Hi,
Apologies for the late reply, I wasn't able to access my mail much over
the Christmas break.
On Mon, Dec 23, 2013 at 08:25:49PM +0000, Andreas Larsson wrote:
> This adds an UDC driver for GRUSBDC USB Device Controller cores available in the
> GRLIB VHDL IP core library. The driver only supports DMA mode.
>
> Signed-off-by: Andreas Larsson <andreas@xxxxxxxxxxx>
> ---
>
> Differences since v1:
> - Use hexprint for debug printoutes instead of homemade equivalent
> - Use the dev_* printk variants over the board
> - Get rid of unnecessary casts and includes
> - Use USB_STATE_NOTATTACHED instead of USB_STATE_ATTACHED for clarity
> - Get rid of commented out VERBOSE_DEBUG definition
> - Do not devm-allocate any requests
> - Get rid of unnecessary resqueduling of the workqueue handler
> - Make sure that gadget setup function is called with interrupts disabled
> Differences since v2:
> - Fixed an error printout
> - Got rid of the work queue in favor of threaded interrupts
> Differences since v3:
> - Disable interrupts when locking spinlocks instead of using
> local_irq_save deeper within critical section
> Differences since v4:
> - Set quirk_ep_out_aligned_size
> - Use usb_ep_set_maxpacket_limit
> - Add devicetree documentation
> Differences since v5:
> - Declare unexpected spin_unlock and spin_lock for sparse
> - Fix a bad comment
> - Use ACCESS_ONCE instead of gr_read32 when checking for update of dma descriptor
>
> Documentation/devicetree/bindings/usb/gr-udc.txt | 28 +
> drivers/usb/gadget/Kconfig | 7 +
> drivers/usb/gadget/Makefile | 1 +
> drivers/usb/gadget/gr_udc.c | 2242 ++++++++++++++++++++++
> drivers/usb/gadget/gr_udc.h | 220 +++
> 5 files changed, 2498 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/gr-udc.txt
> create mode 100644 drivers/usb/gadget/gr_udc.c
> create mode 100644 drivers/usb/gadget/gr_udc.h
>
> diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt
> new file mode 100644
> index 0000000..0c5118f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/gr-udc.txt
> @@ -0,0 +1,28 @@
> +USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
> +
> +The GRUSBDC USB Device Controller core is available in the GRLIB VHDL
> +IP core library.
> +
> +Note: In the ordinary environment for the core, a Leon SPARC system,
> +these properties are built from information in the AMBA plug&play.
> +
> +Required properties:
> +
> +- name : Should be "GAISLER_USBDC" or "01_021"
What's this for?
Why is this not matched using a compatible string?
What does "01_021" mean?
> +
> +- reg : Address and length of the register set for the device
> +
> +- interrupts : Interrupt numbers for this device
How many, and what do they correspond to?
> +
> +Optional properties:
> +
> +- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is
> + not present, or for endpoints outside of the array, 1024 is assumed by
> + the driver.
> +
> +- epibufsizes : An array of buffer sizes for IN endpoints. If the property is
> + not present, or for endpoints outside of the array, 1024 is assumed by
> + the driver.
These names are rather opaque. Something like {input,output}-buf-lens
would be far clearer.
How many entries are expected?
A specific driver should have no relevance to the binding. Just say "if
not 1024".
[...]
> +/* Must be called with dev->lock held */
> +static int gr_udc_init(struct gr_udc *dev)
> +{
> + struct device_node *np = dev->dev->of_node;
> + u32 epctrl_val;
> + u32 dmactrl_val;
> + int i;
> + int ret = 0;
> + u32 *bufsizes;
> + u32 bufsize;
> + int len;
> +
> + gr_set_address(dev, 0);
> +
> + INIT_LIST_HEAD(&dev->gadget.ep_list);
> + dev->gadget.speed = USB_SPEED_UNKNOWN;
> + dev->gadget.ep0 = &dev->epi[0].ep;
> +
> + INIT_LIST_HEAD(&dev->ep_list);
> + gr_set_ep0state(dev, GR_EP0_DISCONNECT);
> +
> + bufsizes = (u32 *)of_get_property(np, "epobufsizes", &len);
of_get_property gives you the raw property value bye string, which is
_not_ a u32 pointer -- it's not necessarily the same endianness as the
kernel. Please use an appropriate accessor.
> + len /= sizeof(u32);
> + for (i = 0; i < dev->nepo; i++) {
> + bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024;
You can use of_property_read_u32_index within the loop for this:
if (of_property_read_u32_index(np, "epobufsizes", &bufsize)
bufsize = 1024;
> + ret = gr_ep_init(dev, i, 0, bufsize);
> + if (ret)
> + return ret;
> + }
> +
> + bufsizes = (u32 *)of_get_property(np, "epibufsizes", &len);
> + len /= sizeof(u32);
> + for (i = 0; i < dev->nepi; i++) {
> + bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024;
Likewise here.
[...]
> +static int gr_probe(struct platform_device *ofdev)
> +{
> + struct gr_udc *dev;
> + struct resource *res;
> + struct gr_regs __iomem *regs;
> + int retval;
> + u32 status;
> +
> + dev = devm_kzalloc(&ofdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> + dev->dev = &ofdev->dev;
> +
> + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
> + regs = devm_ioremap_resource(dev->dev, res);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + dev->irq = irq_of_parse_and_map(dev->dev->of_node, 0);
> + if (!dev->irq) {
> + dev_err(dev->dev, "No irq found\n");
> + return -ENODEV;
> + }
The platform_device probing code will have parsed and mapped the irq
already. You can use platform_get_irq(ofdev->dev, 0) here.
Also, naming the platform_device ofdev is confusing. It has nothing to
do with OF, and the more common pdev name would be far clearer.
> +
> + /* Some core configurations has separate irqs for IN and OUT events */
> + dev->irqi = irq_of_parse_and_map(dev->dev->of_node, 1);
> + if (dev->irqi) {
> + dev->irqo = irq_of_parse_and_map(dev->dev->of_node, 2);
> + if (!dev->irqo) {
> + dev_err(dev->dev, "Found irqi but not irqo\n");
> + return -ENODEV;
> + }
> + }
Likewise here you can use platform_get_irq.
[...]
> +static struct of_device_id gr_match[] = {
> + {.name = "GAISLER_USBDC"},
> + {.name = "01_021"},
> + {},
This seems extremely odd to me. I think a compatible string would be far
preferable.
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
