Introduce Meson as build framework for building libtraceevent. This
lives besides the Makefiles until all the expected initial fallouts
have been dealed with.
The build steps are:
# configure using .build as build directory and install destination
# /tmp/test
meson --prefix=/tmp/libtraceevent .build
# trigger the build
ninja -C .build
# install the library
ninja -C .build install
In case you want to build/install the documentation the setup is
meson -Ddocs-build=true .build
Signed-off-by: Daniel Wagner <dwagner@xxxxxxx>
---
I had to fallback to use a workaround to install the man pages to the
correct directory. Meson insistet to install them into subdirs and
failed to install them when I forced Meson not to do this. I am sure I
am doing something wrong but couldn't figure out what. I think
it's okay to use the workaround until we figured how to do this
'correct'.
Tested this by packaging it up for OpenSUSE and the it looks
reasonable:
https://build.opensuse.org/project/show/home:wagi:branches:devel:tools
v5:
- build unit test only if CUnit is found
- default build target is debug
- do not install man pages into subdirs
v4:
- install man pages to correct section, in this case 3
- run check-doc when building the docs
v3:
- build documentation
- build samples
- changed default install to /usr/local
v2:
- changed include path exported in pkg-config
exports the same paths as per Makefile
v1:
- initial version
Documentation/install-man.sh.in | 15 +++
Documentation/meson.build | 177 ++++++++++++++++++++++++++++++++
include/traceevent/meson.build | 14 +++
meson.build | 55 ++++++++++
meson_options.txt | 20 ++++
plugins/dynamic_list.sh | 14 +++
plugins/meson.build | 44 ++++++++
samples/meson.build | 11 ++
src/meson.build | 37 +++++++
utest/meson.build | 16 +++
10 files changed, 403 insertions(+)
create mode 100755 Documentation/install-man.sh.in
create mode 100644 Documentation/meson.build
create mode 100644 include/traceevent/meson.build
create mode 100644 meson.build
create mode 100644 meson_options.txt
create mode 100755 plugins/dynamic_list.sh
create mode 100644 plugins/meson.build
create mode 100644 samples/meson.build
create mode 100644 src/meson.build
create mode 100644 utest/meson.build
diff --git a/Documentation/install-man.sh.in b/Documentation/install-man.sh.in
new file mode 100755
index 000000000000..8ab2cb982e1d
--- /dev/null
+++ b/Documentation/install-man.sh.in
@@ -0,0 +1,15 @@
+#!/bin/bash
+
+for man in $(find @SRCDIR@ -name '*\.1' -type f); do
+ [ ! -d ${DESTDIR}/@MANDIR@/man1/ ] && install -d ${DESTDIR}/@MANDIR@/man1/
+
+ echo Installing $man to ${DESTDIR}/@MANDIR@/man1/
+ install -m 0644 $man ${DESTDIR}/@MANDIR@/man1/
+done
+
+for man in $(find @SRCDIR@ -name '*\.3' -type f); do
+ [ ! -d ${DESTDIR}/@MANDIR@/man3/ ] && install -d ${DESTDIR}/@MANDIR@/man3/
+
+ echo Installing $man to ${DESTDIR}/@MANDIR@/man3/
+ install -m 0644 $man ${DESTDIR}/@MANDIR@/man3/
+done
diff --git a/Documentation/meson.build b/Documentation/meson.build
new file mode 100644
index 000000000000..097da50857b3
--- /dev/null
+++ b/Documentation/meson.build
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+# input text file: man page section
+sources = {
+ 'libtraceevent.txt': '3',
+ 'libtraceevent-func_apis.txt': '3',
+ 'libtraceevent-commands.txt': '3',
+ 'libtraceevent-cpus.txt': '3',
+ 'libtraceevent-debug.txt': '3',
+ 'libtraceevent-endian_read.txt': '3',
+ 'libtraceevent-event_find.txt': '3',
+ 'libtraceevent-event_get.txt': '3',
+ 'libtraceevent-event_list.txt': '3',
+ 'libtraceevent-event_print.txt': '3',
+ 'libtraceevent-field_find.txt': '3',
+ 'libtraceevent-field_get_val.txt': '3',
+ 'libtraceevent-field_print.txt': '3',
+ 'libtraceevent-field_read.txt': '3',
+ 'libtraceevent-fields.txt': '3',
+ 'libtraceevent-file_endian.txt': '3',
+ 'libtraceevent-filter.txt': '3',
