On 2014-01-09 00:17, Greg KH wrote:
On Wed, Jan 08, 2014 at 10:45:43PM +0700, Lars Melin wrote:
On 2014-01-02 23:59, Dan Williams wrote:
On Sun, 2013-12-29 at 15:35 +0700, Lars Melin wrote:
On 2013-12-29 00:55, Greg KH wrote:
On Sat, Dec 28, 2013 at 02:13:08PM +0000, thomas.takacs.aliz@xxxxxxxxx wrote:
Hi,
I've seen this message: tell linux-usb... to add your device to a proper device.
My USB modem is Alcatel One Touch X080C.
Please kindly add it or inform me how can I fix it.
What is the full message that is printed out? What is the vendor and
device id of this device? You are using the module parameters to add a
device id to the usb-serial module, we can add the id to the proper
driver if we know the ids of it.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Alcatel X085C 1bbb:0012
%DEVICE1BBB0012% = Modem6k, USB\VID_1BBB&PID_0012&MI_00
%DEVICE1BBB0012% = OEMportInstall6k, USB\VID_1BBB&PID_0012&MI_01
%DEVICE1BBB0012% = OEMportInstall6k, USB\VID_1BBB&PID_0012&MI_02
%DEVICE1BBB0012% = OEMportInstallSound, USB\VID_1BBB&PID_0012&MI_03
The "6k" indicates that it's likely a Qualcomm-based device like other
Alcatel/TCT. I would add the Modem, Service, and AT ports to the
'option' driver using USB inteface numbers (eg,
USB_DEVICE_INTERFACE_NUMBER using the MI_0x number). Don't bind the
"Voice" port since it's likely not a serial port.
DEVICE1BBB0012 = "ALCATEL CDMA Modem USB Modem"
DEVICE1BBB0012 = "ALCATEL CDMA Modem Service Port"
DEVICE1BBB0012 = "ALCATEL CDMA Modem AT Port"
DEVICE1BBB0012 = "ALCATEL CDMA Modem Voice Port"
Alcatel X080C 1bbb:00ca
%DEVICE1BBB00CA% = Modem6k, USB\VID_1BBB&PID_00CA&MI_00
%DEVICE1BBB00CA% = OEMportInstall6k, USB\VID_1BBB&PID_00CA&MI_01
%DEVICE1BBB00CA% = OEMportInstall6k, USB\VID_1BBB&PID_00CA&MI_02
%DEVICE1BBB00CA% = OEMportInstallSound, USB\VID_1BBB&PID_00CA&MI_03
DEVICE1BBB00CA = "Modem X080C CDMA Modem USB Modem"
DEVICE1BBB00CA = "Modem X080C CDMA Modem Service Port" (Diag)
DEVICE1BBB00CA = "Modem X080C CDMA Modem AT Port"
DEVICE1BBB00CA = "Modem X080C CDMA Modem Voice Port"
Same here. Bind 'option' to the device's Modem, Service, and AT ports
by USB interface number but leave Voice alone.
Dan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
The Voice Port is afaik serialised PCM data and the interface is present in
other option supported
Alcatel dongles made by T&A Mobile Phones without being blacklisted.
It's up to you or Greg K-H to decide, the info from Windows .inf file I
posted above was in response
to his request for more info which the reporter couldn't provide.
Can you convert the above information into a patch for the option driver
that people could test out and I could possibly apply?
thanks,
greg k-h
Sorry, no I can't at the moment. If I could then you would had got a
patch instead of info only.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
