Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.
This should avoid un-necessary clk_get failure messages that were
observed earlier.
Be more strict and always fail on clk_get() error.
CC: Lee Jones <lee.jones@xxxxxxxxxx>
CC: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/mfd/omap-usb-host.c | 93 +++++++++++++++++++++++++++++++--------------
1 file changed, 64 insertions(+), 29 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 1c9bca2..7202cc6 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -92,7 +92,6 @@
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
-
struct usbhs_hcd_omap {
int nports;
struct clk **utmi_clk;
@@ -665,22 +664,41 @@ static int usbhs_omap_probe(struct platform_device *pdev)
goto err_mem;
}
- need_logic_fck = false;
+ /* Set all clocks as invalid to begin with */
+ omap->ehci_logic_fck = omap->init_60m_fclk = ERR_PTR(-EINVAL);
+ omap->utmi_p1_gfclk = omap->utmi_p2_gfclk = ERR_PTR(-EINVAL);
+ omap->xclk60mhsp1_ck = omap->xclk60mhsp2_ck = ERR_PTR(-EINVAL);
+
for (i = 0; i < omap->nports; i++) {
- if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
- is_ehci_hsic_mode(i))
- need_logic_fck |= true;
+ omap->utmi_clk[i] = ERR_PTR(-EINVAL);
+ omap->hsic480m_clk[i] = ERR_PTR(-EINVAL);
+ omap->hsic60m_clk[i] = ERR_PTR(-EINVAL);
}
- omap->ehci_logic_fck = ERR_PTR(-EINVAL);
- if (need_logic_fck) {
- omap->ehci_logic_fck = devm_clk_get(dev, "ehci_logic_fck");
- if (IS_ERR(omap->ehci_logic_fck)) {
- ret = PTR_ERR(omap->ehci_logic_fck);
- dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
+ /* for OMAP3 i.e. USBHS REV1 */
+ if (omap->usbhs_rev == OMAP_USBHS_REV1) {
+ need_logic_fck = false;
+ for (i = 0; i < omap->nports; i++) {
+ if (is_ehci_phy_mode(pdata->port_mode[i]) ||
+ is_ehci_tll_mode(pdata->port_mode[i]) ||
+ is_ehci_hsic_mode(pdata->port_mode[i]))
+
+ need_logic_fck |= true;
+ }
+
+ if (need_logic_fck) {
+ omap->ehci_logic_fck = clk_get(dev, "usbhost_120m_fck");
+ if (IS_ERR(omap->ehci_logic_fck)) {
+ ret = PTR_ERR(omap->ehci_logic_fck);
+ dev_err(dev, "usbhost_120m_fck failed:%d\n",
+ ret);
+ goto err_mem;
+ }
}
+ goto initialize;
}
+ /* for OMAP4+ i.e. USBHS REV2+ */
omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_gfclk)) {
ret = PTR_ERR(omap->utmi_p1_gfclk);
@@ -728,54 +746,71 @@ static int usbhs_omap_probe(struct platform_device *pdev)
* them
*/
omap->utmi_clk[i] = devm_clk_get(dev, clkname);
- if (IS_ERR(omap->utmi_clk[i]))
- dev_dbg(dev, "Failed to get clock : %s : %ld\n",
- clkname, PTR_ERR(omap->utmi_clk[i]));
+ if (IS_ERR(omap->utmi_clk[i])) {
+ ret = PTR_ERR(omap->utmi_clk[i]);
+ dev_err(dev, "Failed to get clock : %s : %d\n",
+ clkname, ret);
+ goto err_mem;
+ }
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic480m_p%d_clk", i + 1);
omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
- if (IS_ERR(omap->hsic480m_clk[i]))
- dev_dbg(dev, "Failed to get clock : %s : %ld\n",
- clkname, PTR_ERR(omap->hsic480m_clk[i]));
+ if (IS_ERR(omap->hsic480m_clk[i])) {
+ ret = PTR_ERR(omap->hsic480m_clk[i]);
+ dev_err(dev, "Failed to get clock : %s : %d\n",
+ clkname, ret);
+ goto err_mem;
+ }
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic60m_p%d_clk", i + 1);
omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
- if (IS_ERR(omap->hsic60m_clk[i]))
- dev_dbg(dev, "Failed to get clock : %s : %ld\n",
- clkname, PTR_ERR(omap->hsic60m_clk[i]));
+ if (IS_ERR(omap->hsic60m_clk[i])) {
+ ret = PTR_ERR(omap->hsic60m_clk[i]);
+ dev_err(dev, "Failed to get clock : %s : %d\n",
+ clkname, ret);
+ goto err_mem;
+ }
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
- /* for OMAP3, clk_set_parent fails */
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->xclk60mhsp1_ck);
- if (ret != 0)
- dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
+ if (ret != 0) {
+ dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
ret);
+ goto err_mem;
+ }
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->init_60m_fclk);
- if (ret != 0)
- dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
+ if (ret != 0) {
+ dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
ret);
+ goto err_mem;
+ }
}
if (is_ehci_phy_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->xclk60mhsp2_ck);
- if (ret != 0)
- dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
+ if (ret != 0) {
+ dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
ret);
+ goto err_mem;
+ }
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->init_60m_fclk);
- if (ret != 0)
- dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
+ if (ret != 0) {
+ dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
ret);
+ goto err_mem;
+ }
}
+initialize:
omap_usbhs_init(dev);
if (dev->of_node) {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
