Cc'ing Mathias Nyman, who is taking over as xHCI driver maintainer.
On Sun, Mar 23, 2014 at 07:16:03PM +0100, baumber@xxxxxxxxxxx wrote:
> Hello,
>
> I have problems with my USB 3.0 devices; external HDDs (HGST Touro Mobile Pro (Simpletech-Chip), Fantec case with WDC, Asmedia Chip) and a Sandisk card reader, with a "NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)" controller.
>
> I get the following errors; => then reset of device, then freezing of device or many "xhci_drop_endpoint called with disabled ep"-messages
> Suspend and Hibernate is not possible anymore.
> => a detailed log is in file usb3_problems.txt
>
> [18853.074081] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803e2119c80
> [18853.074088] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803e2119cc0
> [18890.189088] xhci_hcd 0000:08:00.0: xHCI host not responding to stop endpoint command.
> [18890.189096] xhci_hcd 0000:08:00.0: Assuming host is dying, halting host.
> [18890.232182] xhci_hcd 0000:08:00.0: Host not halted after 16000 microseconds.
> [18890.232193] xhci_hcd 0000:08:00.0: Non-responsive xHCI host is not halting.
> [18890.232197] xhci_hcd 0000:08:00.0: Completing active URBs anyway.
> [18890.232209] xhci_hcd 0000:08:00.0: HC died; cleaning up
>
> Furthermore I have tried kernel 3.14rc6 but the same issues.
>
> ** My configuration:
> Home PC: ASUS P7P55D-E PRO with Intel Chipset P55 with PLX PEX PCI Bridges attached to NEC Controller
> => detailed information: pc_lspci_PLX_PEX_Chip_problems.txt
> **
>
> For my office PC I have bought a PCIe-Card with the same NEC-Controller (it is exactly the same revision reported by lspci, pc_lspci_PCIe_Card_noproblems.txt) and all the usb3-devices are working fine there => no errors !?
>
> It is the same USB3-NEC-controller in both PCs, but only with a different connection (PLX PEX PCI Bridge vs. PCIe-Card).
>
> Please help me to get my Usb3-devices working!
>
> Thank you for your support!
>
> Best regards, Bernhard
>
> ** Chipset P55 with PLX PEX PCI Bridges vs Sandybridge Mainboard with PCIe-Card(PCIe 2.0 x1, 5Gbps):
>
> Here are the differences between the lspci outputs;
>
> PCIe Type | CacheLineSize | Flags; AuxCurrent | PME |DevCtl | MaxReadReq |AuxPwr | CommClk
> -------------------------------------------------------------------------------------------------
> PLX Chip, NEC | 32 | AuxCurrent=375mA |D3cold+ |NoSnoop+ | 512 bytes |AuxPwr+ | CommClk-
> PCIe-Card NEC | 64 | AuxCurrent=0mA |D3cold- |NoSnoop- | 128 bytes |AuxPwr- | CommClk+
>
> lsusb diffs;
> PLX Chip, NEC; bmAttributes 0x02 (no LTM support)
> PCIe-Card: bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported
>
> PLX Chip with NEC: problems; pc_lspci_PLX_PEX_Chip_problems.txt and pc_lsusb_PLX_PEX_Chip_problems.txt
> -------------------
> Cache Line Size: 32 bytes
>
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>
>
> PCIe-Card; no problems; pc_lspci_PCIe_Card_noproblems.txt and pc_lsusb_PCIe_Card_noproblems.txt
> ------------
> Cache Line Size: 64 bytes
>
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
>
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>
> Mar 16 21:29:27 stargazer kernel: [ 8364.261248] usb 4-1: reset SuperSpeed USB device number 4 using xhci_hcd
> Mar 16 21:29:27 stargazer kernel: [ 8364.280610] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
> Mar 16 21:29:27 stargazer kernel: [ 8364.289092] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804087c8200
> Mar 16 21:29:27 stargazer kernel: [ 8364.289095] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804087c8240
> Mar 16 21:29:34 stargazer kernel: [ 8370.985086] usb 4-1: reset SuperSpeed USB device number 4 using xhci_hcd
> Mar 16 21:29:34 stargazer kernel: [ 8371.004475] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
