11:27:03.796594+02:00 micropit kernel: [  202.563215] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
2014-04-29T11:27:03.796595+02:00 micropit kernel: [  202.570436] PM: Entering mem sleep
2014-04-29T11:27:03.796596+02:00 micropit kernel: [  202.576660] usb 4-3: usb suspend, wakeup 0
2014-04-29T11:27:03.796597+02:00 micropit kernel: [  202.576719] usb 3-2: usb suspend, wakeup 0
2014-04-29T11:27:03.796598+02:00 micropit kernel: [  202.576732] ohci-pci 0000:00:12.1: Dequeue: ffff8801242568c0 count 1
2014-04-29T11:27:03.796598+02:00 micropit kernel: [  202.577534] ohci-pci 0000:00:12.1: IRQ: count 1 intr-en 8000005e intr-stat 24 frame e49
2014-04-29T11:27:03.796599+02:00 micropit kernel: [  202.577544] ohci-pci 0000:00:12.1: Giveback: ffff8801242568c0 count 1
2014-04-29T11:27:03.796600+02:00 micropit kernel: [  202.578579] usb 4-2: usb suspend, wakeup 1
2014-04-29T11:27:03.796601+02:00 micropit kernel: [  202.586142] usb 1-4: usb suspend, wakeup 0
2014-04-29T11:27:03.796601+02:00 micropit kernel: [  202.586261] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
2014-04-29T11:27:03.796602+02:00 micropit kernel: [  202.586351] sd 0:0:0:0: [sda] Synchronizing SCSI cache
2014-04-29T11:27:03.796603+02:00 micropit kernel: [  202.586372] usb usb7: usb auto-resume
2014-04-29T11:27:03.796604+02:00 micropit kernel: [  202.586383] ohci-pci 0000:00:14.5: resume root hub
2014-04-29T11:27:03.796605+02:00 micropit kernel: [  202.586453] sd 2:0:0:0: [sdb] Stopping disk
2014-04-29T11:27:03.796605+02:00 micropit kernel: [  202.586496] usb 2-3: usb suspend, wakeup 0
2014-04-29T11:27:03.796606+02:00 micropit kernel: [  202.586596] usb usb6: usb auto-resume
2014-04-29T11:27:03.796607+02:00 micropit kernel: [  202.586606] ohci-pci 0000:00:13.1: resume root hub
2014-04-29T11:27:03.796608+02:00 micropit kernel: [  202.586610] usb usb5: usb auto-resume
2014-04-29T11:27:03.796608+02:00 micropit kernel: [  202.586619] ohci-pci 0000:00:13.0: resume root hub
2014-04-29T11:27:03.796609+02:00 micropit kernel: [  202.586622] hub 3-0:1.0: hub_suspend
2014-04-29T11:27:03.796610+02:00 micropit kernel: [  202.586631] hub 2-0:1.0: hub_suspend
2014-04-29T11:27:03.796610+02:00 micropit kernel: [  202.586635] usb usb3: bus suspend, wakeup 0
2014-04-29T11:27:03.796611+02:00 micropit kernel: [  202.586641] usb usb2: bus suspend, wakeup 0
2014-04-29T11:27:03.796612+02:00 micropit kernel: [  202.586644] ohci-pci 0000:00:12.0: suspend root hub
2014-04-29T11:27:03.796613+02:00 micropit kernel: [  202.586646] ehci-pci 0000:00:13.2: suspend root hub
2014-04-29T11:27:03.796613+02:00 micropit kernel: [  202.586770] nouveau  [     DRM] suspending fbcon...
2014-04-29T11:27:03.796614+02:00 micropit kernel: [  202.613646] nouveau  [     DRM] suspending display...
2014-04-29T11:27:03.796615+02:00 micropit kernel: [  202.613661] hub 1-0:1.0: hub_suspend
2014-04-29T11:27:03.796615+02:00 micropit kernel: [  202.613665] usb usb1: bus suspend, wakeup 0
2014-04-29T11:27:03.796616+02:00 micropit kernel: [  202.613667] ehci-pci 0000:00:12.2: suspend root hub
2014-04-29T11:27:03.796617+02:00 micropit kernel: [  202.613701] hub 4-0:1.0: hub_suspend
2014-04-29T11:27:03.796618+02:00 micropit kernel: [  202.613703] nouveau  [     DRM] unpinning framebuffer(s)...
