Linux Tip Commits - Date Index

• Thread Index

• [tip:irq/core] iommu/vt-d: Add name to irq chip
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:irq/core] iommu/amd: Add name to irq chip
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:irq/core] genirq/msi: Prevent overwriting domain name
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:irq/core] x86/apic: Add name to irq chip
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:x86/timers] x86/tsc: Call check_system_tsc_reliable() before unsynchronized_tsc()
  • From: tip-bot for Zhenzhong Duan <tipbot@xxxxxxxxx>
• Re: [tip:sched/core] sched/fair: Spare idle load balancing on nohz_full CPUs
  • From: Frederic Weisbecker <fweisbec@xxxxxxxxx>
• [tip:x86/hyperv] x86/hyperv: Read TSC frequency from a synthetic MSR
  • From: tip-bot for Vitaly Kuznetsov <tipbot@xxxxxxxxx>
• [tip:x86/hyperv] x86/hyperv: Check frequency MSRs presence according to the specification
  • From: tip-bot for Vitaly Kuznetsov <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/fair: Spare idle load balancing on nohz_full CPUs
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/refcount: Create unchecked atomic_t implementation
  • From: tip-bot for Kees Cook <tipbot@xxxxxxxxx>
• [tip:sched/core] nohz: Move idle balancer registration to the idle path
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/loadavg: Generalize "_idle" naming to "_nohz"
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:x86/boot] x86/debug: Extend the lower bound of crash kernel low reservations
  • From: tip-bot for Jiri Bohac <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Remove reset_lazy_tlbstate()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/ldt: Simplify the LDT switching logic
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf/x86/intel: Add 1G DTLB load/store miss support for SKL
  • From: tip-bot for Kan Liang <tipbot@xxxxxxxxx>
• [tip:x86/apic] x86/apic: Make arch_init_msi/htirq_domain __init
  • From: tip-bot for Dou Liyang <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/atomic: Add asm-generic/atomic-instrumented.h
  • From: tip-bot for Dmitry Vyukov <tipbot@xxxxxxxxx>
• [tip:x86/apic] x86/apic: Make init_legacy_irqs() __init
  • From: tip-bot for Dou Liyang <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/atomic/x86: Use 's64 *' for 'old' argument of atomic64_try_cmpxchg()
  • From: tip-bot for Dmitry Vyukov <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/atomic/x86: Un-macro-ify atomic ops implementation
  • From: tip-bot for Dmitry Vyukov <tipbot@xxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Fix uninitialized variable use in timer_of_init
  • From: tip-bot for Arnd Bergmann <tipbot@xxxxxxxxx>
• [tip:perf/core] perf tools: Fix message because cpu list option is -C not -c
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Remove redundant initial_skip checks
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf script: Fix message because field list option is -F not -f
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Fix transactions_sample_type
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Add decoder support for CBR events
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Add reserved byte to CBR packet payload
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Add decoder support for ptwrite and power event packets
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Add default config for pass-through branch enable
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Add documentation for new config terms
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Allow decoding with branch tracing disabled
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Add missing __fallthrough
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Use FUP always when scanning for an IP
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Clear FUP flag on error
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Fix last_ip usage
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Improve sample timestamp
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Fix missing stack clear
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf stat: Add support to measure SMI cost
  • From: tip-bot for Kan Liang <tipbot@xxxxxxxxx>
• [tip:perf/core] tools lib api fs: Add sysfs__write_int function
  • From: tip-bot for Kan Liang <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt: Move decoder error setting into one condition
  • From: tip-bot for Adrian Hunter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf unwind: Support for powerpc
  • From: tip-bot for Paolo Bonzini <tipbot@xxxxxxxxx>
• [tip:perf/core] perf tools: Remove unused _ALL_SOURCE define
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] perf tools: Do parameter validation earlier on fetch_kernel_version()
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] perf evsel: Adopt find_process()
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
  • From: tip-bot for Hendrik Brueckner <tipbot@xxxxxxxxx>
• [tip:irq/core] irq/generic-chip: Provide devm_irq_setup_generic_chip()
  • From: tip-bot for Bartosz Golaszewski <tipbot@xxxxxxxxx>
• [tip:irq/core] irq/generic-chip: Provide devm_irq_alloc_generic_chip()
  • From: tip-bot for Bartosz Golaszewski <tipbot@xxxxxxxxx>
• [tip:irq/core] irq/generic-chip: Export irq_init_generic_chip() locally
  • From: tip-bot for Bartosz Golaszewski <tipbot@xxxxxxxxx>
• [tip:irq/core] irq/generic-chip: Provide irq_destroy_generic_chip()
  • From: tip-bot for Bartosz Golaszewski <tipbot@xxxxxxxxx>
• [tip:irq/core] irq/generic-chip: Provide irq_free_generic_chip()
  • From: tip-bot for Bartosz Golaszewski <tipbot@xxxxxxxxx>
• [tip:timers/core] time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD
  • From: tip-bot for John Stultz <tipbot@xxxxxxxxx>
• [tip:timers/core] kselftests: timers: Add test for frequency step
  • From: tip-bot for Miroslav Lichvar <tipbot@xxxxxxxxx>
• [tip:timers/core] kselftests: timers: Fix inconsistency-check to not ignore first timestamp
  • From: tip-bot for Miroslav Lichvar <tipbot@xxxxxxxxx>
• [tip:timers/core] time: Clean up CLOCK_MONOTONIC_RAW time handling
  • From: tip-bot for John Stultz <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/MCE, xen/mcelog: Make /dev/mcelog registration messages more precise
  • From: tip-bot for Juergen Gross <tipbot@xxxxxxxxx>
• [tip:irq/urgent] irqchip/mips-gic: Mark count and compare accessors notrace
  • From: tip-bot for Marcin Nowakowski <tipbot@xxxxxxxxx>
• [tip:timers/core] itimer: Make timeval to nsec conversion range limited
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-cpu-timers: Make timespec to nsec conversion safe
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] timers: Fix parameter description of try_to_del_timer_sync()
  • From: tip-bot for Peter Meerwald-Stadler <tipbot@xxxxxxxxx>
• [tip:timers/core] ktime: Simplify ktime_compare implementation
  • From: tip-bot for Mariusz Skamra <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/64: Put __startup_64() into .head.text
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/microcode] x86/microcode/intel: Save pointer to ucode patch for early AP loading
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:x86/microcode] x86/microcode: Look for the initrd at the correct address on 32-bit
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:x86/debug] x86/nmi: Fix timeout test in test_nmi_ipi()
  • From: tip-bot for Dan Carpenter <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/fair: WARN() and refuse to set buddy when !se->on_rq
  • From: tip-bot for Daniel Axtens <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/core: Drop the unused try_get_task_struct() helper function
  • From: tip-bot for Davidlohr Bueso <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Improve the bit-wait API parameter names in the API function prototypes
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Standardize wait_bit_queue naming
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Standardize 'struct wait_bit_queue' wait-queue entry field name
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Standardize internal naming of wait-queue heads
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Standardize internal naming of wait-queue entries
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/wait: Rename wait_queue_t => wait_queue_entry_t
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/rtmutex: Don't initialize lockdep when not required
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:timers/urgent] clocksource: Explicitly include linux/clocksource.h when needed
  • From: tip-bot for Stephen Rothwell <tipbot@xxxxxxxxx>
• [tip:timers/urgent] clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
