On Wed, Jan 08, 2014 at 05:06:20PM +0800, Li Jun wrote:
> Add OTG HNP and SRP operation functions implementation:
> - charge vbus
> - drive vbus
> - connection signaling
> - drive sof
> - start data pulse
> - add fsm timer
> - delete fsm timer
> - start host
> - start gadget
>
> Signed-off-by: Li Jun <b47624@xxxxxxxxxxxxx>
> ---
> drivers/usb/chipidea/bits.h | 11 ++
> drivers/usb/chipidea/otg_fsm.c | 311 ++++++++++++++++++++++++++++++++++++++++
> drivers/usb/chipidea/otg_fsm.h | 8 +
> 3 files changed, 330 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
> index a857131..4347414 100644
> --- a/drivers/usb/chipidea/bits.h
> +++ b/drivers/usb/chipidea/bits.h
> @@ -44,9 +44,14 @@
> #define DEVICEADDR_USBADR (0x7FUL << 25)
>
> /* PORTSC */
> +#define PORTSC_CCS BIT(0)
> +#define PORTSC_CSC BIT(1)
> +#define PORTSC_PEC BIT(3)
> +#define PORTSC_OCC BIT(5)
They are not alignment at my mutt, maybe it is my editor problem.
Please make sure they are alignment with below lines.
> #define PORTSC_FPR BIT(6)
> #define PORTSC_SUSP BIT(7)
> #define PORTSC_HSP BIT(9)
> +#define PORTSC_PP BIT(12)
> #define PORTSC_PTC (0x0FUL << 16)
> #define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23))
> /* PTS and PTW for non lpm version only */
> @@ -55,6 +60,9 @@
> #define PORTSC_PTW BIT(28)
> #define PORTSC_STS BIT(29)
>
> +#define PORTSC_W1C_BITS \
> + (PORTSC_CSC | PORTSC_PEC | PORTSC_OCC)
> +
> /* DEVLC */
> #define DEVLC_PSPD (0x03UL << 25)
> #define DEVLC_PSPD_HS (0x02UL << 25)
> @@ -69,7 +77,10 @@
> #define PTS_HSIC 4
>
> /* OTGSC */
> +#define OTGSC_VD BIT(0)
> +#define OTGSC_VC BIT(1)
> #define OTGSC_IDPU BIT(5)
> +#define OTGSC_HADP BIT(6)
> #define OTGSC_ID BIT(8)
> #define OTGSC_AVV BIT(9)
> #define OTGSC_ASV BIT(10)
> diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
> index 1f8907d..31a046d 100644
> --- a/drivers/usb/chipidea/otg_fsm.c
> +++ b/drivers/usb/chipidea/otg_fsm.c
> @@ -19,12 +19,322 @@
> #include <linux/usb/otg-fsm.h>
> #include <linux/usb/gadget.h>
> #include <linux/usb/chipidea.h>
> +#include <linux/regulator/consumer.h>
>
> #include "ci.h"
> #include "bits.h"
> #include "otg.h"
> #include "otg_fsm.h"
>
> +static struct list_head active_timers;
> +
> +#define HA_DATA_PULSE 1
> +
> +/* FSM timers */
> +struct ci_otg_fsm_timer *a_wait_vrise_tmr, *a_wait_vfall_tmr, *a_wait_bcon_tmr,
> + *a_aidl_bdis_tmr, *a_bidl_adis_tmr, *b_ase0_brst_tmr,
> + *b_se0_srp_tmr, *b_srp_fail_tmr, *b_data_pulse_tmr;
> +
> +/* Add timer to timer list */
> +void ci_otg_add_timer(struct ci_hdrc *ci, struct ci_otg_fsm_timer *gtimer)
static?
