Add helper function for direct baud-rate encoding. Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx> --- drivers/usb/serial/pl2303.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 44f4b546adeb..b4e72979def7 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -339,6 +339,18 @@ static speed_t pl2303_get_supported_baud_rate(speed_t baud) return baud; } +/* + * NOTE: If unsupported baud rates are set directly, the PL2303 seems to + * use 9600 baud. + */ +static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4], + speed_t baud) +{ + put_unaligned_le32(baud, buf); + + return baud; +} + static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4], speed_t baud) { @@ -376,16 +388,12 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty, if (spriv->type->max_baud_rate) baud = min_t(speed_t, baud, spriv->type->max_baud_rate); - /* - * Set baud rate to nearest supported value. - * - * NOTE: If unsupported values are set directly, the PL2303 seems to - * use 9600 baud. - */ + + /* Set baud rate to nearest supported value. */ baud = pl2303_get_supported_baud_rate(baud); if (baud <= 115200) - put_unaligned_le32(baud, buf); + baud = pl2303_encode_baud_rate_direct(buf, baud); else baud = pl2303_encode_baud_rate_divisor(buf, baud); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html