  • From: tip-bot for Frank Rowand <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Factor out clock read code
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Implement delay timer
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Add timer-of common init routine
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Optimize sched_clock()
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
  • From: tip-bot for Alexandre Belloni <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Add an alias macro CLOCKSOURCE_OF_DECLARE
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Rename CLKSRC_ACPI to TIMER_ACPI
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Rename CLKSRC_OF to TIMER_OF
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Rename clksrc table to timer
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Rename CLOCKSOURCE_ACPI_DECLARE to TIMER_ACPI_DECLARE
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers: Rename clocksource_probe to timer_probe
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] Revert "clockevents: Add a clkevt-of mechanism like clksrc-of"
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Fix aspeed-2500 initialization
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Merge Moxa into FTTMR010
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Add AST2500 compatible string
  • From: tip-bot for Daniel Lezcano <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Switch to use TIMER2 src
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Switch to use bitops
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Use state container
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Drop Gemini specifics
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Merge FTTMR010 DT bindings
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] clocksource/drivers/fttmr010: Fix the clock handling
  • From: tip-bot for Linus Walleij <tipbot@xxxxxxxxx>
• [tip:timers/core] arm: aspeed: Add clock-names property to timer node
  • From: tip-bot for Andrew Jeffery <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
  • From: tip-bot for Tony Lindgren <tipbot@xxxxxxxxx>
• [tip:x86/timers] x86/hpet: Do not use smp_processor_id() in preemptible code
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:perf/core] tools: Adopt __noreturn from kernel sources
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] perf script: Allow adding and removing fields
  • From: tip-bot for Andi Kleen <tipbot@xxxxxxxxx>
• [tip:perf/core] perf config: Invert an if statement to reduce nesting in cmd_config()
  • From: tip-bot for Taeung Song <tipbot@xxxxxxxxx>
• [tip:perf/core] perf report: Remove unnecessary check in annotate_browser_write()
  • From: tip-bot for Jin Yao <tipbot@xxxxxxxxx>
• [tip:perf/core] perf annotate browser: Display titles in left frame
  • From: tip-bot for Jin Yao <tipbot@xxxxxxxxx>
• [tip:perf/core] perf ftrace: Show error message when fails to set ftrace files
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/core] perf ftrace: Add option for function filtering
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/core] perf config: Check error cases of {show_spec, set}_config()
  • From: tip-bot for Taeung Song <tipbot@xxxxxxxxx>
• [tip:perf/core] perf ftrace: Add -D option for depth filter
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/core] perf config: Refactor the code using 'ret' variable in cmd_config()
  • From: tip-bot for Taeung Song <tipbot@xxxxxxxxx>
• [tip:perf/core] perf ftrace: Move setup_pager before opening trace_pipe
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/core] perf script: Support -F brstack,dso and brstacksym,dso
  • From: tip-bot for Mark Santaniello <tipbot@xxxxxxxxx>
• [tip:perf/core] perf intel-pt/bts: Remove unused SAMPLE_SIZE defines and bts priv array
  • From: tip-bot for Kim Phillips <tipbot@xxxxxxxxx>
• [tip:perf/core] perf test llvm: Avoid error when PROFILE_ALL_BRANCHES is set
  • From: tip-bot for Wang Nan <tipbot@xxxxxxxxx>
• [tip:perf/core] perf coresight: Remove superfluous check before use
  • From: tip-bot for Kim Phillips <tipbot@xxxxxxxxx>
• [tip:perf/core] perf script: Support -F brstackoff,dso
  • From: tip-bot for Mark Santaniello <tipbot@xxxxxxxxx>
• [tip:perf/core] perf annotate: Return arch from symbol__disassemble() and save it in browser
  • From: tip-bot for Jin Yao <tipbot@xxxxxxxxx>
• [tip:perf/core] tools: Adopt __scanf from kernel sources
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] tools: Adopt __printf from kernel sources
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] tools: Adopt __aligned from kernel sources
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] tools: Adopt __packed from kernel sources
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] tools: Adopt noinline from kernel sources
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] perf tools: Use __maybe_unused consistently
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:timers/urgent] time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
  • From: tip-bot for John Stultz <tipbot@xxxxxxxxx>
• [tip:timers/urgent] time: Fix clock->read(clock) race around clocksource changes
  • From: tip-bot for John Stultz <tipbot@xxxxxxxxx>
• [tip:timers/urgent] arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
  • From: tip-bot for Will Deacon <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf evsel: Fix probing of precise_ip level for default cycles event
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Fix build with ARCH=x86_64
  • From: tip-bot for Jiada Wang <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf unwind: Report module before querying isactivation in dwfl unwind
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:core/urgent] objtool: Add fortify_panic as __noreturn function
  • From: tip-bot for Kees Cook <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce/mce-inject: Preset the MCE injection struct
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce: Clean up include files
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce: Merge mce_amd_inj into mce-inject
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce: Get rid of register_mce_write_callback()
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce: Update bootlog description to reflect behavior on AMD
  • From: tip-bot for Yazen Ghannam <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce: Don't disable MCA banks when offlining a CPU on AMD
  • From: tip-bot for Yazen Ghannam <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce/AMD: Use saved threshold block info in interrupt handler
  • From: tip-bot for Yazen Ghannam <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce/AMD: Use msr_stat when clearing MCA_STATUS
  • From: tip-bot for Yazen Ghannam <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Make nanosleep timespec argument const
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-cpu-timers: Avoid timespec conversion in do_cpu_nanosleep()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] time: Move compat_gettimeofday()/settimeofday() to native
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] time: Move compat_time()/stime() to native
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Move compat_timer_create() to native, get rid of set_fs()
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Move compat versions of clock_gettime/settime/getres
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] itimers: Move compat itimer syscalls to native ones
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Take compat timer_gettime(2) to native one
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Take compat timer_settime(2) to native one
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] ntp: Move adjtimex related compat syscalls to native counterparts
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Kill ->nsleep_restart()
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] hrtimers/posix-timers: Merge nanosleep timespec copyout logics into a new helper
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] time/posix-timers: Move the compat copyouts to the nanosleep implementations
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Store rmtp into restart_block in sys_clock_nanosleep()
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] hrtimer: Move copyout of remaining time to do_nanosleep()
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] hrtimer_nanosleep(): Pass rmtp in restart_block
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Move copyout and freeze handling into alarmtimer_do_nsleep()
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-cpu-timers: Move copyout of timespec into do_cpu_nanosleep()