> +{
> + struct ci_otg_fsm_timer *timer = gtimer;
> + struct ci_otg_fsm_timer *tmp_timer;
> +
> + /* Check if the timer is already in the active list,
> + * if so update timer count
> + */
> + list_for_each_entry(tmp_timer, &active_timers, list)
> + if (tmp_timer == timer) {
> + timer->count = timer->expires;
> + return;
> + }
> +
> + timer->count = timer->expires;
> + list_add_tail(&timer->list, &active_timers);
> +
> + /* enable 1ms irq in otgsc */
> + if (!(hw_read(ci, OP_OTGSC, OTGSC_1MSIE))) {
> + hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS | OTGSC_1MSIE,
> + OTGSC_1MSIE);
> + }
> +}
> +
> +static struct ci_otg_fsm_timer *ci_otg_get_timer(enum otg_fsm_timer t)
> +{
> + struct ci_otg_fsm_timer *timer;
> +
> + /* REVISIT: use array of pointers to timers instead */
> + switch (t) {
> + case A_WAIT_VRISE:
> + timer = a_wait_vrise_tmr;
> + break;
> + case A_WAIT_VFALL:
> + timer = a_wait_vfall_tmr;
> + break;
> + case A_WAIT_BCON:
> + timer = a_wait_bcon_tmr;
> + break;
> + case A_AIDL_BDIS:
> + timer = a_aidl_bdis_tmr;
> + break;
> + case A_BIDL_ADIS:
> + timer = a_bidl_adis_tmr;
> + break;
> + case B_ASE0_BRST:
> + timer = b_ase0_brst_tmr;
> + break;
> + case B_SE0_SRP:
> + timer = b_se0_srp_tmr;
> + break;
> + case B_SRP_FAIL:
> + timer = b_srp_fail_tmr;
> + break;
> + default:
> + timer = NULL;
> + }
> +
> + return timer;
> +}
> +
> +static void ci_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
> +{
> + struct ci_otg_fsm_timer *timer;
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + timer = ci_otg_get_timer(t);
> + if (!timer)
> + return;
> +
> + ci_otg_add_timer(ci, timer);
> +}
> +
> +/* Remove timer from the timer list; clear timeout status */
> +void ci_otg_del_timer(struct ci_hdrc *ci, struct ci_otg_fsm_timer *gtimer)
static?
> +{
> + struct ci_otg_fsm_timer *timer = gtimer;
> + struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
> + int flag = 0;
> +
> + list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
> + if (tmp_timer == timer) {
> + list_del(&timer->list);
> + flag = 1;
> + }
> +
> + /* disable 1ms irq if there is no any timer active */
> + if ((flag == 1) && list_empty(&active_timers)) {
> + hw_write(ci, OP_OTGSC,
> + OTGSC_INT_STATUS_BITS | OTGSC_1MSIE, 0);
> + }
> +}
> +
> +static void ci_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
> +{
> + struct ci_otg_fsm_timer *timer;
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + timer = ci_otg_get_timer(t);
> + if (!timer)
> + return;
> +
> + ci_otg_del_timer(ci, timer);
> +}
> +
> +/* Reduce timer count by 1, and find timeout conditions.
> + * Called by otg 1ms timer interrupt
> + */
> +int ci_otg_tick_timer(struct ci_hdrc *ci)
> +{
> + struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
> + int expired = 0;
> +
> + list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
> + tmp_timer->count--;
> + /* check if timer expires */
> + if (!tmp_timer->count) {
> + list_del(&tmp_timer->list);
> + tmp_timer->function(ci, tmp_timer->data);
> + expired = 1;
> + }
> + }
> +
> + /* disable 1ms irq if there is no any timer active */
> + if ((expired == 1) && list_empty(&active_timers)) {
> + hw_write(ci, OP_OTGSC,
> + OTGSC_INT_STATUS_BITS | OTGSC_1MSIE, 0);
> + }
> +
> + return expired;
> +}
> +
> +/* -------------------------------------------------------------*/
> +/* Operations that will be called from OTG Finite State Machine */
> +
> +/* Charge vbus for vbus pulsing in SRP */
> +void ci_otg_chrg_vbus(struct otg_fsm *fsm, int on)
> +{
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + if (on)
> + /* stop discharging, start charging */
> + hw_write(ci, OP_OTGSC,
> + OTGSC_INT_STATUS_BITS | OTGSC_VD | OTGSC_VC,
> + OTGSC_VC);
> + else
> + /* stop charging */
> + hw_write(ci, OP_OTGSC,
> + OTGSC_INT_STATUS_BITS | OTGSC_VC, 0);
> +}
> +
> +/* A-device driver vbus, controlled through PP bit in PORTSC */
> +void ci_otg_drv_vbus(struct otg_fsm *fsm, int on)
> +{
> + int ret;
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + if (on) {
> + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
> + PORTSC_PP);
> + if (ci->platdata->reg_vbus) {
> + ret = regulator_enable(ci->platdata->reg_vbus);
> + if (ret) {
> + dev_err(ci->dev,
> + "Failed to enable vbus regulator, ret=%d\n",
> + ret);
> + return;
> + }
> + }
> + /* Disable data pulse irq */
> + hw_write(ci, OP_OTGSC,
> + OTGSC_INT_STATUS_BITS | OTGSC_DPIE, 0);
> + } else {
> + if (ci->platdata->reg_vbus)
> + regulator_disable(ci->platdata->reg_vbus);
> + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 0);
> + }
> +}
> +
> +/*
> + * Control data line through Run Stop bit.