> Mar 16 21:29:34 stargazer kernel: [ 8371.013046] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804087c8200
> Mar 16 21:29:34 stargazer kernel: [ 8371.013053] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804087c8240
> Mar 16 21:30:07 stargazer kernel: [ 8404.221042] sdf: detected capacity change from 249823232 to 0
> Mar 16 21:30:10 stargazer kernel: [ 8407.125742] usb 4-1: USB disconnect, device number 4
> Mar 16 21:30:16 stargazer kernel: [ 8412.676247] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd
> Mar 16 21:30:16 stargazer kernel: [ 8412.694601] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
> Mar 16 21:30:19 stargazer kernel: [ 8415.801168] usb 4-1: New USB device found, idVendor=174c, idProduct=5106
> Mar 16 21:30:19 stargazer kernel: [ 8415.801175] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> Mar 16 21:30:19 stargazer kernel: [ 8415.801179] usb 4-1: Product: AS2105
> Mar 16 21:30:19 stargazer kernel: [ 8415.801183] usb 4-1: Manufacturer: ASMedia
> Mar 16 21:30:19 stargazer kernel: [ 8415.801186] usb 4-1: SerialNumber: WD-WXL1E61JNVH2
> Mar 16 21:30:19 stargazer kernel: [ 8415.802226] usb-storage 4-1:1.0: USB Mass Storage device detected
> Mar 16 21:30:19 stargazer kernel: [ 8415.802668] scsi15 : usb-storage 4-1:1.0
> Mar 16 21:30:19 stargazer mtp-probe: checking bus 4, device 5: "/sys/devices/pci0000:00/0000:00:1c.0/0000:06:00.0/0000:07:01.0/0000:08:00.0/usb4/4-1"
> Mar 16 21:30:19 stargazer mtp-probe: bus: 4, device: 5 was not an MTP device
> Mar 16 21:30:20 stargazer kernel: [ 8416.803014] scsi 15:0:0:0: Direct-Access WDC WD10 JPVT-00A1YT0 01.0 PQ: 0 ANSI: 5
> Mar 16 21:30:20 stargazer kernel: [ 8416.803499] sd 15:0:0:0: Attached scsi generic sg6 type 0
> Mar 16 21:30:20 stargazer kernel: [ 8416.803638] sd 15:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> Mar 16 21:30:20 stargazer kernel: [ 8416.804350] sd 15:0:0:0: [sde] Write Protect is off
> Mar 16 21:30:20 stargazer kernel: [ 8416.804358] sd 15:0:0:0: [sde] Mode Sense: 23 00 00 00
> Mar 16 21:30:20 stargazer kernel: [ 8416.805940] sd 15:0:0:0: [sde] No Caching mode page found
> Mar 16 21:30:20 stargazer kernel: [ 8416.805949] sd 15:0:0:0: [sde] Assuming drive cache: write through
> Mar 16 21:30:20 stargazer kernel: [ 8416.808336] sd 15:0:0:0: [sde] No Caching mode page found
> Mar 16 21:30:20 stargazer kernel: [ 8416.808343] sd 15:0:0:0: [sde] Assuming drive cache: write through
> Mar 16 21:30:20 stargazer kernel: [ 8416.833953] sde: sde1
> Mar 16 21:30:20 stargazer kernel: [ 8416.835864] sd 15:0:0:0: [sde] No Caching mode page found
> Mar 16 21:30:20 stargazer kernel: [ 8416.835868] sd 15:0:0:0: [sde] Assuming drive cache: write through
> Mar 16 21:30:20 stargazer kernel: [ 8416.835870] sd 15:0:0:0: [sde] Attached SCSI disk
> Mar 16 21:30:31 stargazer kernel: [ 8427.730368] usb 4-1: reset SuperSpeed USB device number 5 using xhci_hcd
> Mar 16 21:30:31 stargazer kernel: [ 8427.748097] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
> Mar 16 21:30:31 stargazer kernel: [ 8427.749549] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880407ca7480
> Mar 16 21:30:31 stargazer kernel: [ 8427.749555] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880407ca74c0
> Mar 16 21:30:31 stargazer kernel: [ 8427.870515] usb 4-1: reset SuperSpeed USB device number 5 using xhci_hcd
> Mar 16 21:30:31 stargazer kernel: [ 8427.888132] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
> Mar 16 21:30:31 stargazer kernel: [ 8427.889549] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880407ca7480
> Mar 16 21:30:31 stargazer kernel: [ 8427.889555] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880407ca74c0
> Mar 16 21:31:07 stargazer kernel: [ 8463.834953] xhci_hcd 0000:08:00.0: xHCI host not responding to stop endpoint command.
