On 03/14/2014 12:38 PM, Kishon Vijay Abraham I wrote:
> Hi Roger,
>
> On Friday 07 March 2014 06:39 PM, Roger Quadros wrote:
>> Add nodes for the Super Speed USB controllers, omap-control-usb,
>> USB2 PHY and USB3 PHY devices.
>>
>> Remove ocp2scp1 address space from hwmod data as it is
>> now provided via device tree.
>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>> arch/arm/boot/dts/dra7.dtsi | 110 ++++++++++++++++++++++++++++++
>> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 10 ---
>> 2 files changed, 110 insertions(+), 10 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
>> index 597979b..1e73900 100644
>> --- a/arch/arm/boot/dts/dra7.dtsi
>> +++ b/arch/arm/boot/dts/dra7.dtsi
>> @@ -811,6 +811,116 @@
>> clocks = <&sata_ref_clk>;
>> ti,hwmods = "sata";
>> };
>> +
>> + omap_control_usb2phy1: control-phy@4a002300 {
>> + compatible = "ti,control-phy-usb2";
>> + reg = <0x4a002300 0x4>;
>> + reg-names = "power";
>> + };
>> +
>> + omap_control_usb3phy1: control-phy@4a002370 {
>> + compatible = "ti,control-phy-pipe3";
>> + reg = <0x4a002370 0x4>;
>> + reg-names = "power";
>> + };
>> +
>> + omap_control_usb2phy2: control-phy@0x4a002e74 {
>> + compatible = "ti,control-phy-usb2-dra7";
>> + reg = <0x4a002e74 0x4>;
>> + reg-names = "power";
>> + };
>> +
>> + /* OCP2SCP1 */
>> + ocp2scp@4a080000 {
>> + compatible = "ti,omap-ocp2scp";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + reg = <0x4a080000 0x20>;
>> + ti,hwmods = "ocp2scp1";
>> +
>> + usb2_phy1: phy@4a084000 {
>> + compatible = "ti,omap-usb2";
>> + reg = <0x4a084000 0x400>;
>> + ctrl-module = <&omap_control_usb2phy1>;
>> + clocks = <&usb_phy1_always_on_clk32k>,
>> + <&usb_otg_ss1_refclk960m>;
>> + clock-names = "wkupclk",
>> + "refclk";
>> + #phy-cells = <0>;
>> + };
>> +
>> + usb2_phy2: phy@4a085000 {
>> + compatible = "ti,omap-usb2";
>> + reg = <0x4a085000 0x400>;
>> + ctrl-module = <&omap_control_usb2phy2>;
>> + clocks = <&usb_phy2_always_on_clk32k>,
>> + <&usb_otg_ss2_refclk960m>;
>> + clock-names = "wkupclk",
>> + "refclk";
>> + #phy-cells = <0>;
>> + };
>> +
>> + usb3_phy1: phy@4a084400 {
>> + compatible = "ti,omap-usb3";
>> + reg = <0x4a084400 0x80>,
>> + <0x4a084800 0x64>,
>> + <0x4a084c00 0x40>;
>> + reg-names = "phy_rx", "phy_tx", "pll_ctrl";
>> + ctrl-module = <&omap_control_usb3phy1>;
>> + clocks = <&usb_phy3_always_on_clk32k>,
>> + <&sys_clkin1>,
>> + <&usb_otg_ss1_refclk960m>,
>> + <&dpll_core_h13x2_ck>;
>> + clock-names = "wkupclk",
>> + "sysclk",
>> + "refclk",
>> + "optclk";
>
> Do we use this 'optclk' in driver?
No we don't. Still the device seems to work without it.
This is supposed to be USB_LFPS_TX_GFCLK or USB3PHY_REF_CLK.
Any idea why it works without that on OMAP5 as well?
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