+ 'libtraceevent-func_find.txt': '3',
+ 'libtraceevent-handle.txt': '3',
+ 'libtraceevent-header_page.txt': '3',
+ 'libtraceevent-host_endian.txt': '3',
+ 'libtraceevent-kbuffer-create.txt': '3',
+ 'libtraceevent-kbuffer-read.txt': '3',
+ 'libtraceevent-kbuffer-timestamp.txt': '3',
+ 'libtraceevent-kvm-plugin.txt': '3',
+ 'libtraceevent-log.txt': '3',
+ 'libtraceevent-long_size.txt': '3',
+ 'libtraceevent-page_size.txt': '3',
+ 'libtraceevent-parse_event.txt': '3',
+ 'libtraceevent-parse-files.txt': '3',
+ 'libtraceevent-parse_head.txt': '3',
+ 'libtraceevent-plugins.txt': '3',
+ 'libtraceevent-record_parse.txt': '3',
+ 'libtraceevent-reg_event_handler.txt': '3',
+ 'libtraceevent-reg_print_func.txt': '3',
+ 'libtraceevent-set_flag.txt': '3',
+ 'libtraceevent-strerror.txt': '3',
+ 'libtraceevent-tseq.txt': '3',
+}
+
+#
+# For asciidoc ...
+# -7.1.2, no extra settings are needed.
+# 8.0-, set ASCIIDOC8.
+#
+
+#
+# For docbook-xsl ...
+# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+# 1.69.0, no extra settings are needed?
+# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP?
+# 1.71.1, no extra settings are needed?
+# 1.72.0, set DOCBOOK_XSL_172.
+# 1.73.0-, set ASCIIDOC_NO_ROFF
+#
+
+#
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+#
+
+if get_option('asciidoctor')
+ asciidoc = find_program('asciidoctor')
+ asciidoc_extra = ['-a', 'compat-mode']
+ asciidoc_extra += ['-I.']
+ asciidoc_extra += ['-r', 'asciidoctor-extensions']
+ asciidoc_extra += ['-a', 'mansource=libtraceevent']
+ asciidoc_extra += ['-a', 'manmanual="libtraceevent Manual"']
+ asciidoc_html = 'xhtml5'
+else
+ asciidoc = find_program('asciidoc')
+ asciidoc_extra = ['--unsafe']
+ asciidoc_extra += ['-f', meson.current_source_dir() + '/asciidoc.conf']
+ asciidoc_html = 'xhtml11'
+
+ r = run_command(asciidoc, '--version', check: true)
+ v = r.stdout().strip()
+ if v.version_compare('>=8.0')
+ asciidoc_extra += ['-a', 'asciidoc7compatible']
+ endif
+endif
+
+manpage_xsl = meson.current_source_dir() + '/manpage-normal.xsl'
+
+if get_option('docbook-xls-172')
+ asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+ manpage_xsl = meson.current_source_dir() + '/manpage-1.72.xsl'
+elif get_option('asciidoc-no-roff')
+ # docbook-xsl after 1.72 needs the regular XSL, but will not
+ # pass-thru raw roff codes from asciidoc.conf, so turn them off.
+ asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+endif
+
+xmlto = find_program('xmlto')
+xmlto_extra = []
+
+if get_option('man-bold-literal')
+ xmlto_extra += ['-m ', meson.current_source_dir() + '/manpage-bold-literal.xsl']
+endif
+
+if get_option('docbook-suppress-sp')
+ xmlto_extra += ['-m ', meson.current_source_dir() + '/manpage-suppress-sp.xsl']
+endif
+
+gen = generator(asciidoc,
+ output: '@BASENAME@.xml',
+ arguments: [
+ '-b', 'docbook',
+ '-d', 'manpage',
+ '-a', 'libtraceevent_version=' + meson.project_version(),
+ '-o', '@OUTPUT@']
+ + asciidoc_extra
+ + ['@INPUT@'])
+
+foreach txt, section : sources
+ # build man page(s)
+ xml = gen.process(txt)
+ man = custom_target(txt.underscorify() + '_man',
+ input: xml,
+ output: '@BASENAME@.' + section,
+ command: [xmlto,
+ '-m', manpage_xsl,
+ 'man',
+ '-o', '@OUTPUT@']
+ + xmlto_extra
+ + ['@INPUT@'],
+ build_by_default : true)
+
+ # build html pages
+ custom_target(
+ txt.underscorify() + '_html',
+ input: txt,
+ output: '@BASENAME@.html',
+ command: [asciidoc,
+ '-b', asciidoc_html,
+ '-d', 'manpage',
+ '-a', 'libtraceevent_version=' + meson.project_version(),
+ '-o', '@OUTPUT@']
+ + asciidoc_extra
+ + ['@INPUT@'],
+ install: true,
+ install_dir: htmldir)
+endforeach
+
+# Install path workaround because:
+#
+# - xmlto might generate more than one file and we would to tell meson
+# about those output files. We could figure out which files are generated
+# (see sed match in check-manpages.sh).