> Mar 16 21:31:07 stargazer kernel: [ 8463.834960] xhci_hcd 0000:08:00.0: Assuming host is dying, halting host.
> Mar 16 21:31:07 stargazer kernel: [ 8463.877726] xhci_hcd 0000:08:00.0: Host not halted after 16000 microseconds.
> Mar 16 21:31:07 stargazer kernel: [ 8463.877735] xhci_hcd 0000:08:00.0: Non-responsive xHCI host is not halting.
> Mar 16 21:31:07 stargazer kernel: [ 8463.877738] xhci_hcd 0000:08:00.0: Completing active URBs anyway.
> Mar 16 21:31:07 stargazer kernel: [ 8463.877749] xhci_hcd 0000:08:00.0: HC died; cleaning up
> Mar 16 21:31:07 stargazer kernel: [ 8463.877840] usb 4-1: USB disconnect, device number 5
> Mar 16 21:31:07 stargazer kernel: [ 8463.877876] sd 15:0:0:0: Device offlined - not ready after error recovery
> Mar 16 21:31:07 stargazer kernel: [ 8463.877886] sd 15:0:0:0: [sde] Unhandled error code
> Mar 16 21:31:07 stargazer kernel: [ 8463.877890] sd 15:0:0:0: [sde]
> Mar 16 21:31:07 stargazer kernel: [ 8463.877893] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
> Mar 16 21:31:07 stargazer kernel: [ 8463.877896] sd 15:0:0:0: [sde] CDB:
> Mar 16 21:31:07 stargazer kernel: [ 8463.877901] Read(10): 28 00 00 11 3f 00 00 00 80 00
> Mar 16 21:31:07 stargazer kernel: [ 8463.877921] end_request: I/O error, dev sde, sector 1130240
>
> Feb 21 22:45:13 stargazer kernel: [18818.294509] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
> Feb 21 22:45:17 stargazer kernel: [18821.519081] usb 4-1: New USB device found, idVendor=174c, idProduct=5106
> Feb 21 22:45:17 stargazer kernel: [18821.519089] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> Feb 21 22:45:17 stargazer kernel: [18821.519093] usb 4-1: Product: AS2105
> Feb 21 22:45:17 stargazer kernel: [18821.519097] usb 4-1: Manufacturer: ASMedia
> Feb 21 22:45:17 stargazer kernel: [18821.519100] usb 4-1: SerialNumber: WD-WXL1E61JNVH2
> Feb 21 22:45:17 stargazer mtp-probe: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1c.0/0000:06:00.0/0000:07:01.0/0000:08:00.0/usb4/4-1"
> Feb 21 22:45:17 stargazer mtp-probe: bus: 4, device: 2 was not an MTP device
> Feb 21 22:45:17 stargazer kernel: [18821.551731] usb-storage 4-1:1.0: USB Mass Storage device detected
> Feb 21 22:45:17 stargazer kernel: [18821.551981] scsi12 : usb-storage 4-1:1.0
> Feb 21 22:45:17 stargazer kernel: [18821.553376] usbcore: registered new interface driver usb-storage
> Feb 21 22:45:18 stargazer kernel: [18822.553274] scsi 12:0:0:0: Direct-Access WDC WD10 JPVT-00A1YT0 01.0 PQ: 0 ANSI: 5
> Feb 21 22:45:18 stargazer kernel: [18822.553727] sd 12:0:0:0: Attached scsi generic sg6 type 0
> Feb 21 22:45:18 stargazer kernel: [18822.554035] sd 12:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> Feb 21 22:45:18 stargazer kernel: [18822.554685] sd 12:0:0:0: [sde] Write Protect is off
> Feb 21 22:45:18 stargazer kernel: [18822.554691] sd 12:0:0:0: [sde] Mode Sense: 23 00 00 00
> Feb 21 22:45:18 stargazer kernel: [18822.555434] sd 12:0:0:0: [sde] No Caching mode page found