2014-04-29T11:27:03.796619+02:00 micropit kernel: [  202.613729] nouveau  [     DRM] evicting buffers...
2014-04-29T11:27:03.796619+02:00 micropit kernel: [  202.613760] usb usb4: bus suspend, wakeup 0
2014-04-29T11:27:03.796620+02:00 micropit kernel: [  202.613774] ohci-pci 0000:00:12.1: suspend root hub
2014-04-29T11:27:03.796621+02:00 micropit kernel: [  202.634861] hub 7-0:1.0: hub_resume
2014-04-29T11:27:03.796622+02:00 micropit kernel: [  202.634896] hub 7-0:1.0: hub_suspend
2014-04-29T11:27:03.796622+02:00 micropit kernel: [  202.634903] usb usb7: bus suspend, wakeup 0
2014-04-29T11:27:03.796623+02:00 micropit kernel: [  202.634909] ohci-pci 0000:00:14.5: suspend root hub
2014-04-29T11:27:03.796624+02:00 micropit kernel: [  202.634934] hub 5-0:1.0: hub_resume
2014-04-29T11:27:03.796624+02:00 micropit kernel: [  202.634987] hub 6-0:1.0: hub_resume
2014-04-29T11:27:03.796625+02:00 micropit kernel: [  202.634994] hub 5-0:1.0: hub_suspend
2014-04-29T11:27:03.796626+02:00 micropit kernel: [  202.634999] hub 6-0:1.0: hub_suspend
2014-04-29T11:27:03.796627+02:00 micropit kernel: [  202.635001] usb usb6: bus suspend, wakeup 0
2014-04-29T11:27:03.796628+02:00 micropit kernel: [  202.635005] ohci-pci 0000:00:13.1: suspend root hub
2014-04-29T11:27:03.796628+02:00 micropit kernel: [  202.635030] usb usb5: bus suspend, wakeup 0
2014-04-29T11:27:03.796629+02:00 micropit kernel: [  202.635043] ohci-pci 0000:00:13.0: suspend root hub
2014-04-29T11:27:03.796630+02:00 micropit kernel: [  202.635646] nouveau  [     DRM] waiting for kernel channels to go idle...
2014-04-29T11:27:03.796631+02:00 micropit kernel: [  202.635679] nouveau  [     DRM] suspending client object trees...
2014-04-29T11:27:03.796631+02:00 micropit kernel: [  202.635956] nouveau  [     DRM] suspending kernel object tree...
2014-04-29T11:27:03.796632+02:00 micropit kernel: [  202.643663] sd 0:0:0:0: [sda] Stopping disk
2014-04-29T11:27:03.796633+02:00 micropit kernel: [  203.524197] PM: suspend of devices complete after 948.638 msecs
2014-04-29T11:27:03.796634+02:00 micropit kernel: [  203.524625] PM: late suspend of devices complete after 0.396 msecs
2014-04-29T11:27:03.796634+02:00 micropit kernel: [  203.524942] r8169 0000:02:00.0: System wakeup enabled by ACPI
2014-04-29T11:27:03.796635+02:00 micropit kernel: [  203.535103] ohci-pci 0000:00:14.5: wakeup: 1
2014-04-29T11:27:03.796636+02:00 micropit kernel: [  203.535127] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
2014-04-29T11:27:03.796637+02:00 micropit kernel: [  203.535131] ohci-pci 0000:00:14.5: --> PCI D0
2014-04-29T11:27:03.796637+02:00 micropit kernel: [  203.535218] ehci-pci 0000:00:13.2: wakeup: 1
2014-04-29T11:27:03.796638+02:00 micropit kernel: [  203.535226] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
2014-04-29T11:27:03.796639+02:00 micropit kernel: [  203.546003] ehci-pci 0000:00:13.2: --> PCI D3hot
