> > > > I did backport those patches to 3.13.4 but it does not work. Here you can > find a log http://dpaste.com/hold/1656798/ generated by this dts: > > &usdhc3 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usdhc3_1>; > bus-width = <8>; > non-removable; > status = "okay"; > }; > > &usbh1 { > status = "okay"; > }; > > &usbh2 { > pinctrl-names = "idle", "active"; > pinctrl-0 = <&pinctrl_usbh2_1>; > pinctrl-1 = <&pinctrl_usbh2_2>; > osc-clkgate-delay = <0x3>; > status = "okay"; > }; > > &usbh3 { > pinctrl-names = "idle", "active"; > pinctrl-0 = <&pinctrl_usbh3_1>; > pinctrl-1 = <&pinctrl_usbh3_2>; > osc-clkgate-delay = <0x3>; > status = "okay"; > }; > > &fec { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_enet_4>; > phy-mode = "mii"; > status = "okay"; > }; > - Make sure the hsic data and strobe pin have never used by others. - Make sure the above pins have correct pinmux configuration - Make sure the above pins haven't been touched by others after power up, including bootload. Peter ��.n��������+%������w��{.n�����{���)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