> Feb 21 22:45:18 stargazer kernel: [18822.555443] sd 12:0:0:0: [sde] Assuming drive cache: write through
> Feb 21 22:45:18 stargazer kernel: [18822.557460] sd 12:0:0:0: [sde] No Caching mode page found
> Feb 21 22:45:18 stargazer kernel: [18822.557468] sd 12:0:0:0: [sde] Assuming drive cache: write through
> Feb 21 22:45:18 stargazer kernel: [18822.585148] sde: sde1
> Feb 21 22:45:18 stargazer kernel: [18822.587634] sd 12:0:0:0: [sde] No Caching mode page found
> Feb 21 22:45:18 stargazer kernel: [18822.587640] sd 12:0:0:0: [sde] Assuming drive cache: write through
> Feb 21 22:45:18 stargazer kernel: [18822.587646] sd 12:0:0:0: [sde] Attached SCSI disk
> Feb 21 22:45:48 stargazer kernel: [18852.915140] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
> Feb 21 22:45:48 stargazer kernel: [18852.934076] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803e2119c80
> Feb 21 22:45:48 stargazer kernel: [18852.934083] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803e2119cc0
> Feb 21 22:45:48 stargazer kernel: [18853.055252] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
> Feb 21 22:45:48 stargazer kernel: [18853.074081] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803e2119c80
> Feb 21 22:45:48 stargazer kernel: [18853.074088] xhci_hcd 0000:08:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803e2119cc0
> Feb 21 22:46:25 stargazer kernel: [18890.189088] xhci_hcd 0000:08:00.0: xHCI host not responding to stop endpoint command.
> Feb 21 22:46:25 stargazer kernel: [18890.189096] xhci_hcd 0000:08:00.0: Assuming host is dying, halting host.
> Feb 21 22:46:25 stargazer kernel: [18890.232182] xhci_hcd 0000:08:00.0: Host not halted after 16000 microseconds.
> Feb 21 22:46:25 stargazer kernel: [18890.232193] xhci_hcd 0000:08:00.0: Non-responsive xHCI host is not halting.
> Feb 21 22:46:25 stargazer kernel: [18890.232197] xhci_hcd 0000:08:00.0: Completing active URBs anyway.
> Feb 21 22:46:25 stargazer kernel: [18890.232209] xhci_hcd 0000:08:00.0: HC died; cleaning up
> Feb 21 22:46:25 stargazer kernel: [18890.232274] usb 4-1: USB disconnect, device number 2
> Feb 21 22:46:25 stargazer kernel: [18890.232333] sd 12:0:0:0: Device offlined - not ready after error recovery
> Feb 21 22:46:25 stargazer kernel: [18890.232345] sd 12:0:0:0: [sde] Unhandled error code
> Feb 21 22:46:25 stargazer kernel: [18890.232348] sd 12:0:0:0: [sde]
> Feb 21 22:46:25 stargazer kernel: [18890.232351] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
> Feb 21 22:46:25 stargazer kernel: [18890.232354] sd 12:0:0:0: [sde] CDB:
> Feb 21 22:46:25 stargazer kernel: [18890.232357] Read(10): 28 00 00 06 06 80 00 00 80 00
> Feb 21 22:46:25 stargazer kernel: [18890.232369] end_request: I/O error, dev sde, sector 394880
> Feb 21 22:46:25 stargazer kernel: [18890.233122] usb 4-1: Set SEL for device-initiated U1 failed.
> Feb 21 22:46:25 stargazer kernel: [18890.233131] usb 4-1: Set SEL for device-initiated U2 failed.
>
>
> no hibernate possible, after usb3.0 failure
>
> Hibernate:
> 21 22:48:08 stargazer kernel: [18992.858882] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
> Feb 21 22:48:08 stargazer kernel: [18992.858885] PM: Marking nosave pages: [mem 0xdfe70000-0xffffffff]
> Feb 21 22:48:08 stargazer kernel: [18992.859115] PM: Basic memory bitmaps created
> Feb 21 22:48:09 stargazer kernel: [18992.859116] PM: Syncing filesystems ... done.
> Feb 21 22:48:09 stargazer kernel: [18992.864942] Freezing user space processes ... (elapsed 0.001 seconds) done.
> Feb 21 22:48:09 stargazer kernel: [18992.866512] PM: Preallocating image memory... done (allocated 404052 pages)
> Feb 21 22:48:09 stargazer kernel: [18993.173244] PM: Allocated 1616208 kbytes in 0.30 seconds (5387.36 MB/s)
> Feb 21 22:48:09 stargazer kernel: [18993.173245] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> Feb 21 22:48:09 stargazer kernel: [18993.174608] Suspending console(s) (use no_console_suspend to debug)
> Feb 21 22:48:09 stargazer kernel: [18993.175206] xhci_hcd 0000:08:00.0: Secondary root hub is not suspended
> Feb 21 22:48:09 stargazer kernel: [18993.175212] pci_pm_freeze(): check_root_hub_suspended+0x0/0x80 returns -16
> Feb 21 22:48:09 stargazer kernel: [18993.175215] dpm_run_callback(): pci_pm_freeze+0x0/0xc0 returns -16
> Feb 21 22:48:09 stargazer kernel: [18993.175216] PM: Device 0000:08:00.0 failed to freeze async: error -16
> Feb 21 22:48:09 stargazer kernel: [18993.285904] pata_jmicron 0000:03:00.1: setting latency timer to 64
>
> no suspend possible, after usb3.0 failure
> Feb 21 22:49:37 stargazer kernel: [19078.890388] PM: Syncing filesystems ... done.
> Feb 21 22:49:37 stargazer kernel: [19078.894695] PM: Preparing system for mem sleep
> Feb 21 22:49:37 stargazer kernel: [19078.894856] Freezing user space processes ... (elapsed 0.001 seconds) done.
> Feb 21 22:49:37 stargazer kernel: [19078.896393] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> Feb 21 22:49:37 stargazer kernel: [19078.897518] PM: Entering mem sleep
> Feb 21 22:49:37 stargazer kernel: [19078.897539] Suspending console(s) (use no_console_suspend to debug)
> Feb 21 22:49:37 stargazer kernel: [19078.897754] sd 9:0:0:0: [sdd] Synchronizing SCSI cache
> Feb 21 22:49:37 stargazer kernel: [19078.897759] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
> Feb 21 22:49:37 stargazer kernel: [19078.897769] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
> Feb 21 22:49:37 stargazer kernel: [19078.897792] sd 4:0:0:0: [sda] Synchronizing SCSI cache
> Feb 21 22:49:37 stargazer kernel: [19078.897890] sd 5:0:0:0: [sdb] Stopping disk
> Feb 21 22:49:37 stargazer kernel: [19078.897913] sd 9:0:0:0: [sdd] Stopping disk
> Feb 21 22:49:37 stargazer kernel: [19078.897915] sd 7:0:0:0: [sdc] Stopping disk
> Feb 21 22:49:37 stargazer kernel: [19078.897967] sd 4:0:0:0: [sda] Stopping disk
> Feb 21 22:49:37 stargazer kernel: [19078.900851] xhci_hcd 0000:08:00.0: Secondary root hub is not suspended
> Feb 21 22:49:37 stargazer kernel: [19078.900857] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16
> Feb 21 22:49:37 stargazer kernel: [19078.900860] dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -16
> Feb 21 22:49:37 stargazer kernel: [19078.900861] PM: Device 0000:08:00.0 failed to suspend async: error -16
> Feb 21 22:49:37 stargazer kernel: [19079.712140] PM: Some devices failed to suspend, or early wake event detected
> Feb 21 22:49:37 stargazer kernel: [19079.712814] sd 4:0:0:0: [sda] Starting disk
> Feb 21 22:49:37 stargazer kernel: [19079.712913] sd 5:0:0:0: [sdb] Starting disk
> Feb 21 22:49:37 stargazer kernel: [19079.713709] sd 7:0:0:0: [sdc] Starting disk
> Feb 21 22:49:37 stargazer kernel: [19079.713711] sd 9:0:0:0: [sdd] Starting disk
> Feb 21 22:49:37 stargazer kernel: [19079.727074] pata_jmicron 0000:03:00.1: setting latency timer to 64
> Feb 21 22:49:37 stargazer kernel: [19080.031084] ata9: SATA link down (SStatus 0 SControl 370)
> Feb 21 22:49:37 stargazer kernel: [19080.039204] ata7: SATA link down (SStatus 0 SControl 300)
> Feb 21 22:49:37 stargazer kernel: [19080.063188] ata11: SATA link down (SStatus 0 SControl 300)
> Feb 21 22:49:37 stargazer kernel: [19080.063295] ata12: SATA link down (SStatus 0 SControl 300)
> Feb 21 22:49:37 stargazer kernel: [19080.203250] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> Feb 21 22:49:37 stargazer kernel: [19080.204290] ata3.00: configured for UDMA/100
> Feb 21 22:49:37 stargazer kernel: [19080.219239] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> Feb 21 22:49:37 stargazer kernel: [19080.222949] ata4.00: configured for UDMA/100
> Feb 21 22:49:37 stargazer kernel: [19080.291235] firewire_core 0000:0c:03.0: rediscovered device fw0
> Feb 21 22:49:37 stargazer kernel: [19081.761287] PM: resume of devices complete after 2047.806 msecs
> Feb 21 22:49:37 stargazer kernel: [19081.761669] PM: Finishing wakeup.
> Feb 21 22:49:37 stargazer kernel: [19081.761670] Restarting tasks ... done.