2014-04-29T11:27:03.796640+02:00 micropit kernel: [  203.546040] ohci-pci 0000:00:13.1: wakeup: 1
2014-04-29T11:27:03.796640+02:00 micropit kernel: [  203.546053] ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
2014-04-29T11:27:03.796641+02:00 micropit kernel: [  203.546056] ohci-pci 0000:00:13.1: --> PCI D0
2014-04-29T11:27:03.796642+02:00 micropit kernel: [  203.546077] ohci-pci 0000:00:13.0: wakeup: 1
2014-04-29T11:27:03.796643+02:00 micropit kernel: [  203.546082] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
2014-04-29T11:27:03.796644+02:00 micropit kernel: [  203.546085] ohci-pci 0000:00:13.0: --> PCI D0
2014-04-29T11:27:03.796645+02:00 micropit kernel: [  203.546112] ehci-pci 0000:00:12.2: wakeup: 1
2014-04-29T11:27:03.796645+02:00 micropit kernel: [  203.546120] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
2014-04-29T11:27:03.796646+02:00 micropit kernel: [  203.556984] ehci-pci 0000:00:12.2: --> PCI D3hot
2014-04-29T11:27:03.796647+02:00 micropit kernel: [  203.557019] ohci-pci 0000:00:12.1: wakeup: 1
2014-04-29T11:27:03.796647+02:00 micropit kernel: [  203.557032] ohci-pci 0000:00:12.1: System wakeup enabled by ACPI
2014-04-29T11:27:03.796648+02:00 micropit kernel: [  203.557035] ohci-pci 0000:00:12.1: --> PCI D0
2014-04-29T11:27:03.796649+02:00 micropit kernel: [  203.557056] ohci-pci 0000:00:12.0: wakeup: 1
2014-04-29T11:27:03.796649+02:00 micropit kernel: [  203.557061] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
2014-04-29T11:27:03.796650+02:00 micropit kernel: [  203.557064] ohci-pci 0000:00:12.0: --> PCI D0
2014-04-29T11:27:03.796651+02:00 micropit kernel: [  203.557124] PM: noirq suspend of devices complete after 32.515 msecs
2014-04-29T11:27:03.796652+02:00 micropit kernel: [  203.557163] ACPI: Preparing to enter system sleep state S3
2014-04-29T11:27:03.796652+02:00 micropit kernel: [  203.565768] PM: Saving platform NVS memory
2014-04-29T11:27:03.796653+02:00 micropit kernel: [  203.566271] Disabling non-boot CPUs ...
2014-04-29T11:27:03.796654+02:00 micropit kernel: [  203.568038] smpboot: CPU 1 is now offline
2014-04-29T11:27:03.796655+02:00 micropit kernel: [  203.570412] smpboot: CPU 2 is now offline
2014-04-29T11:27:03.796656+02:00 micropit kernel: [  203.572581] smpboot: CPU 3 is now offline
2014-04-29T11:27:03.796656+02:00 micropit kernel: [  203.573648] ACPI: Low-level resume complete
2014-04-29T11:27:03.796657+02:00 micropit kernel: [  203.573699] PM: Restoring platform NVS memory
2014-04-29T11:27:03.796658+02:00 micropit kernel: [  203.573802] PCI-DMA: Resuming GART IOMMU
2014-04-29T11:27:03.796658+02:00 micropit kernel: [  203.573806] PCI-DMA: Restoring GART aperture settings
2014-04-29T11:27:03.796659+02:00 micropit kernel: [  203.574053] LVT offset 0 assigned for vector 0xf9
2014-04-29T11:27:03.796660+02:00 micropit kernel: [  203.574061] microcode: CPU0: new patch_level=0x010000c8
2014-04-29T11:27:03.796661+02:00 micropit kernel: [  203.574065] Enabling non-boot CPUs ...
