On 01/08/2014 03:49 PM, Arnd Bergmann wrote:
> On Wednesday 08 January 2014 15:39:36 Roger Quadros wrote:
>>> What about the other clocks acquired in drivers/mfd/omap-usb-host.c? Shouldn't
>>> all of those be provided by via the DT phandle?
>>>
>>
>> All those clocks are identically named across the OMAP SoCs and are unique for each
>> SoC, so providing DT phandle for all of them is not required.
>>
>> The init_60m_fclk was renamed to l3init_60m_fclk in OMAP5, and hence the need for
>> this binding.
>
> What do you mean it was renamed? Is it a different version of the omap-usb-host
> device then?
I meant the clock gates name on the SoC was renamed. The omap-usb-host device version
is revised as well.
>>> Should the clk_get be changed to of_clk_get()/of_clk_get_by_name() in the
>>> driver? This would potentially remove the need of the init_60m_fclk name.
>>>
>>
>> If we use of_clk_xxx() then we'll need to update DT nodes for OMAP4 and OMAP3 as
>> well to explicitly provide the clock phandle. For now we make use of the fact that
>> SoC clock data names the clock rightly i.e. "init_60m_fclk".
>
> I'm getting the feeling that init_60m_fclk is not the name of the clock input
> of the omap-usb-host device at all, but rather the name of a signal on the
> omap soc, which would not be an appropriate identifier for the binding.
It is a clock gate defined like so in the DT clock data
on OMAP4
init_60m_fclk: init_60m_fclk {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_usb_m2_ck>;
reg = <0x0104>;
ti,dividers = <1>, <8>;
};
on OMAP5
l3init_60m_fclk: l3init_60m_fclk {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_usb_m2_ck>;
reg = <0x0104>;
ti,dividers = <1>, <8>;
};
So you can see that it is the same thing with a different name.
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