>
>
> lspci P55
> 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
> 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
> 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
> 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
> 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
> 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
> 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
> 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
> 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
> 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
> 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
> 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
> 00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
> 00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 (rev 05)
> 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
> 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 05)
> 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
> 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
> 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
> 01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
> 03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
> 03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
> 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
> 06:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 07:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 07:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 07:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 07:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 08:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
> 09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 10)
> 0c:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
> 3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
> 3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
> 3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
> 3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
> 3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
> 3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
> 3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
> 3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
> 3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
> 3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
> 3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
> 3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
> 3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
> 3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
> 3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
>
> 08:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
> Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at f7dfe000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
> Vector table: BAR=0 offset=00001000
> PBA: BAR=0 offset=00001080
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis+
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
> Capabilities: [150 v1] Latency Tolerance Reporting
> Max snoop latency: 0ns
> Max no snoop latency: 0ns
> Kernel driver in use: xhci_hcd
>
>
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0003 3.0 root hub
> bcdDevice 3.11
> iManufacturer 3 Linux 3.11.0-19-generic xhci_hcd
> iProduct 2 xHCI Host Controller
> iSerial 1 0000:08:00.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 31
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> bMaxBurst 0
> Hub Descriptor:
> bLength 12
> bDescriptorType 42
> nNbrPorts 2
> wHubCharacteristic 0x0009
> Per-port power switching
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> bHubDecLat 0.0 micro seconds
> wHubDelay 0 nano seconds
> DeviceRemovable 0x00
> Hub Port Status:
> Port 1: 0000.02a0 5Gbps power Rx.Detect
> Port 2: 0000.02a0 5Gbps power Rx.Detect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 15
> bNumDeviceCaps 1
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x02
> wSpeedsSupported 0x0008
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 3
> Lowest fully-functional device speed is SuperSpeed (5Gbps)
> bU1DevExitLat 0 micro seconds
> bU2DevExitLat 0 micro seconds
> Device Status: 0x0001
> Self Powered
> lspci Sandybridge
> 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
> 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
> 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
> 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
> 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
> 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
> 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
> 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b4)
> 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
> 00:1f.0 ISA bridge: Intel Corporation Q67 Express Chipset Family LPC Controller (rev 04)
> 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)
> 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