2014-04-29T11:27:03.796661+02:00 micropit kernel: [  203.574199] smpboot: Booting Node 0 Processor 1 APIC 0x1
2014-04-29T11:27:03.796662+02:00 micropit kernel: [  203.585225] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
2014-04-29T11:27:03.796663+02:00 micropit kernel: [  203.585226] perf: IBS APIC setup failed on cpu #1
2014-04-29T11:27:03.796664+02:00 micropit kernel: [  203.587478] microcode: CPU1: new patch_level=0x010000c8
2014-04-29T11:27:03.796665+02:00 micropit kernel: [  203.587502] CPU1 is up
2014-04-29T11:27:03.796665+02:00 micropit kernel: [  203.587564] smpboot: Booting Node 0 Processor 2 APIC 0x2
2014-04-29T11:27:03.796666+02:00 micropit kernel: [  203.598590] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
2014-04-29T11:27:03.796667+02:00 micropit kernel: [  203.598591] perf: IBS APIC setup failed on cpu #2
2014-04-29T11:27:03.796668+02:00 micropit kernel: [  203.600816] microcode: CPU2: new patch_level=0x010000c8
2014-04-29T11:27:03.796669+02:00 micropit kernel: [  203.600839] CPU2 is up
2014-04-29T11:27:03.796670+02:00 micropit kernel: [  203.600908] smpboot: Booting Node 0 Processor 3 APIC 0x3
2014-04-29T11:27:03.796670+02:00 micropit kernel: [  203.611934] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
2014-04-29T11:27:03.796671+02:00 micropit kernel: [  203.611935] perf: IBS APIC setup failed on cpu #3
2014-04-29T11:27:03.796672+02:00 micropit kernel: [  203.614160] microcode: CPU3: new patch_level=0x010000c8
2014-04-29T11:27:03.796673+02:00 micropit kernel: [  203.614183] CPU3 is up
2014-04-29T11:27:03.796673+02:00 micropit kernel: [  203.614650] ACPI: Waking up from system sleep state S3
2014-04-29T11:27:03.796674+02:00 micropit kernel: [  203.632904] ahci 0000:00:11.0: set SATA to AHCI mode
2014-04-29T11:27:03.796675+02:00 micropit kernel: [  203.632942] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
2014-04-29T11:27:03.796676+02:00 micropit kernel: [  203.632967] ohci-pci 0000:00:12.1: System wakeup disabled by ACPI
2014-04-29T11:27:03.796676+02:00 micropit kernel: [  203.643631] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
2014-04-29T11:27:03.796677+02:00 micropit kernel: [  203.643669] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
2014-04-29T11:27:03.796678+02:00 micropit kernel: [  203.643694] ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
2014-04-29T11:27:03.796679+02:00 micropit kernel: [  203.654610] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
2014-04-29T11:27:03.796679+02:00 micropit kernel: [  203.665654] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
2014-04-29T11:27:03.796680+02:00 micropit kernel: [  203.687684] PM: noirq resume of devices complete after 54.934 msecs
2014-04-29T11:27:03.796681+02:00 micropit kernel: [  203.687820] PM: early resume of devices complete after 0.099 msecs
2014-04-29T11:27:03.796682+02:00 micropit kernel: [  203.688200] r8169 0000:02:00.0: System wakeup disabled by ACPI
2014-04-29T11:27:03.796682+02:00 micropit kernel: [  203.688311] usb usb3: usb resume
2014-04-29T11:27:03.796683+02:00 micropit kernel: [  203.688330] ohci-pci 0000:00:12.0: resume root hub
2014-04-29T11:27:03.796684+02:00 micropit kernel: [  203.691113] usb usb4: usb resume
2014-04-29T11:27:03.796684+02:00 micropit kernel: [  203.691146] ohci-pci 0000:00:12.1: resume root hub
2014-04-29T11:27:03.796685+02:00 micropit kernel: [  203.691326] usb usb1: usb resume
2014-04-29T11:27:03.796686+02:00 micropit kernel: [  203.691339] usb usb5: usb resume
2014-04-29T11:27:03.796687+02:00 micropit kernel: [  203.691345] ohci-pci 0000:00:13.0: resume root hub
2014-04-29T11:27:03.796687+02:00 micropit kernel: [  203.691365] ehci-pci 0000:00:12.2: resume root hub
2014-04-29T11:27:03.796688+02:00 micropit kernel: [  203.691446] usb usb6: usb resume
2014-04-29T11:27:03.796689+02:00 micropit kernel: [  203.691460] ohci-pci 0000:00:13.1: resume root hub
2014-04-29T11:27:03.796689+02:00 micropit kernel: [  203.691550] usb usb2: usb resume
2014-04-29T11:27:03.796690+02:00 micropit kernel: [  203.691568] ehci-pci 0000:00:13.2: resume root hub
2014-04-29T11:27:03.796691+02:00 micropit kernel: [  203.692165] usb usb7: usb resume
2014-04-29T11:27:03.796692+02:00 micropit kernel: [  203.692183] ohci-pci 0000:00:14.5: resume root hub
2014-04-29T11:27:03.796692+02:00 micropit kernel: [  203.692294] nouveau  [     DRM] re-enabling device...
