Rename baud-rate encoding function to match tty naming.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/pl2303.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 35aa4973a137..8d792afbe27f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -311,7 +311,7 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
return retval;
}
-static void pl2303_encode_baudrate(struct tty_struct *tty,
+static void pl2303_encode_baud_rate(struct tty_struct *tty,
struct usb_serial_port *port,
u8 buf[4])
{
@@ -335,7 +335,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
if (!baud)
return;
- /* Set baudrate to nearest supported value */
+ /* Set baud rate to nearest supported value */
for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
if (baud_sup[i] > baud)
break;
@@ -461,7 +461,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
/* For reference buf[0]:buf[3] baud rate value */
- pl2303_encode_baudrate(tty, port, &buf[0]);
+ pl2303_encode_baud_rate(tty, port, &buf[0]);
/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