> 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2)
> 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
> 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
>
> 03:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
> Subsystem: Device [1b5b:8005]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fb000000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
> Vector table: BAR=0 offset=00001000
> PBA: BAR=0 offset=00001080
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis+
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
> Capabilities: [150 v1] Latency Tolerance Reporting
> Max snoop latency: 0ns
> Max no snoop latency: 0ns
> Kernel driver in use: xhci_hcd
>
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 3
> bMaxPacketSize0 9
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0003 3.0 root hub
> bcdDevice 3.02
> iManufacturer 3 Linux 3.2.0-60-generic xhci_hcd
> iProduct 2 xHCI Host Controller
> iSerial 1 0000:03:00.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 31
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> bMaxBurst 0
> Hub Descriptor:
> bLength 12
> bDescriptorType 42
> nNbrPorts 2
> wHubCharacteristic 0x0009
> Per-port power switching
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> bHubDecLat 0.0 micro seconds
> wHubDelay 0 nano seconds
> DeviceRemovable 0x00
> Hub Port Status:
> Port 1: 0000.02a0 5Gbps power Rx.Detect
> Port 2: 0000.02a0 5Gbps power Rx.Detect
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 15
> bNumDeviceCaps 1
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> Latency Tolerance Messages (LTM) Supported
> wSpeedsSupported 0x0008
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 3
> Lowest fully-functional device speed is SuperSpeed (5Gbps)
> bU1DevExitLat 0 micro seconds
> bU2DevExitLat 0 micro seconds
> Device Status: 0x0001
> Self Powered
>
> Bus 004 Device 003: ID 174c:5106 ASMedia Technology Inc. Transcend StoreJet 25M3
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x174c ASMedia Technology Inc.
> idProduct 0x5106 Transcend StoreJet 25M3
> bcdDevice 0.01
> iManufacturer 2 ASMedia
> iProduct 3 AS2105
> iSerial 1 WD-WXL1E61JNVH2
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 44
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xc0
> Self Powered
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8 Mass Storage
> bInterfaceSubClass 6 SCSI
> bInterfaceProtocol 80 Bulk-Only
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 22
> bNumDeviceCaps 2
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> Latency Tolerance Messages (LTM) Supported
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 10 micro seconds
> bU2DevExitLat 2047 micro seconds
> Device Status: 0x0001
> Self Powered
> Bus 004 Device 002: ID 4971:1012 SimpleTech
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x4971 SimpleTech
> idProduct 0x1012
> bcdDevice 0.00
> iManufacturer 10 HGST
> iProduct 11 Touro Mobile Pro
> iSerial 3 21001302020B00000043
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 44
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xc0
> Self Powered
> MaxPower 2mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8 Mass Storage
> bInterfaceSubClass 6 SCSI
> bInterfaceProtocol 80 Bulk-Only
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 15
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 42
> bNumDeviceCaps 3
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> Latency Tolerance Messages (LTM) Supported
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 10 micro seconds
> bU2DevExitLat 32 micro seconds
> Container ID Device Capability:
> bLength 20
> bDescriptorType 16
> bDevCapabilityType 4
> bReserved 0
> ContainerID {00010203-0405-0607-0800-000000000000}
> Device Status: 0x0001
> Self Powered
> Bus 004 Device 004: ID 0781:b6ba SanDisk Corp.
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x0781 SanDisk Corp.
> idProduct 0xb6ba
> bcdDevice 1.24
> iManufacturer 1 SanDisk
> iProduct 2 USB3.0 Card Reader
> iSerial 3 31229000325
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 44
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 4 SDDR-289
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 200mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8 Mass Storage
> bInterfaceSubClass 6 SCSI
> bInterfaceProtocol 80 Bulk-Only
> iInterface 5 Bulk-In, Bulk-Out, Interface
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 3
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 3
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 22
> bNumDeviceCaps 2
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000002
> Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> Latency Tolerance Messages (LTM) Supported
> wSpeedsSupported 0x000e
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 10 micro seconds
> bU2DevExitLat 1023 micro seconds
> Device Status: 0x0000
> (Bus Powered)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