2014-04-29T11:27:03.796693+02:00 micropit kernel: [  203.692334] nouveau  [     DRM] resuming kernel object tree...
2014-04-29T11:27:03.796694+02:00 micropit kernel: [  203.692361] nouveau  [   VBIOS][0000:01:00.0] running init tables
2014-04-29T11:27:03.796694+02:00 micropit kernel: [  203.723536] hub 2-0:1.0: hub_resume
2014-04-29T11:27:03.796695+02:00 micropit kernel: [  203.723560] hub 2-0:1.0: port 3: status 0503 change 0000
2014-04-29T11:27:03.796696+02:00 micropit kernel: [  203.723630] usb 2-3: finish resume
2014-04-29T11:27:03.796697+02:00 micropit kernel: [  203.735094] nouveau  [     DRM] resuming client object trees...
2014-04-29T11:27:03.796737+02:00 micropit kernel: [  203.735173] nouveau  [     DRM] resuming display...
2014-04-29T11:27:03.796738+02:00 micropit kernel: [  203.739519] hub 6-0:1.0: hub_resume
2014-04-29T11:27:03.796739+02:00 micropit kernel: [  203.739530] hub 5-0:1.0: hub_resume
2014-04-29T11:27:03.796739+02:00 micropit kernel: [  203.740499] hub 7-0:1.0: hub_resume
2014-04-29T11:27:03.796740+02:00 micropit kernel: [  203.743495] hub 1-0:1.0: hub_resume
2014-04-29T11:27:03.796741+02:00 micropit kernel: [  203.743511] hub 1-0:1.0: port 4: status 0503 change 0000
2014-04-29T11:27:03.796742+02:00 micropit kernel: [  203.743569] usb 1-4: finish resume
2014-04-29T11:27:03.796742+02:00 micropit kernel: [  203.747524] hub 3-0:1.0: hub_resume
2014-04-29T11:27:03.796743+02:00 micropit kernel: [  203.747535] hub 3-0:1.0: port 2: status 0103 change 0000
2014-04-29T11:27:03.796744+02:00 micropit kernel: [  203.747570] usb 3-2: finish resume
2014-04-29T11:27:03.796745+02:00 micropit kernel: [  203.748613] ohci-pci 0000:00:12.0: urb ffff8800cddf88c0 path 2 ep0in 5ec20000 cc 5 --> status -62
2014-04-29T11:27:03.796745+02:00 micropit kernel: [  203.748640] usb 3-2: retry with reset-resume
2014-04-29T11:27:03.796746+02:00 micropit kernel: [  203.750490] hub 4-0:1.0: hub_resume
2014-04-29T11:27:03.796747+02:00 micropit kernel: [  203.750503] hub 4-0:1.0: port 2: status 0303 change 0000
2014-04-29T11:27:03.796748+02:00 micropit kernel: [  203.750506] hub 4-0:1.0: port 3: status 0303 change 0000
2014-04-29T11:27:03.796748+02:00 micropit kernel: [  203.750533] usb 4-2: finish resume
2014-04-29T11:27:03.796749+02:00 micropit kernel: [  203.750568] usb 4-3: finish resume
2014-04-29T11:27:03.796750+02:00 micropit kernel: [  203.752763] ohci-pci 0000:00:12.1: urb ffff8800cf8a5200 path 3 ep0in 5ec20000 cc 5 --> status -62
2014-04-29T11:27:03.796751+02:00 micropit kernel: [  203.752765] ohci-pci 0000:00:12.1: urb ffff8800cddf88c0 path 2 ep0in 5ec20000 cc 5 --> status -62
2014-04-29T11:27:03.796752+02:00 micropit kernel: [  203.752800] usb 4-2: retry with reset-resume
2014-04-29T11:27:03.796753+02:00 micropit kernel: [  203.752806] usb 4-3: retry with reset-resume
2014-04-29T11:27:03.796753+02:00 micropit kernel: [  203.761052] r8169 0000:02:00.0 eth0: link down
2014-04-29T11:27:03.796754+02:00 micropit kernel: [  203.772489] ohci-pci 0000:00:12.0: port[1] reset timeout, stat 00000113
2014-04-29T11:27:03.796755+02:00 micropit kernel: [  203.777674] nouveau  [     DRM] 0xD4A7: Parsing digital output script table
2014-04-29T11:27:03.796756+02:00 micropit kernel: [  203.826414] ohci-pci 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
2014-04-29T11:27:03.796757+02:00 micropit kernel: [  203.829675] nouveau  [     DRM] Setting dpms mode 3 on TV encoder (output 3)