+#
+# - The man page generation puts all the generated files under sub dirs
+# and it's not obvious how to tell Meson it should not do this without
+# causing the install step to fail (confusion where the generated files
+# are stored)
+#
+# Thus just use a plain old shell script to move the generated files to the
+# right location.
+
+conf = configuration_data()
+conf.set('SRCDIR', meson.current_build_dir())
+conf.set('MANDIR', mandir)
+configure_file(
+ input: 'install-man.sh.in',
+ output: 'install-man.sh',
+ configuration: conf,
+)
+
+meson.add_install_script(
+ join_paths(meson.current_build_dir(), 'install-man.sh'))
diff --git a/include/traceevent/meson.build b/include/traceevent/meson.build
new file mode 100644
index 000000000000..187b136ed138
--- /dev/null
+++ b/include/traceevent/meson.build
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+headers = [
+ 'event-parse.h',
+ 'event-utils.h',
+ 'kbuffer.h',
+ 'trace-seq.h',
+]
+
+foreach h : headers
+ install_headers(h, subdir : 'traceevent')
+endforeach
diff --git a/meson.build b/meson.build
new file mode 100644
index 000000000000..54621a6d05c4
--- /dev/null
+++ b/meson.build
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+project(
+ 'libtraceevent', ['c'],
+ meson_version: '>= 0.50.0',
+ license: 'LGPL-2.1',
+ version: '1.7.0',
+ default_options: [
+ 'c_std=gnu99',
+ 'buildtype=debug',
+ 'prefix=/usr/local',
+ 'warning_level=1',
+ ]
+)
+
+library_version = meson.project_version()
+
+cunit_dep = dependency('cunit', required : false)
+
+prefixdir = get_option('prefix')
+mandir = join_paths(prefixdir, get_option('mandir'))
+htmldir = join_paths(prefixdir, get_option('htmldir'))
+libdir = join_paths(prefixdir, get_option('libdir'))
+plugindir = get_option('plugindir')
+if plugindir == ''
+ plugindir = join_paths(libdir, 'libtraceevent/plugins')
+endif
+
+add_project_arguments(
+ [
+ '-D_GNU_SOURCE',
+ '-DPLUGIN_DIR="@0@"'.format(plugindir),
+ ],
+ language : 'c',
+)
+
+incdir = include_directories(['include', 'include/traceevent'])
+
+subdir('src')
+subdir('include/traceevent')
+subdir('plugins')
+if cunit_dep.found()
+ subdir('utest')
+endif
+subdir('samples')
+if get_option('docs-build')
+ custom_target('check-doc',
+ output: 'dummy',
+ command : ['check-manpages.sh',
+ meson.current_source_dir() + '/Documentation'],
+ build_by_default : true)
+ subdir('Documentation')
+endif
diff --git a/meson_options.txt b/meson_options.txt
new file mode 100644
index 000000000000..14c6fc0cc36d
--- /dev/null
+++ b/meson_options.txt
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+option('plugindir', type : 'string',
+ description : 'set the plugin dir')
+option('docs-build', type : 'boolean', value : false,
+ description : 'build documentation')
+option('htmldir', type : 'string', value : '',
+ description : 'directory for HTML documentation')
+option('asciidoctor', type : 'boolean', value: false,
+ description : 'use asciidoctor instead of asciidoc')
+option('docbook-xls-172', type : 'boolean', value : false,
+ description : 'enable docbook XLS 172 workaround')
+option('asciidoc-no-roff', type : 'boolean', value : false,
+ description : 'enable no roff workaround')
+option('man-bold-literal', type : 'boolean', value : false,
+ description : 'enable bold literals')
+option('docbook-suppress-sp', type : 'boolean', value : false,
+ description : 'docbook suppress sp')
diff --git a/plugins/dynamic_list.sh b/plugins/dynamic_list.sh
new file mode 100755
index 000000000000..e1480eaa694f
--- /dev/null
+++ b/plugins/dynamic_list.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+symbol_type=$(nm -u -D $@ | awk 'NF>1 {print $1}' | xargs echo "U w W" |
+ tr 'w ' 'W\n' | sort -u | xargs echo)
+
+if [ "$symbol_type" = "U W" ]; then
+ echo '{'
+
+ nm -u -D $@ | awk 'NF>1 {sub("@.*", "", $2); print "\t"$2";"}' |
+ sort -u
+
+ echo '};'
+fi
diff --git a/plugins/meson.build b/plugins/meson.build
new file mode 100644
index 000000000000..f3260b17d69a
--- /dev/null
+++ b/plugins/meson.build
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+plugins = [
+ 'plugin_jbd2.c',
+ 'plugin_hrtimer.c',
+ 'plugin_kmem.c',
+ 'plugin_kvm.c',
+ 'plugin_mac80211.c',
+ 'plugin_sched_switch.c',
+ 'plugin_function.c',
+ 'plugin_futex.c',
+ 'plugin_xen.c',
+ 'plugin_scsi.c',
+ 'plugin_cfg80211.c',
+ 'plugin_tlb.c',
+]
+
+pdeps = []
+foreach plugin : plugins
+ pdeps += library(
+ plugin.replace('.c', ''),
+ plugin,
+ name_prefix: '',
+ version: library_version,
+ dependencies: [libtraceevent_dep],
+ include_directories: [incdir],
+ install: true,
+ install_dir: plugindir)
+endforeach
+
+# perf needs the exported symbol list
+dynamic_list_file = find_program('dynamic_list.sh')
+custom_target(
+ 'dynamic_list',
+ depends: pdeps,
+ input: pdeps,
+ output: 'libtraceevent-dynamic-list',
+ command: [dynamic_list_file, '@INPUT@'],
+ capture: true,
+ build_by_default: true,
+ install: true,
+ install_dir: plugindir)
diff --git a/samples/meson.build b/samples/meson.build
new file mode 100644
index 000000000000..827d044c8720
--- /dev/null
+++ b/samples/meson.build
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+executable(
+ 'test-event',
+ ['test-event.c'],
+ dependencies: libtraceevent_dep,
+ include_directories: [incdir]
+)
+
diff --git a/src/meson.build b/src/meson.build
new file mode 100644
index 000000000000..d9c0bd315735
--- /dev/null
+++ b/src/meson.build
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+sources= [
+ 'event-parse-api.c',
+ 'event-parse.c',
+ 'event-plugin.c',
+ 'kbuffer-parse.c',
+ 'parse-filter.c',
+ 'parse-utils.c',
+ 'tep_strerror.c',
+ 'trace-seq.c',
+]
+
+libtraceevent = library(
+ 'traceevent',
+ sources,
+ version: library_version,
+ include_directories: [incdir],
+ install: true,
+)
+
+pkg = import('pkgconfig')
+pkg.generate(libtraceevent,
+ subdirs: 'traceevent',
+ filebase: meson.project_name(),
+ name: meson.project_name(),
+ version: meson.project_version(),
+ description: 'Manage trace event',
+ url: 'https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/',
+)
+
+libtraceevent_dep = declare_dependency(
+ include_directories: ['.'],
+ link_with: libtraceevent,
+)
diff --git a/utest/meson.build b/utest/meson.build
new file mode 100644
index 000000000000..06eb887e35e6
--- /dev/null
+++ b/utest/meson.build
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2022 Daniel Wagner, SUSE LLC
+
+source = [
+ 'trace-utest.c',
+ 'traceevent-utest.c',
+]
+
+e = executable(
+ 'trace-utest',
+ source,
+ include_directories: [incdir],
+ dependencies: [libtraceevent_dep, cunit_dep])
+
+test('trace-utest', e)
--
2.39.0
|