This clock gate description is missing in the older Reference manuals. It is present on the SoC to provide 960MHz reference clock to the internal USB PHYs. Reference: DRA75x_DRA74x_ES1.1_NDA_TRM_vO.pdf, pg. 900, Table 3-812. CM_COREAON_L3INIT_60M_GFCLK_CLKCTRL Use l3init_960m_gfclk as parent of usb_otg_ss1_refclk960m and usb_otg_ss2_refclk960m. CC: Tero Kristo <t-kristo@xxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cfb8fc7..c767687 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1386,6 +1386,14 @@ ti,dividers = <1>, <8>; }; + l3init_960m_gfclk: l3init_960m_gfclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_usb_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x06c0>; + }; + dss_32khz_clk: dss_32khz_clk { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1533,7 +1541,7 @@ usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x13f0>; }; @@ -1541,7 +1549,7 @@ usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x1340>; }; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html