2014-04-29T11:27:03.796757+02:00 micropit kernel: [  203.851468] nouveau  [     DRM] 0xD4A7: Parsing digital output script table
2014-04-29T11:27:03.796758+02:00 micropit kernel: [  203.878367] usb 3-2: reset full-speed USB device number 2 using ohci-pci
2014-04-29T11:27:03.796759+02:00 micropit kernel: [  203.900370] ohci-pci 0000:00:12.0: port[1] reset timeout, stat 00000113
2014-04-29T11:27:03.796760+02:00 micropit kernel: [  203.952300] ohci-pci 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
2014-04-29T11:27:03.796760+02:00 micropit kernel: [  203.995272] ata4: SATA link down (SStatus 0 SControl 300)
2014-04-29T11:27:03.796761+02:00 micropit kernel: [  203.996715] ata2: SATA link down (SStatus 0 SControl 300)
2014-04-29T11:27:03.796762+02:00 micropit kernel: [  204.017251] usb 3-2: ep0 maxpacket = 8
2014-04-29T11:27:03.796763+02:00 micropit kernel: [  204.028660] ftdi_sio 3-2:1.0: no reset_resume for driver ftdi_sio?
2014-04-29T11:27:03.796763+02:00 micropit kernel: [  204.033590] ftdi_sio 3-2:1.0: forced unbind
2014-04-29T11:27:03.796764+02:00 micropit kernel: [  204.038741] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
2014-04-29T11:27:03.796765+02:00 micropit kernel: [  204.040250] ohci-pci 0000:00:12.1: port[2] reset timeout, stat 00000313
2014-04-29T11:27:03.796766+02:00 micropit kernel: [  204.049053] ftdi_sio 3-2:1.0: device disconnected
2014-04-29T11:27:03.796767+02:00 micropit kernel: [  204.066670] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
2014-04-29T11:27:03.796767+02:00 micropit kernel: [  204.068148] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
2014-04-29T11:27:03.796768+02:00 micropit kernel: [  204.069573] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
2014-04-29T11:27:03.796769+02:00 micropit kernel: [  204.112557] ata5.00: configured for UDMA/33
2014-04-29T11:27:03.796770+02:00 micropit kernel: [  204.241044] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:27:03.796770+02:00 micropit kernel: [  204.293004] usb 4-3: reset low-speed USB device number 3 using ohci-pci
2014-04-29T11:27:03.796771+02:00 micropit kernel: [  204.316036] ohci-pci 0000:00:12.1: port[2] reset timeout, stat 00000313
2014-04-29T11:27:03.796772+02:00 micropit kernel: [  204.517788] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:27:03.796773+02:00 micropit kernel: [  204.603735] ohci-pci 0000:00:12.1: port[1] reset timeout, stat 00000313
2014-04-29T11:27:03.796774+02:00 micropit kernel: [  204.805527] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:27:03.796775+02:00 micropit kernel: [  204.857489] usb 4-2: reset low-speed USB device number 2 using ohci-pci
2014-04-29T11:27:03.796775+02:00 micropit kernel: [  204.881523] ohci-pci 0000:00:12.1: port[1] reset timeout, stat 00000313
2014-04-29T11:27:03.796776+02:00 micropit kernel: [  205.083278] ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
2014-04-29T11:27:03.796777+02:00 micropit kernel: [  205.482032] r8169 0000:02:00.0 eth0: link up
2014-04-29T11:27:03.796778+02:00 micropit kernel: [  207.566033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
2014-04-29T11:27:03.796778+02:00 micropit kernel: [  207.593881] ata3.00: configured for UDMA/133
2014-04-29T11:27:03.796779+02:00 micropit kernel: [  207.599719] sd 2:0:0:0: [sdb] Starting disk
2014-04-29T11:27:03.796780+02:00 micropit kernel: [  209.298461] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
2014-04-29T11:27:03.796781+02:00 micropit kernel: [  209.313216] ata1.00: configured for UDMA/133
