Remove the use of phy_set_max_speed in phy driver as the
function is mainly used in MAC driver to set the max
speed.
Instead use get_features to fix up Phy PMA capabilities for
AQR111, AQR111B0, AQR114C and AQCS109
Fixes: 038ba1dc4e54 ("net: phy: aquantia: add AQR111 and AQR111B0 PHY ID")
Fixes: 0974f1f03b07 ("net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109")
Fixes: c278ec644377 ("net: phy: aquantia: add support for AQR114C PHY ID")
Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@xxxxxxxxxxx/T/
Signed-off-by: Abhishek Chauhan <quic_abchauha@xxxxxxxxxxx>
---
Changes since v2
1. seperate out the changes into two different patches.
2. remove usage of phy_set_max_speed from the aquantia driver
3. use phy_gbit_features instead of initializing each and
every link mode bits.
4. write seperate functions for 5Gbps supported phy
5. remove FIBRE bit which was introduced in patch 1
Changes since v1
1. remove usage of phy_set_max_speed in the aquantia driver code.
2. Introduce aqr_custom_get_feature which checks for the phy id and
takes necessary actions based on max_speed supported by the phy
3. remove aqr111_config_init as it is just a wrapper function.
drivers/net/phy/aquantia/aquantia_main.c | 53 +++++++++++++++---------
1 file changed, 34 insertions(+), 19 deletions(-)
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 88ba12aaf6e0..c508f63f7fac 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -527,12 +527,6 @@ static int aqcs109_config_init(struct phy_device *phydev)
if (!ret)
aqr107_chip_info(phydev);
- /* AQCS109 belongs to a chip family partially supporting 10G and 5G.
- * PMA speed ability bits are the same for all members of the family,
- * AQCS109 however supports speeds up to 2.5G only.
- */
- phy_set_max_speed(phydev, SPEED_2500);
-
return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
}
@@ -741,6 +735,33 @@ static int aqr113c_config_init(struct phy_device *phydev)
return aqr113c_fill_interface_modes(phydev);
}
+static int aqr111_get_features(struct phy_device *phydev)
+{
+ int ret;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
+
+ /* Normal feature discovery */
+ ret = genphy_c45_pma_read_abilities(phydev);
+ if (ret)
+ return ret;
+
+ /* PHY FIXUP */
+ /* Although the PHY sets bit 12.18.19, it does not support 10G modes */
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported);
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, phydev->supported);
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, phydev->supported);
+
+ /* Phy supports Speeds up to 5G with Autoneg though the phy PMA says otherwise */
+ linkmode_copy(supported, phy_gbit_features);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, supported);
+
+ linkmode_or(phydev->supported, supported, phydev->supported);
+
+ return 0;
+}
+
static int aqr107_probe(struct phy_device *phydev)
{
int ret;
@@ -757,16 +778,6 @@ static int aqr107_probe(struct phy_device *phydev)
return aqr_hwmon_probe(phydev);
}
-static int aqr111_config_init(struct phy_device *phydev)
-{
- /* AQR111 reports supporting speed up to 10G,
- * however only speeds up to 5G are supported.
- */
- phy_set_max_speed(phydev, SPEED_5000);
-
- return aqr107_config_init(phydev);
-}
-
static int aqr115c_get_features(struct phy_device *phydev)
{
int ret;
@@ -870,6 +881,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr115c_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
@@ -882,7 +894,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR111",
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
+ .config_init = aqr107_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -894,6 +906,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr111_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
@@ -906,7 +919,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR111B0",
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
+ .config_init = aqr107_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -918,6 +931,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr111_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
@@ -1027,7 +1041,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR114C",
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
+ .config_init = aqr107_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -1039,6 +1053,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr111_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
--
2.25.1
