On 17/01/2023 18:16, Jon Hunter wrote: > > On 16/01/2023 19:03, Krzysztof Kozlowski wrote: >> On 16/01/2023 16:50, Jon Hunter wrote: >>> From: Wayne Chang <waynec@xxxxxxxxxx> >>> >>> add device-tree binding documentation for Cypress cypd4226 type-C >>> controller's I2C interface. It is a standard i2c slave with GPIO >>> input as IRQ interface. >>> >>> Signed-off-by: Wayne Chang <waynec@xxxxxxxxxx> >>> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx> >>> --- >>> V3 -> V4: no changes >>> V2 -> V3: fix additionalProperties warning on new schema >>> V1 -> V2: based on the review comments. Fix some addressed issues on >>> >>> .../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++ >>> 1 file changed, 86 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml >>> >>> diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml >>> new file mode 100644 >>> index 000000000000..5ac28ab4e7a1 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml >>> @@ -0,0 +1,86 @@ >>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Cypress cypd4226 UCSI I2C Type-C Controller >>> + >>> +maintainers: >>> + - Wayne Chang <waynec@xxxxxxxxxx> >>> + >>> +description: | >>> + The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C >>> + controller. >>> + >>> +properties: >>> + compatible: >>> + const: cypress,cypd4226 >>> + >>> + '#address-cells': >>> + const: 1 >>> + >>> + '#size-cells': >>> + const: 0 >>> + >>> + reg: >>> + const: 0x08 >>> + >>> + interrupts: >>> + maxItems: 1 >>> + >>> + cypress,firmware-build: >>> + enum: >>> + - nv >>> + - gn >>> + description: | >>> + the name of the CCGx firmware built for product series. >>> + should be set one of following: >>> + - "nv" for the RTX product series >>> + - "gn" for the Jetson product series >> >> This is a friendly reminder during the review process. >> >> It seems my previous comments were not fully addressed. Maybe my >> feedback got lost between the quotes, maybe you just forgot to apply it. >> Please go back to the previous discussion and either implement all >> requested changes or keep discussing them. > > > Thanks. Apologies for this. I will sort this out in the next revision. These could have been comments from Rob about this property. Best regards, Krzysztof