2014-04-29T11:27:03.796781+02:00 micropit kernel: [  209.319039] sd 0:0:0:0: [sda] Starting disk
2014-04-29T11:27:03.796782+02:00 micropit kernel: [  209.323788] PM: resume of devices complete after 5641.076 msecs
2014-04-29T11:27:03.796783+02:00 micropit kernel: [  209.325431] ftdi_sio 3-2:1.0: usb_probe_interface
2014-04-29T11:27:03.796784+02:00 micropit kernel: [  209.327031] ftdi_sio 3-2:1.0: usb_probe_interface - got id
2014-04-29T11:27:03.796784+02:00 micropit kernel: [  209.328619] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
2014-04-29T11:27:03.796785+02:00 micropit kernel: [  209.330280] usb 3-2: Detected FT232RL
2014-04-29T11:27:03.796786+02:00 micropit kernel: [  209.332159] usb 3-2: Number of endpoints 2
2014-04-29T11:27:03.796786+02:00 micropit kernel: [  209.334037] usb 3-2: Endpoint 1 MaxPacketSize 64
2014-04-29T11:27:03.796787+02:00 micropit kernel: [  209.335916] usb 3-2: Endpoint 2 MaxPacketSize 64
2014-04-29T11:27:03.796788+02:00 micropit kernel: [  209.337787] usb 3-2: Setting MaxPacketSize 64
2014-04-29T11:27:03.796789+02:00 micropit kernel: [  209.342353] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
2014-04-29T11:27:03.796789+02:00 micropit kernel: [  209.357457] PM: Finishing wakeup.
2014-04-29T11:27:03.796790+02:00 micropit kernel: [  209.363426] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
2014-04-29T11:27:03.796791+02:00 micropit kernel: [  209.363203] Restarting tasks ... done.
2014-04-29T11:27:03.832102+02:00 micropit kernel: [  209.368438] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
2014-04-29T11:27:03.832114+02:00 micropit kernel: [  209.368442] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
2014-04-29T11:27:03.832115+02:00 micropit kernel: [  209.368444] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
2014-04-29T11:27:03.832116+02:00 micropit kernel: [  209.368447] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
2014-04-29T11:27:03.832116+02:00 micropit kernel: [  209.368449] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0004
2014-04-29T11:27:03.832117+02:00 micropit kernel: [  209.368460] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0004
2014-04-29T11:27:03.832118+02:00 micropit kernel: [  209.368470] hub 7-0:1.0: hub_suspend
2014-04-29T11:27:03.832119+02:00 micropit kernel: [  209.368476] usb usb7: bus auto-suspend, wakeup 1
2014-04-29T11:27:03.832120+02:00 micropit kernel: [  209.368479] ohci-pci 0000:00:14.5: suspend root hub
2014-04-29T11:27:03.832121+02:00 micropit kernel: [  209.368492] hub 5-0:1.0: hub_suspend
2014-04-29T11:27:03.832121+02:00 micropit kernel: [  209.368494] usb usb5: bus auto-suspend, wakeup 1
2014-04-29T11:27:03.832122+02:00 micropit kernel: [  209.368496] ohci-pci 0000:00:13.0: suspend root hub
2014-04-29T11:27:03.832123+02:00 micropit kernel: [  209.368509] hub 6-0:1.0: hub_suspend
2014-04-29T11:27:03.832124+02:00 micropit kernel: [  209.368510] usb usb6: bus auto-suspend, wakeup 1
2014-04-29T11:27:03.832124+02:00 micropit kernel: [  209.368513] ohci-pci 0000:00:13.1: suspend root hub
2014-04-29T11:27:16.768648+02:00 micropit kernel: [  222.325583] nouveau E[   PFIFO][0000:01:00.0] DMA_PUSHER - ch 1 [Xorg[2207]] get 0xbeef0200 put 0x0001d9fc state 0xc002018c (err: MEM_FAULT) push 0x00000000
2014-04-29T11:27:03.813155+02:00 micropit systemd[1]: Time has been changed

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux