Hi Benoit & Tony, This patchset brings up USB Host ports and Ethernet port on the OMAP5 uEVM board. It depends on the TI Clock DT conversion patches [1] and is based on 3.13-rc7 [1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895 NOTE: I've tested this only on the OMAP5 uEVM board. Since the patchset changes could affect OMAP3/4, it must be verified at least on a Beagleboard and a Panda board before being pulled in. I request someone to verify this on OMAP3/4 since I don't have access to those boards at the moment. Thanks. Changelog: v5: - Expose all clocks in the DT binding document for mfd:omap-usb-host and mfd:omap-usb-tll v4: - Updated DT binding document for clock binding v3: - Rebased on top of 3.13-rc7 cheers, -roger Roger Quadros (9): mfd: omap-usb-host: Use resource managed clk_get() mfd: omap-usb-host: Get clocks based on hardware revision mfd: omap-usb-host: Update DT clock binding information mfd: omap-usb-tll: Update DT clock binding information ARM: dts: omap4: Update omap-usb-host node ARM: dts: omap5: Update omap-usb-host node ARM: dts: omap4-panda: Provide USB PHY clock ARM: dts: omap5-uevm: Provide USB PHY clock ARM: OMAP2+: Remove legacy_init_ehci_clk() .../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++ .../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++ arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +- arch/arm/boot/dts/omap4.dtsi | 6 + arch/arm/boot/dts/omap5-uevm.dts | 8 +- arch/arm/boot/dts/omap5.dtsi | 6 + arch/arm/mach-omap2/pdata-quirks.c | 16 -- drivers/mfd/omap-usb-host.c | 172 ++++++++++----------- 8 files changed, 128 insertions(+), 121 deletions(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
