Hi Mark,
On Fri, Jan 24, 2014 at 9:50 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
>> +
>> + regulators {
>> + compatible = "simple-bus";
>
> This is _not_ a simple bus. It doesn't have the required ranges
> property.
>
> Why do these need to be in a regulators container node? We don't group
> dma controllers under a dmas node, or uarts under a uarts node.
It seems we have this same issue on several imx6 dts files.
Would the below address your suggestion?
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-
index e75e11b..ba35560 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -15,33 +15,29 @@
reg = <0x10000000 0x40000000>;
};
- regulators {
- compatible = "simple-bus";
-
- reg_usb_otg_vbus: usb_otg_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
+ reg_usb_otg_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
- reg_usb_h1_vbus: usb_h1_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 29 0>;
- enable-active-high;
- };
+ reg_usb_h1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 29 0>;
+ enable-active-high;
+ };
- reg_audio: wm8962_supply {
- compatible = "regulator-fixed";
- regulator-name = "wm8962-supply";
- gpio = <&gpio4 10 0>;
- enable-active-high;
- };
+ reg_audio: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply";
+ gpio = <&gpio4 10 0>;
+ enable-active-high;
};
gpio-keys {
If so, I will prepare some patches to update other dts files.
Thanks,
Fabio Estevam
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
