Hi, I am trying to send data to a USB device connected to a USB3.0 port over a USB bulk end point using libusb APIs . It is failing failed with error ERROR_IO. The same device and the test program works fine on a USB2.0 port. After enabling the XHCI debug options, I found that I am getting the following errors: "Endpoint xxx not halted, refusing to reset Transfer error on endpoint" I have tested in following kernel : 3.13.7 3.11.0-18 Both gave the same results. The test has been performed on USB 3.0 host controller. Can you please let me know the root cause and possible solutions? Attached is the debug log. Regards, Keerthy This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html