> + */
> +void ci_otg_loc_conn(struct otg_fsm *fsm, int on)
> +{
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + if (on)
> + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
> + else
> + hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
> +}
> +
> +/*
> + * Generate SOF by host. This is controlled through suspend/resume the
> + * port. In host mode, controller will automatically send SOF.
> + * Suspend will block the data on the port.
> + */
> +void ci_otg_loc_sof(struct otg_fsm *fsm, int on)
> +{
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + if (on)
> + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_FPR,
> + PORTSC_FPR);
> + else
> + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_SUSP,
> + PORTSC_SUSP);
> +}
> +
> +/* Start SRP pulsing by data-line pulsing, no v-bus pulsing followed. */
> +void ci_otg_start_pulse(struct otg_fsm *fsm)
> +{
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> +#ifdef HA_DATA_PULSE
> + hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS | OTGSC_HADP,
> + OTGSC_HADP);
> +#else
> + ci_otg_loc_conn(fsm, 1);
> +#endif
> + ci_otg_add_timer(ci, b_data_pulse_tmr);
> +}
> +
> +/*
> + * Here use this chance to enable data pulse irq for A device
> + * in a_idle state since ADP is not supported.
> + */
> +void ci_otg_start_adp_prb(struct otg_fsm *fsm)
> +{
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + /* Clear exsiting DP irq */
> + hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS, OTGSC_DPIS);
> + /* Enable data pulse irq */
> + hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS | OTGSC_DPIE,
> + OTGSC_DPIE);
> +}
> +
> +int ci_otg_start_host(struct otg_fsm *fsm, int on)
> +{
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + mutex_unlock(&fsm->lock);
> + if (on) {
> + if (ci->role != CI_ROLE_HOST) {
> + ci_role_stop(ci);
> + ci_role_start(ci, CI_ROLE_HOST);
> + }
> + } else {
> + if (ci->role == CI_ROLE_HOST) {
> + ci_role_stop(ci);
> + ci_role_start(ci, CI_ROLE_GADGET);
> + }
> + }
Would you add more explanations for above code?
Peter
> + mutex_lock(&fsm->lock);
> + return 0;
> +}
> +
> +int ci_otg_start_gadget(struct otg_fsm *fsm, int on)
> +{
> + struct ci_hdrc *ci = container_of(fsm->otg->gadget,
> + struct ci_hdrc, gadget);
> +
> + mutex_unlock(&fsm->lock);
> + if (on) {
> + if (ci->role == CI_ROLE_GADGET)
> + usb_gadget_vbus_connect(&ci->gadget);
> + } else {
> + if (ci->role == CI_ROLE_GADGET)
> + usb_gadget_vbus_disconnect(&ci->gadget);
> + }
> + mutex_lock(&fsm->lock);
> + return 0;
> +}
> +
> +static struct otg_fsm_ops ci_otg_ops = {
> + .chrg_vbus = ci_otg_chrg_vbus,
> + .drv_vbus = ci_otg_drv_vbus,
> + .loc_conn = ci_otg_loc_conn,
> + .loc_sof = ci_otg_loc_sof,
> + .start_pulse = ci_otg_start_pulse,
> + .start_adp_prb = ci_otg_start_adp_prb,
> +
> + .add_timer = ci_otg_fsm_add_timer,
> + .del_timer = ci_otg_fsm_del_timer,
> +
> + .start_host = ci_otg_start_host,
> + .start_gadget = ci_otg_start_gadget,
> +};
> +
> int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
> {
> if (ci->transceiver == NULL)
> @@ -52,6 +362,7 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
> ci->fsm->otg->phy = ci->transceiver;
> ci->fsm->otg->gadget = &ci->gadget;
> ci->transceiver->state = OTG_STATE_UNDEFINED;
> + ci->fsm->ops = &ci_otg_ops;
>
> mutex_init(&ci->fsm->lock);
>
> diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
> index 1a7ca11..e1b45d7 100644
> --- a/drivers/usb/chipidea/otg_fsm.h
> +++ b/drivers/usb/chipidea/otg_fsm.h
> @@ -11,6 +11,14 @@
> #ifndef __DRIVERS_USB_CHIPIDEA_OTG_FSM_H
> #define __DRIVERS_USB_CHIPIDEA_OTG_FSM_H
>
> +struct ci_otg_fsm_timer {
> + unsigned long expires; /* Number of count increase to timeout */
> + unsigned long count; /* Tick counter */
> + void (*function)(void *, unsigned long); /* Timeout function */
> + unsigned long data; /* Data passed to function */
> + struct list_head list;
> +};
> +
> #ifdef CONFIG_USB_OTG_FSM
>
> int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
> --
> 1.7.8
>
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