  • From: tip-bot for Al Viro <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Add support for 5-level paging for KASLR
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Make kernel_physical_mapping_init() support 5-level paging
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Add sync_global_pgds() for configuration with 5-level paging
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/64: Add support of additional page table level during early boot
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/64: Rename init_level4_pgt and early_level4_pgt
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/efi: Fix __KERNEL_CS definition of GDT entry on 64-bit configurations
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/64: Rewrite startup_64() in C
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/efi: Define __KERNEL32_CS GDT on 64-bit configurations
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/compressed: Enable 5-level paging during decompression stage
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/boot/efi: Cleanup initialization of GDT entries
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/asm: Fix comment in return_from_SYSCALL_64()
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Split read_cr3() into read_cr3_pa() and __read_cr3()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:timers/nohz] nohz: Fix spurious warning when hrtimer and clockevent get out of sync
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:x86/timers] x86/time: Make setup_default_timer_irq() static
  • From: tip-bot for Dou Liyang <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/mm: Disable 1GB direct mappings when disabling 2MB mappings
  • From: tip-bot for Vlastimil Babka <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove RCU CPU stall warnings from Tiny RCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove event tracing from Tiny RCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move RCU debug Kconfig options to kernel/rcu
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move RCU non-debug Kconfig options to kernel/rcu
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Eliminate NOCBs CPU-state Kconfig options
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove debugfs tracing
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Remove Classic SRCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Fix rcutorture-statistics typo
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove nohz_full full-system-idle state machine
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove SPARSE_RCU_POINTER Kconfig option
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove the now-obsolete PROVE_RCU_REPEATEDLY Kconfig option
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove the RCU_KTHREAD_PRIO Kconfig option
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove typecheck() from RCU locking wrapper functions
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove #ifdef moving rcu_end_inkernel_boot from rcupdate.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove *_SLOW_* Kconfig options
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Use rnp->lock wrappers to replace explicit memory barriers
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move rnp->lock wrappers for SRCU use
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Convert rnp->lock wrappers to macros for SRCU use
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] lockdep: Use consistent printing primitives
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Refactor #includes from include/linux/rcupdate.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] bcm47xx: Fix build regression
  • From: tip-bot for Arnd Bergmann <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Apply trivial callback lists to shrink Tiny SRCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Shrink srcu.h by moving docbook and private function
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Prevent sdp->srcu_gp_seq_needed counter wrap
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move rcutiny.h to new empty/true/false-function style
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move rcu_request_urgent_qs_task() out of rcutiny.h and rcutree.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move torture-related functions out of rcutiny.h and rcutree.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: move rcupdate.h to the new true/false-function style
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move rcu_ftrace_dump() from rcupdate.h to rcu.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move rcu_is_nocb_cpu() from rcupdate.h to rcu.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Improve __call_rcu() debug-objects error message
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove linux/debugobjects.h from rcupdate.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move the RCU_SCHEDULER_ definitions from rcupdate.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Eliminate the unused __rcu_is_watching() function
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move rcupdate.h to new empty-function style
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove UINT_CMP_GE() and UINT_CMP_LT()
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move torture-related definitions from rcupdate.h to rcu.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move expediting-related access/control out of rcupdate.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move rcu_expedited and rcu_normal externs from rcupdate.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Move docbook comments out of rcupdate.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Flag need for rcu_node_tree.h and rcu_segcblist.h visibility
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] sched: Rely on synchronize_rcu_mult() de-duplication
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Add memory barriers for NOCB leader wakeup
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Use RCU_NOCB_WAKE rather than RCU_NOGP_WAKE
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Make synchronize_rcu_mult() check for duplicates
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Add DEBUG_OBJECTS_RCU_HEAD functionality
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Make SRCU be once again optional
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Add lockdep_assert_held() teeth to tree_plugin.h
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Shrink Tiny SRCU a bit
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Add lockdep_assert_held() teeth to tree.c
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Print non-default exp_holdoff values at boot time
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Make exp_holdoff module parameter be static
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Update rcu_bootup_announce_oddness()
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Print out rcupdate.c non-default boot-time settings
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Add preemptibility checks in rcu_sched_qs() and rcu_bh_qs()
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] doc: Take tail recursion into account in RCU requirements
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu-cbmc: Use /usr/bin/awk instead of /bin/awk
  • From: tip-bot for Priyalee Kushwaha <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Document auto-expediting requirement
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Add "git diff" output to testid.txt file
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Add writer_holdoff boot parameter
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Set more user-friendly defaults
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Shrink Tiny SRCU a bit more
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Reduce CPUs dedicated to testing Classic SRCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Make Classic and Tree SRCU announce themselves at bootup
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] atomics: Add header comment so spin_unlock_wait()
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] docs: Fix typo in Documentation/memory-barriers.txt
  • From: tip-bot for Stan Drozd <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Add the ability to test tiny RCU flavors
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] doc/atomic_ops: Clarify smp_mb__{before,after}_atomic()
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Add test for dynamically initialized srcu_struct
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] checkpatch: Remove checks for expedited grace periods
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Make sync_rcu_preempt_exp_done() return bool
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Remove obsolete reference to synchronize_kernel()
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Add a Kconfig-fragment file for Classic SRCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Add ability to performance-test call_rcu() and friends
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Remove conflicting Kconfig options
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcuperf: Defer expedited/normal check to end of test
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Eliminate possibility of destructive counter overflow
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Complain if blocking in preemptible RCU read-side critical section
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Update test scenarios based on new Kconfig dependencies
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Correctly handle CONFIG_RCU_TORTURE_TEST_* options
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Prevent rcu_barrier() from starting needless grace periods
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Add a scenario for Classic SRCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Add a scenario for Tiny SRCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Fix bug in reporting Kconfig mis-settings
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Add three-level tree test for Tree SRCU
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcutorture: Add lockdep to one of the SRCU scenarios
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:irq/urgent] genirq: Release resources in __setup_irq() error path
  • From: tip-bot for Heiner Kallweit <tipbot@xxxxxxxxx>
• Re: [tip:timers/core] posix-timers: Zero out oldval itimerspec
  • From: Andrei Vagin <avagin@xxxxxxxxxxxxx>
• Re: [tip:timers/core] posix-timers: Zero out oldval itimerspec
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [tip:timers/core] posix-timers: Zero out oldval itimerspec
  • From: Andrei Vagin <avagin@xxxxxxxxxxxxx>
• [tip:x86/urgent] x86/debug: Handle early WARN_ONs proper
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Handle relative posix-timers correctly
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Zero out oldval itimerspec
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpu/hotplug: Remove unused check_for_tasks() function
  • From: tip-bot for Arnd Bergmann <tipbot@xxxxxxxxx>
• [tip:timers/urgent] tick/broadcast: Make tick_broadcast_setup_oneshot() static
  • From: tip-bot for Stephen Boyd <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Fix inverted SIGEV_NONE logic in common_timer_get()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/urgent] sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:sched/urgent] sched/fair: Fix typo in printk message
  • From: tip-bot for Marcin Nowakowski <tipbot@xxxxxxxxx>
• Re: [tip:timers/core] posix-timers: Zero settings value in common code
  • From: Andrei Vagin <avagin@xxxxxxxxxxxxx>
• [tip:efi/urgent] efi: Fix boot panic because of invalid BGRT image address
  • From: tip-bot for Dave Young <tipbot@xxxxxxxxx>
• [tip:rcu/urgent] srcu: Allow use of Classic SRCU from both process and interrupt context
  • From: tip-bot for Paolo Bonzini <tipbot@xxxxxxxxx>
• [tip:rcu/urgent] srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
  • From: tip-bot for Paolo Bonzini <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf symbols: Kill dso__build_id_is_kmod()
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf symbols: Keep DSO->symtab_type after decompress
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tests: Decompress kernel module before objdump
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Consolidate error path in __open_dso()
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Introduce dso__decompress_kmodule_{fd,path}
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Decompress kernel module when reading DSO data
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf annotate: Use dso__decompress_kmodule_path()
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf script python: Remove dups in documentation examples
  • From: tip-bot for SeongJae Park <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf script python: Fix wrong code snippets in documentation
  • From: tip-bot for SeongJae Park <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf script: Fix outdated comment for perf-trace-python
  • From: tip-bot for SeongJae Park <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Fix a memory leak in __open_dso()
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf annotate: Fix symbolic link of build-id cache
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf script python: Updated trace_unhandled() signature
  • From: tip-bot for SeongJae Park <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf script: Fix documentation errors
  • From: tip-bot for SeongJae Park <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf probe: Fix examples section of documentation
  • From: tip-bot for SeongJae Park <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/selftest: Add RT-mutex support
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:locking/core] MAINTAINERS: Claim atomic*_t maintainership
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/selftest: Remove the bad unlock ordering test
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:locking/core] rt_mutex: Add lockdep annotations
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:locking/core] locking/x86: Remove the unused atomic_inc_short() methd
  • From: tip-bot for Dmitry Vyukov <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks
  • From: tip-bot for Daniel Bristot de Oliveira <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Fix dl_bw comment
  • From: tip-bot for Daniel Bristot de Oliveira <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/idle: Add deferrable vmstat_updater back
  • From: tip-bot for Aubrey Li <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Add documentation about GRUB reclaiming
  • From: tip-bot for Claudio Scordino <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/core: Omit building stop_sched_class when !SMP
  • From: tip-bot for Nicolas Pitre <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Reclaim bandwidth not used by dl tasks
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Base GRUB reclaiming on the inactive utilization
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Zero out positive runtime after throttling constrained tasks
  • From: tip-bot for Xunlei Pang <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Track the "total rq utilization" too
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Make GRUB a task's flag
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Do not reclaim the whole CPU bandwidth
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Fix the update of the total -deadline utilization
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Implement GRUB accounting
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Track the active utilization
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Improve the tracking of active utilization
  • From: tip-bot for Luca Abeni <tipbot@xxxxxxxxx>
• [tip:perf/core] perf/core: Remove unused perf_cgroup_event_cgrp_time() function
  • From: tip-bot for Matthias Kaehlcke <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/core: Implement new approach to scale select_idle_cpu()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:perf/core] perf/core: Correct event creation with PERF_FORMAT_GROUP
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:perf/core] perf/core: Drop kernel samples even though :u is specified
  • From: tip-bot for Jin Yao <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/ldt: Rename ldt_struct::size to ::nr_entries
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/microcode/intel: Clear patch pointer before jettisoning the initrd
  • From: tip-bot for Dominik Brodowski <tipbot@xxxxxxxxx>
• [tip:x86/mm] mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf annotate: Add missing powerpc triplet
  • From: tip-bot for Kim Phillips <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf report: Ensure the perf DSO mapping matches what libdw sees
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf test: Disable breakpoint signal tests for powerpc
  • From: tip-bot for Jiri Olsa <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf report: Include partial stacks unwound with libdw
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf annotate: Fix branch instruction with multiple operands
  • From: tip-bot for Kim Phillips <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf symbols: Use correct filename for compressed modules in build-id cache
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf symbols: Set module info when build-id event found
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf header: Set proper module name when build-id event found
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf annotate: Fix failure when filename has special chars
  • From: tip-bot for Ravi Bangoria <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf trace: Add mmap alias for s390
  • From: tip-bot for Jiri Olsa <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf stat: Only print NMI watchdog hint when enabled
  • From: tip-bot for Andi Kleen <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/arm: Enable DMI/SMBIOS
  • From: tip-bot for Ard Biesheuvel <tipbot@xxxxxxxxx>
• [tip:efi/core] x86/efi: Extend CONFIG_EFI_PGT_DUMP support to x86_32 and kexec as well
  • From: tip-bot for Sai Praneeth <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule: Add support for Quark security header
  • From: tip-bot for Jan Kiszka <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/efi_test: Use memdup_user() helper
  • From: tip-bot for Geliang Tang <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule-loader: Use page addresses rather than struct page pointers
  • From: tip-bot for Ard Biesheuvel <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule-loader: Redirect calls to efi_capsule_setup_info() via weak alias
  • From: tip-bot for Ard Biesheuvel <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule: Remove NULL test on kmap()
  • From: tip-bot for Fabian Frederick <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule-loader: Use a cached copy of the capsule header
  • From: tip-bot for Ard Biesheuvel <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule: Fix return code on failing kmap/vmap
  • From: tip-bot for Jan Kiszka <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule: Adjust return type of efi_capsule_setup_info()
  • From: tip-bot for Jan Kiszka <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule: Remove pr_debug() on ENOMEM or EFAULT
  • From: tip-bot for Jan Kiszka <tipbot@xxxxxxxxx>
• [tip:efi/core] efi/capsule: Clean up pr_err/_info() messages
  • From: tip-bot for Jan Kiszka <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm, KVM: Teach KVM's VMX code that CR3 isn't a constant
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Be more consistent wrt PAGE_SHIFT vs PAGE_SIZE in tlb flush code
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Rework lazy TLB to track the actual loaded mm
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Use new merged flush logic in arch_tlbbatch_flush()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Refactor flush_tlb_mm_range() to merge local and remote cases
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Change the leave_mm() condition for local TLB flushes
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Pass flush_tlb_info to flush_tlb_others() etc
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:timers/nohz] nohz: Fix buggy tick delay on IRQ storms
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:x86/boot] x86/boot: Remove unused copy_*_gs() functions
  • From: tip-bot for Jiri Slaby <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/header: Remove leftover, obsolete comment
  • From: tip-bot for Perr Zhang <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Remove private kernel headers
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Hide liblockdep output from test results
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Add dummy current_gfp_context()
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/include: Add IS_ERR_OR_NULL to err.h
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Add empty __is_[module,kernel]_percpu_address
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Include err.h
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Use LDFLAGS
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/include: Add (mostly) empty include/linux/sched/mm.h
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Remove double-quotes from soname
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Fix object file paths used in an out-of-tree build
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Don't mix fd-based and stream IO
  • From: tip-bot for Alexander Sverdlin <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Fix compilation for 4.11
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools: Add install make target for liblockdep
  • From: tip-bot for Alexander Sverdlin <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Remove -lpthread compiler option
  • From: tip-bot for Vishal Thanki <tipbot@xxxxxxxxx>
• [tip:locking/core] MAINTAINERS: Update email for Sasha Levin
  • From: "tip-bot for Levin, Alexander (Sasha Levin)" <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Fix 'defined but not used' warning for init_utsname()
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Fix 'set but not used' warnings
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Fix 'unused value' warnings
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Enable -Wall by default
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Define the ARRAY_SIZE() macro
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:locking/core] tools/lib/lockdep: Fix undefined symbol prandom_u32
  • From: tip-bot for Ben Hutchings <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Switch over to generic set/get/rearm routine
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Implement arm callback
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Implement try_to_cancel callback
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Implement remaining callback
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Implement forward callback
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Implement timer_rearm() callback
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Make use of cancel/arm callbacks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Add cancel/arm callbacks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Zero settings value in common code
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Make use of forward/remaining callbacks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Add forward/remaining callbacks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Add active flag to k_itimer
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Use timer_rearm() callback in posixtimer_rearm()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Rename do_schedule_next_timer
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Add timer_rearm() callback
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Store k_clock pointer in k_itimer
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Move interval out of the union
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Unify overrun/requeue_pending handling
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Move posix-timer internals to core
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Cleanup struct k_itimer
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Avoid gazillions of forward declarations
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-clocks: Remove interval timer facility and mmap/fasync callbacks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Remove unused export of posix_timer_event()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Remove pointless config conditional
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] signal: Remove non-uapi <asm/siginfo.h>
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:timers/core] signal: Move copy_siginfo_to_user to <linux/signal.h>
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Move the do_schedule_next_timer declaration
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:timers/core] ia64: Remove HAVE_ARCH_COPY_SIGINFO
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:timers/core] sparc: Simplify <asm/siginfo.h>
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:x86/timers] x86/tsc: Remove the TSC_ADJUST clamp
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:x86/timers] x86/apic: Add TSC_DEADLINE quirk due to errata
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:x86/timers] x86/apic: Change the lapic name in deadline mode
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:timers/urgent] alarmtimer: Rate limit periodic intervals
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/urgent] alarmtimer: Prevent overflow of relative timers
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/urgent] alarmtimer: Rate limit periodic intervals
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/urgent] alarmtimer: Prevent overflow of relative timers
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:irq/core] genirq: Warn when IRQ_NOAUTOEN is used with shared interrupts
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:irq/core] genirq: Handle NOAUTOEN interrupt setup proper
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/urgent] cpu/hotplug: Drop the device lock on error
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] perf/core: Don't release cred_guard_mutex if not taken
  • From: tip-bot for Alexander Levin <tipbot@xxxxxxxxx>
• [tip:x86/urgent] Revert "x86/PAT: Fix Xorg regression on CPUs that don't support PAT"
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:x86/boot] x86/KASLR: Use the right memcpy() implementation
  • From: tip-bot for Arnd Bergmann <tipbot@xxxxxxxxx>
• [tip:timers/nohz] nohz: Reset next_tick cache even when the timer has no regs
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/debug/32: Convert a smp_processor_id() call to raw to avoid DEBUG_PREEMPT warning
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:efi/urgent] x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled
  • From: tip-bot for Baoquan He <tipbot@xxxxxxxxx>
• [tip:efi/urgent] efi/bgrt: Skip efi_bgrt_init() in case of non-EFI boot
  • From: tip-bot for Dave Young <tipbot@xxxxxxxxx>
• [tip:efi/urgent] x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map
  • From: tip-bot for Sai Praneeth <tipbot@xxxxxxxxx>
• [tip:efi/urgent] efi: Remove duplicate 'const' specifiers
  • From: tip-bot for Arnd Bergmann <tipbot@xxxxxxxxx>
• [tip:efi/urgent] efi: Don't issue error message when booted under Xen
  • From: tip-bot for Juergen Gross <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Remove mmtimer leftovers
  • From: tip-bot for Dimitri Sivanich <tipbot@xxxxxxxxx>
• [tip:timers/core] alarmtimer: Fix posix-timer constification fallout
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Make posix_clocks immutable
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• Re: [tip:timers/core] mmtimer: Remove the SGI SN2 mmtimer driver
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [tip:x86/apic] x86/ioapic: Remove unused IO_APIC_irq_trigger() function
  • From: tip-bot for Matthias Kaehlcke <tipbot@xxxxxxxxx>
• [tip:irq/core] genirq: Make early_irq_init() print out more informative
  • From: tip-bot for Vincent Legoll <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Make posix_clocks immutable
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Make posix_clocks immutable
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
  • From: tip-bot for Jan Kiszka <tipbot@xxxxxxxxx>
• [tip:timers/core] posix-timers: Make posix_clocks immutable
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:timers/core] mmtimer: Remove the SGI SN2 mmtimer driver
  • From: tip-bot for Christoph Hellwig <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpuhotplug: Link lock stacks for hotplug callbacks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] acpi/processor: Prevent cpu hotplug deadlock
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] arm: Prevent hotplug rwsem recursion
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] sched: Provide is_percpu_thread() helper
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpu/hotplug: Convert hotplug locking to percpu rwsem
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] s390: Prevent hotplug rwsem recursion
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] jump_label: Reorder hotplug lock and jump_label_lock
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] arm64: Prevent cpu hotplug rwsem recursion
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] kprobes: Cure hotplug lock ordering issues
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] perf/tracing/cpuhotplug: Fix locking order
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] PCI: Replace the racy recursion prevention
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] x86/perf: Drop EXPORT of perf_check_microcode
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpu/hotplug: Use stop_machine_cpuslocked() in takedown_cpu()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] powerpc/powernv: Use stop_machine_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] ARM/hw_breakpoint: Use cpuhp_setup_state_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] s390/kernel: Use stop_machine_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] hwtracing/coresight-etm4x: Use cpuhp_setup_state_nocalls_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] perf/x86/intel/cqm: Use cpuhp_setup_state_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] hwtracing/coresight-etm3x: Use cpuhp_setup_state_nocalls_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] KVM/PPC/Book3S HV: Use cpuhp_setup_state_nocalls_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpufreq: Use cpuhp_setup_state_nocalls_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] x86/mtrr: Remove get_online_cpus() from mtrr_save_state()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] padata: Avoid nested calls to cpus_read_lock() in pcrypt_init_padata()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] padata: Make padata_alloc() static
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] stop_machine: Provide stop_machine_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpu/hotplug: Add __cpuhp_state_add_instance_cpuslocked()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpu/hotplug: Provide lockdep_assert_cpus_held()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpu/hotplug: Provide cpuhp_setup/remove_state[_nocalls]_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] cpu/hotplug: Provide cpus_read|write_[un]lock()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• Re: [tip:x86/debug] x86/timers: Add simple udelay calibration
  • From: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
• Re: [tip:x86/debug] x86/timers: Add simple udelay calibration
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [tip:x86/urgent] x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()
  • From: tip-bot for Mateusz Jurczyk <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/build: Permit building with old make versions
  • From: tip-bot for Jan Kiszka <tipbot@xxxxxxxxx>
• [tip:x86/urgent] Revert "x86/entry: Fix the end of the stack for newly forked tasks"
  • From: tip-bot for Josh Poimboeuf <tipbot@xxxxxxxxx>
• [tip:x86/boot] Documentation/kernel-parameters.txt: Update 'memmap=' boot option description
  • From: tip-bot for Baoquan He <tipbot@xxxxxxxxx>
• [tip:x86/boot] x86/KASLR: Handle the memory limit specified by the 'memmap=' and 'mem=' boot options
  • From: tip-bot for Baoquan He <tipbot@xxxxxxxxx>
• [tip:x86/mm] mm, x86/mm: Make the batched unmap TLB flush API more generic
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Reduce indentation in flush_tlb_func()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Reimplement flush_tlb_page() using flush_tlb_mm_range()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/PAT: Fix Xorg regression on CPUs that don't support PAT
  • From: tip-bot for Mikulas Patocka <tipbot@xxxxxxxxx>
• [tip:x86/boot] x86/KASLR: Parse all 'memmap=' boot option entries
  • From: tip-bot for Baoquan He <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation
  • From: tip-bot for Benjamin Peterson <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/unwind: Add end-of-stack check for ftrace handlers
  • From: tip-bot for Josh Poimboeuf <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/clock: Fix early boot preempt assumption in __set_sched_clock_stable()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:perf/urgent] tools/include: Sync kernel ABI headers with tooling headers
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Put caller above callee in --children mode
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf report: Do not drop last inlined frame
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf report: Fix memory leak in addr2line when called by addr2inlines
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf report: Always honor callchain order for inlined nodes
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf script: Add --inline option for debugging
  • From: tip-bot for Namhyung Kim <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf report: Fix off-by-one for non-activation frames
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf report: Don't crash on invalid maps in `-g srcline` mode
  • From: tip-bot for Milian Wolff <tipbot@xxxxxxxxx>
• [tip:timers/urgent] posix-timers: Make signal printks conditional
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] powerpc: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/core: Enable might_sleep() and smp_processor_id() checks early
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] x86/tsc: Fold set_cyc2ns_scale() into caller
  • From: tip-bot for Arnd Bergmann <tipbot@xxxxxxxxx>
• [tip:sched/core] init: Introduce SYSTEM_SCHEDULING state
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] mm/vmscan: Adjust system_state checks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] printk: Adjust system_state checks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] extable: Adjust system_state checks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] iommu/of: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] iommu/vt-d: Adjust system_state checks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] async: Adjust system_state checks
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] cpufreq/pasemi: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] mm: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] ACPI: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] arm: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] metag: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] x86/smp: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] arm64: Adjust system_state check
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] init: Pin init task to the boot CPU, initially
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/rt: Minimize rq->lock contention in do_sched_rt_period_timer()
  • From: tip-bot for Dave Kleikamp <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/numa: Use down_read_trylock() for the mmap_sem
  • From: tip-bot for Vlastimil Babka <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/core: Allow __sched_setscheduler() in interrupts when PI is not used
  • From: "tip-bot for Steven Rostedt (VMware)" <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/deadline: Remove unnecessary condition in push_dl_task()
  • From: tip-bot for Byungchul Park <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/rt: Remove unnecessary condition in push_rt_task()
  • From: tip-bot for Byungchul Park <tipbot@xxxxxxxxx>
• [tip:sched/core] smp: Avoid sending needless IPI in smp_call_function_many()
  • From: tip-bot for Aaron Lu <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/core: Use the new llist_for_each_entry_safe() primitive
  • From: tip-bot for Byungchul Park <tipbot@xxxxxxxxx>
• [tip:sched/core] llist: Provide a safe version for llist_for_each()
  • From: tip-bot for Byungchul Park <tipbot@xxxxxxxxx>
• [tip:sched/core] smp, cpumask: Use non-atomic cpumask_{set,clear}_cpu()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:perf/core] perf/core: Fix error handling in perf_event_alloc()
  • From: tip-bot for Dan Carpenter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf/core: Remove some dead code
  • From: tip-bot for Dan Carpenter <tipbot@xxxxxxxxx>
• [tip:perf/core] perf/x86: Add sysfs entry to freeze counters on SMI
  • From: tip-bot for Kan Liang <tipbot@xxxxxxxxx>
• [tip:irq/core] x86/ioapic: Remove unused IO_APIC_irq_trigger() function
  • From: tip-bot for Matthias Kaehlcke <tipbot@xxxxxxxxx>
• [tip:irq/core] Documentation: Update IRQ-domain.txt to document irq_domain_mapping
  • From: tip-bot for Marc Zyngier <tipbot@xxxxxxxxx>
• [tip:irq/core] genirq/msi: Populate the domain name if provided by the irqchip
  • From: tip-bot for Marc Zyngier <tipbot@xxxxxxxxx>
• [tip:irq/core] irqdomain: Let irq_domain_mapping display ACPI fwnode attributes
  • From: tip-bot for Marc Zyngier <tipbot@xxxxxxxxx>
• [tip:irq/core] irqdomain: Let irq_domain_mapping display hierarchical domains
  • From: tip-bot for Marc Zyngier <tipbot@xxxxxxxxx>
• [tip:core/urgent] kthread: Fix use-after-free if kthread fork fails
  • From: tip-bot for Vegard Nossum <tipbot@xxxxxxxxx>
• [tip:locking/urgent] futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce: Convert threshold_bank.cpus from atomic_t to refcount_t
  • From: tip-bot for Elena Reshetova <tipbot@xxxxxxxxx>
• [tip:ras/core] ACPI/APEI: Handle GSIV and GPIO notification types
  • From: tip-bot for Shiju Jose <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce/AMD: Carve out SMCA bank configuration
  • From: tip-bot for Yazen Ghannam <tipbot@xxxxxxxxx>
• [tip:ras/core] x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers
  • From: tip-bot for Yazen Ghannam <tipbot@xxxxxxxxx>
• [tip:ras/core] RAS: Make local function parse_ras_param() static
  • From: tip-bot for Wei Yongjun <tipbot@xxxxxxxxx>
• [tip:ras/urgent] acpi, nfit: Fix the memory error check in nfit_handle_mce()
  • From: tip-bot for Vishal Verma <tipbot@xxxxxxxxx>
• [tip:ras/urgent] x86/MCE: Export memory_error()
  • From: tip-bot for Borislav Petkov <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/boot: Use CROSS_COMPILE prefix for readelf
  • From: tip-bot for Rob Landley <tipbot@xxxxxxxxx>
• Delivery Status Notification
  • From: losherm3@xxxxxxxxxxxxxxxxx
• [tip:timers/nohz] nohz: Reset next_tick cache even when the timer has no regs
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:timers/nohz] nohz: Fix collision between tick and other hrtimers, again
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:timers/nohz] nohz: Add hrtimer sanity check
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:irq/urgent] genirq: Fix chained interrupt data ordering
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/fair: Fix O(nr_cgroups) in load balance path
  • From: tip-bot for Tejun Heo <tipbot@xxxxxxxxx>
• Re: [tip:sched/core] sched/fair: Fix O(nr_cgroups) in load balance path
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [tip:sched/core] sched/fair: Fix O(nr_cgroups) in load balance path
  • From: tip-bot for Tejun Heo <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/fair: Use task_groups instead of leaf_cfs_rq_list to walk all cfs_rqs
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Rename sched_group_cpus()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Rename sched_group_mask()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Simplify sched_group_mask() usage
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Rewrite get_group()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Add a few comments
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Fix overlapping sched_group_capacity
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Add sched_group_capacity debugging
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Small cleanup
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Fix overlapping sched_group_mask
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Remove FORCE_SD_OVERLAP
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Move comment about asymmetric node setups
  • From: tip-bot for Lauro Ramos Venancio <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Optimize build_group_mask()
  • From: tip-bot for Lauro Ramos Venancio <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Verify the first group matches the child domain
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/debug: Print the scheduler topology group mask
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Simplify build_overlap_sched_groups()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Fix building of overlapping sched-groups
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/fair, cpumask: Export for_each_cpu_wrap()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/topology: Refactor function build_overlap_sched_groups()
  • From: tip-bot for Lauro Ramos Venancio <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/clock: Print a warning recommending 'tsc=unstable'
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/core: Call __schedule() from do_idle() without enabling preemption
  • From: "tip-bot for Steven Rostedt (VMware)" <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/clock: Use late_initcall() instead of sched_init_smp()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] cpuidle: Fix idle time tracking
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/clock: Remove watchdog touching
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/clock: Remove unused argument to sched_clock_idle_wakeup_event()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] x86/tsc, sched/clock, clocksource: Use clocksource watchdog to provide stable sync points
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/clock: Initialize all per-CPU state before switching (back) to unstable
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] x86/tsc: Feed refined TSC calibration into sched_clock()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] x86/tsc: Fix sched_clock() sync
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] x86/tsc: Remodel cyc2ns to use seqcount_latch()
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:sched/core] sched/cfs: Make util/load_avg more stable
  • From: tip-bot for Vincent Guittot <tipbot@xxxxxxxxx>
• [tip:sched/core] x86/tsc: Provide 'tsc=unstable' boot parameter
  • From: tip-bot for Peter Zijlstra <tipbot@xxxxxxxxx>
• [tip:irq/urgent] irqchip/mbigen: Fix potential NULL dereferencing
  • From: tip-bot for Hanjun Guo <tipbot@xxxxxxxxx>
• [tip:irq/urgent] irqchip/mbigen: Fix the clear register offset calculation
  • From: tip-bot for MaJun <tipbot@xxxxxxxxx>
• [tip:irq/urgent] irqchip/mbigen: Fix memory mapping code
  • From: tip-bot for Hanjun Guo <tipbot@xxxxxxxxx>
• Re: [tip:smp/hotplug] trace/perf: Cure hotplug lock ordering issues
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [tip:perf/urgent] perf/callchain: Force USER_DS when invoking perf_callchain_user()
  • From: tip-bot for Will Deacon <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/intel_rdt: Fix a typo in Documentation
  • From: tip-bot for Xiaochen Shen <tipbot@xxxxxxxxx>
• [tip:timers/urgent] clocksource/arm_arch_timer: Fix arch_timer_mem_find_best_frame()
  • From: tip-bot for Sudeep Holla <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/boot/32: Fix UP boot on Quark and possibly other platforms
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/build: Don't add -maccumulate-outgoing-args w/o compiler support
  • From: tip-bot for Nick Desaulniers <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
  • From: tip-bot for Laura Abbott <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/mm: Add support for gbpages to kernel_ident_mapping_init()
  • From: tip-bot for Xunlei Pang <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/kexec/64: Use gbpages for identity mappings if available
  • From: tip-bot for Xunlei Pang <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/boot: Declare error() as noreturn
  • From: tip-bot for Kees Cook <tipbot@xxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: hpa@xxxxxxxxx
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Michael Davidson <md@xxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: hpa@xxxxxxxxx
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [tip:x86/urgent] x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
  • From: tip-bot for Matthias Kaehlcke <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()
  • From: tip-bot for Josh Poimboeuf <tipbot@xxxxxxxxx>
• [tip:x86/urgent] x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
  • From: tip-bot for Baoquan He <tipbot@xxxxxxxxx>
• [tip:core/urgent] stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms
  • From: tip-bot for Daniel Micay <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf annotate: Fix AArch64 comment char
  • From: tip-bot for Kim Phillips <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tests kmod-path: Don't fail if compressed modules aren't supported
  • From: tip-bot for Kim Phillips <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Fix spelling mistakes
  • From: tip-bot for Kim Phillips <tipbot@xxxxxxxxx>
• [tip:perf/urgent] tools build: Fixup sched_getcpu feature test
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf config: Refactor a duplicated code for obtaining config file name
  • From: tip-bot for Taeung Song <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf symbols: Allow user probes on versioned symbols
  • From: tip-bot for Paul Clarke <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf symbols: Accept symbols starting at address 0
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] tools lib string: Adopt prefixcmp() from perf and subcmd
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf units: Move parse_tag_value() to units.[ch]
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Move HAS_BOOL define to where perl headers are used
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf memswap: Split the byteswap memory range wrappers from util.[ch]
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf ui gtk: Move gtk .so name to the only place where it is used
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf tools: Move event prototypes from util.h to event.h
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf buildid: Move prototypes from util.h to build-id.h
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/urgent] perf/x86: Fix Broadwell-EP DRAM RAPL events
  • From: tip-bot for Vince Weaver <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Open-code the rcu_cblist_n_lazy_cbs() function
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Open-code the rcu_cblist_n_cbs() function
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Separately compile large rcu_segcblist functions
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] rcu: Open-code the rcu_cblist_empty() function
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Debloat the <linux/rcu_segcblist.h> header
  • From: tip-bot for Ingo Molnar <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] perf: Push hotplug protection down to callers
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] perf: Reorder cpu hotplug rwsem against cred_guard_mutex
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:x86/mm] mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
  • From: tip-bot for Dan Williams <tipbot@xxxxxxxxx>
• [tip:x86/urgent] Prevent timer value 0 for MWAITX
  • From: tip-bot for Janakarajan Natarajan <tipbot@xxxxxxxxx>
• [tip:irq/core] irqchip/mbigen: Fix return value check in mbigen_device_probe()
  • From: tip-bot for Wei Yongjun <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] arm64/cpufeature: Use static_branch_enable_cpuslocked()
  • From: tip-bot for Mark Rutland <tipbot@xxxxxxxxx>
• [tip:smp/hotplug] jump_label: Provide static_key_[enable|/slow_inc]_cpuslocked()
  • From: tip-bot for Sebastian Andrzej Siewior <tipbot@xxxxxxxxx>
• [tip:x86/boot] x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
  • From: tip-bot for Baoquan He <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Adjust default auto-expediting holdoff
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:sched/urgent] sched/cputime: Fix ksoftirqd cputime accounting regression
  • From: tip-bot for Frederic Weisbecker <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Specify auto-expedite holdoff time
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Expedited grace periods with reduced memory contention
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Expedite first synchronize_srcu() when idle
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Make rcutorture writer stalls print SRCU GP state
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Exact tracking of srcu_data structures containing callbacks
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Fix flush_tlb_page() on Xen
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Make flush_tlb_mm_range() more predictable
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm: Remove flush_tlb() and flush_tlb_current_task()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
  • From: tip-bot for Andy Lutomirski <tipbot@xxxxxxxxx>
• [tip:x86/asm] x86/unwind: Dump all stacks in unwind_dump()
  • From: tip-bot for Josh Poimboeuf <tipbot@xxxxxxxxx>
• [tip:x86/asm] x86/unwind: Silence more entry-code related warnings
  • From: tip-bot for Josh Poimboeuf <tipbot@xxxxxxxxx>
• [tip:x86/mm] x86/mm/64: Fix crash in remove_pagetable()
  • From: "tip-bot for Kirill A. Shutemov" <tipbot@xxxxxxxxx>
• [tip:core/rcu] srcu: Make SRCU be built by default
  • From: "tip-bot for Paul E. McKenney" <tipbot@xxxxxxxxx>
• Re: [tip:x86/boot] x86/boot/e820: Basic cleanup of e820.c
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Re: get_zone_device_page() in get_page() and page_cache_get_speculative()
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: get_zone_device_page() in get_page() and page_cache_get_speculative()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• Re: [tip:x86/mm] x86: Convert the rest of the code to support p4d_t
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• Re: [tip:x86/mm] x86: Convert the rest of the code to support p4d_t
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [tip:x86/mm] x86: Convert the rest of the code to support p4d_t
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [tip:smp/hotplug] trace: Prevent CPU hotplug in trace_event_enable_cmd_record()
  • From: tip-bot for Thomas Gleixner <tipbot@xxxxxxxxx>
• [tip:perf/core] perf tools: Fix the code to strip command name
  • From: tip-bot for Jiri Olsa <tipbot@xxxxxxxxx>
• [tip:perf/core] tools arch x86: Sync cpufeatures.h
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>
• [tip:perf/core] tools: Update asm-generic/mman-common.h copy from the kernel
  • From: tip-bot for Arnaldo Carvalho de Melo <tipbot@xxxxxxxxx>