On Fri, 14 Mar 2014, Amit Virdi wrote: > Felipe, Alan, > > On 2/25/2014 10:43 AM, Amit Virdi wrote: > > ccing: Felipe Balbi, Alen Stern > > > > On 2/24/2014 3:55 PM, Amit VIRDI wrote: > >> Interrupt endpoints behave quite similar to the bulk endpoints with the > >> difference that the endpoints expect data sending/reception request at > >> particular intervals till the whole data has not been transmitted. > >> > >> The interrupt EP support is added to gadget zero. A new alternate > >> setting (=2) > >> has been added. It has 6 endpoints (2-BULK, 2-ISOC, 2-INTERRUPT). The > >> default > >> parameters are set as: > >> bInterval: 4 > >> wMaxPacketSize: 1024 > >> However, the same can be overridden through the module parameter > >> interface. > >> > >> The code is tested for HS and SS on a platform having DWC3 controller. > >> > >> Signed-off-by: Amit Virdi <amit.virdi@xxxxxx> I'm sorry, I simply have not had time to look at either of these patches. The basic idea is okay; there's no good reason not to have testing available for interrupt endpoints. What happens if you try to run this gadget but the UDC can't provide more than 4 endpoints? Would it make more sense to have the new altsetting provide only the two interrupt endpoints? Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
