Re: [PATCH 1/4] dt-bindings: display: Add bindings for JDI LPM102A188A

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/10/2022 19:06, Diogo Ivo wrote:
> On Fri, Sep 30, 2022 at 12:49:31PM +0200, Krzysztof Kozlowski wrote:
>>> +  ts-reset-gpios:
>>> +    maxItems: 1
>>> +    description: |
>>> +      Specifier for a GPIO connected to the touchscreen reset control signal.
>>> +      The reset signal is active low.
>>
>> Isn't touchscreen a separate (input) device?
> 
> Hello, thank you for the feedback.
> 
> According to the downstream kernel's log, it seems like the panel and
> the touchscreen controller are considered to be embedded in the same unit
> (for example in [1]), 

Downstream kernel is not a proof of proper description of hardware. If
downstream says orange is an apple, does it mean orange is really an
apple? No... Downstream creates a lot of junk, hacks and workarounds.

> with the touch input being transmitted via HID-over-I2C,
> and since I did not find any reset gpio handling in that driver I opted to
> include this reset here, unless there is a better way of going about this.

Instead it should be in touch screen device.

> 
> Best regards,
> 
> Diogo
> 
> [1]: https://android.googlesource.com/kernel/tegra/+/bca61c34db9f72113af058f53eeb9fbd5e69a1d0

Where is the DTS of that device?

Best regards,
Krzysztof




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux