Hi Roger,
On Friday 07 March 2014 06:39 PM, Roger Quadros wrote:
Add nodes for the Super Speed USB controllers, omap-control-usb,
USB2 PHY and USB3 PHY devices.
Remove ocp2scp1 address space from hwmod data as it is
now provided via device tree.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
arch/arm/boot/dts/dra7.dtsi | 110 ++++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 10 ---
2 files changed, 110 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 597979b..1e73900 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -811,6 +811,116 @@
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
};
+
+ omap_control_usb2phy1: control-phy@4a002300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usb3phy1: control-phy@4a002370 {
+ compatible = "ti,control-phy-pipe3";
+ reg = <0x4a002370 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usb2phy2: control-phy@0x4a002e74 {
+ compatible = "ti,control-phy-usb2-dra7";
+ reg = <0x4a002e74 0x4>;
+ reg-names = "power";
+ };
+
+ /* OCP2SCP1 */
+ ocp2scp@4a080000 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x4a080000 0x20>;
+ ti,hwmods = "ocp2scp1";
+
+ usb2_phy1: phy@4a084000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a084000 0x400>;
+ ctrl-module = <&omap_control_usb2phy1>;
+ clocks = <&usb_phy1_always_on_clk32k>,
+ <&usb_otg_ss1_refclk960m>;
+ clock-names = "wkupclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+
+ usb2_phy2: phy@4a085000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a085000 0x400>;
+ ctrl-module = <&omap_control_usb2phy2>;
+ clocks = <&usb_phy2_always_on_clk32k>,
+ <&usb_otg_ss2_refclk960m>;
+ clock-names = "wkupclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+
+ usb3_phy1: phy@4a084400 {
+ compatible = "ti,omap-usb3";
+ reg = <0x4a084400 0x80>,
+ <0x4a084800 0x64>,
+ <0x4a084c00 0x40>;
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_usb3phy1>;
+ clocks = <&usb_phy3_always_on_clk32k>,
+ <&sys_clkin1>,
+ <&usb_otg_ss1_refclk960m>,
+ <&dpll_core_h13x2_ck>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk",
+ "optclk";
Do we use this 'optclk' in driver?
-Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
